[1] [1] Brinksmeier E, Karpuschewski B, Yan J W and Schnemann L 2020 Manufacturing of multiscale structured surfaces CIRP Ann.69 717–39

[2] [2] Evans C J and Bryan J B 1999 Structured”, “textured” or “engineered” surfaces CIRP Ann.48 541–56

[3] [3] Zhou T F, He Y P, Wang T X, Zhu Z C, Xu R Z, Yu Q, Zhao B, Zhao W X, Liu P and Wang X B 2021 A review of the techniques for the mold manufacturing of micro/nanostructures for precision glass molding Int. J. Extreme Manuf.3 042002

[4] [4] Zhang X Q, Huang R, Liu K, Kumar A S and Shan X C 2018 Rotating-tool diamond turning of fresnel lenses on a roller mold for manufacturing of functional optical film Precis. Eng.51 445–57

[5] [5] Wang J Y, Lang T H, Liu H, Sun G C, Chen X Y, Li Y P, Wang R, Cui B W and Yuan H Y 2021 A novel method of manufacturing a microchannel with integrating three-dimensional microstructure arrays for mixing experiment AIP Adv.11 095010

[6] [6] Scheiding S, Yi A Y, Gebhardt A, Loose R, Li L, Risse S, Eberhardt R and Tnnermann A 2011 Diamond milling or turning for the fabrication of micro lens arrays: comparing different diamond machining technologies Proc. SPIE7927 79270N

[7] [7] Sun Z W, To S, Wang S J and Du J J 2020 Development of self-tuned diamond milling system for fabricating infrared micro-optics arrays with enhanced surface uniformity and machining efficiency Opt. Express28 2221–37

[8] [8] Zhang L, Yi A Y and Yan J W 2022 Flexible fabrication of fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding Precis. Eng.74 186–94

[9] [9] Ning P X, Zhao J, Ji S J, Li J J and Dai H D 2021 Ultra-precision single-point diamond turning of a complex sinusoidal mesh surface using machining accuracy active control J. Mech. Eng.67 343–51

[10] [10] Li D, Wang B, Qiao Z and Jiang X Q 2019 Ultraprecision machining of microlens arrays with integrated on-machine surface metrology Opt. Express27 212–24

[11] [11] Wu B and Zong W J 2022 A modified diamond micro chiseling method for machining large scale retroreflective microstructure on nickel phosphorus alloy J. Mater. Process. Technol.307 117676

[12] [12] Brinksmeier E, Glbe R and Schnemann L 2012 Diamond micro chiseling of large-scale retroreflective arrays Precis. Eng.36 650–7

[13] [13] O'Hara J and Fang F Z 2019 Advances in micro cutting tool design and fabrication Int. J. Extreme Manuf.1 032003

[14] [14] Obata K 2016 Single-crystal diamond cutting tool for ultra-precision processing SEI Tech. Rev.82 82–88

[15] [15] Brinksmeier E 2014 Ultraprecision machining In CIRP Encyclopedia of Production Engineering S Chatti and T Tolio (International Academy for Production Engineering) (Springer) pp 390–5

[16] [16] Xu H H, Zhang X C, Xu M and Li X F 2012. Study on the control of surface roughness in single point diamond turning Proc. SPIE8416 84161D

[17] [17] Ogawa Y, Ota M, Nakamoto K, Fukaya T, Russell M, Zohdi T I, Yamazaki K and Aoyama H 2016 A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools CIRP Ann.65 245–8

[18] [18] Kumar S, Tong Z and Jiang X Q 2022 Advances in the design and manufacturing of novel freeform optics Int. J. Extreme Manuf.4 032004

[19] [19] Wang J Q, Zhang Q, Yan Y D, Liu Y and Geng Y Q 2022 Fabrication of periodic nanostructures for SERS substrates using multi-tip probe-based nanomachining approach Appl. Surf. Sci.576 151790

[20] [20] Geng Y Q, Jia J S, Li Z H, Liu Y, Wang J Q, Yan Y D and Gan Y 2021 Modeling and experimental study of machining outcomes when conducting nanoscratching using dual-tip probe on single-crystal copper Int. J. Mech. Sci.206 106649

[21] [21] Fang F Z, Wu H, Liu X D, Liu Y C and Ng S T 2003 Tool geometry study in micromachining J. Micromech. Microeng.13 726–31

[22] [22] Deng B Q, He Q X, DePaiva J M and Veldhuis S C 2022 A novel approach to cutting tool edge design based on initial wear stage J. Mater. Process. Technol.304 117561

[23] [23] Luo X C, Cheng K, Webb D and Wardle F 2005 Design of ultraprecision machine tools with applications to manufacture of miniature and micro components J. Mater. Process. Technol.167 515–28

[24] [24] Zhang Z, Liu Y, Han Q Q, Zhong S K, Wang Y and Liu H L 2024 The design and cutting performance of variable pitch solid ceramic end milling tools Int. J. Refract. Met. Hard Mater.120 106579

[25] [25] Yang Y, Yang Y, Liu H C, Wan M and Zhang W H 2024 A new cutting tool filled with metallic lattice and design method for vibration suppression in milling Mech. Syst. Signal Process.212 111310

[26] [26] Oliaei S N B, Karpat Y, Davim J P and Perveen A 2018 Micro tool design and fabrication: a review J. Manuf. Process.36 496–519

[27] [27] Reichenbach I G, Bohley M, Sousa F J P and Aurich J C 2018 Micromachining of PMMA-manufacturing of burr-free structures with single-edge ultra-small micro end mills Int. J. Adv. Manuf. Technol.96 3665–77

[28] [28] Denkena B and Biermann D 2014 Cutting edge geometries CIRP Ann.63 631–53

[29] [29] Sumiya H, Harano K and Murakami D 2012 Application of nano-polycrystalline diamond to cutting tools SEI Tech. Rev.75 18–23

[30] [30] Balasubramaniam R, Sarepaka R G V and Subbiah S 2017 Diamond Turn Machining: Theory and Practice (CRC Press) pp 47–61

[31] [31] Saptaji K 2015 Mechanical micro-machining Handbook of Manufacturing Engineering and Technology ed A Y C Nee (Springer) pp 1089–107

[32] [32] Zhou M, Zhang H J, Huang S N, Chen S J and Cheng K 2011 Experimental study on the effects of feed rate and tool geometries on tool wear in diamond cutting of sinusoidal microstructured surfaces Proc. Inst. Mech. Eng. B 225 172–83

[33] [33] Mativenga P T, Aramcharoen A and Huo D H 2013 Micro tooling design and manufacturing Micro-Cutting: Fundamentals and Applications ed K Cheng and D H Huo (Wiley) pp 45–61

[34] [34] He C L, Zong W J and Sun T 2016 Origins for the size effect of surface roughness in diamond turning Int. J. Mach. Tools Manuf.106 22–42

[35] [35] Li D, Qiao Z, Walton K, Liu Y T, Xue J D, Wang B and Jiang X Q 2018 Theoretical and experimental investigation of surface topography generation in slow tool servo ultra-precision machining of freeform surfaces Materials11 2566

[36] [36] Li P Y, Oosterling J A J, Hoogstrate A M, Langen H H and Schmidt R H M 2011 Design of micro square endmills for hard milling applications Int. J. Adv. Manuf. Technol.57 859–70

[37] [37] Lai M, Zhang X D, Fang F Z and Bi M H 2019 Effects of crystallographic orientation and negative rake angle on the brittle-ductile transition and subsurface deformation in machining of monocrystalline germanium Precis. Eng.56 164–71

[38] [38] Liu C L, Chu J N, Zhang J G, Zhang J J, Chen X, Xiao J F and Xu J F 2021 Effect of tool rake angle on the material removal mechanism transition of single-crystal silicon: a molecular dynamics study Int. J. Adv. Manuf. Technol.115 3631–44

[39] [39] Xie W K and Fang F Z 2020 Rake angle effect in cutting-based single atomic layer removal J. Manuf. Process.56 280–94

[40] [40] Gnay M, Aslan E, Korkut I and eker U 2004 Investigation of the effect of rake angle on main cutting force Int. J. Mach. Tools Manuf.44 953–9

[41] [41] Oliaei S N B and Karpat Y 2018 Polycrystalline diamond end mill cutting edge design to improve ductile-mode machining of silicon Precis. Eng.51 403–14

[42] [42] Chen N, Yuan Y, Guo C, Zhang X L, Hao X Q and He N 2020 Design, optimization and manufacturing of polycrystalline diamond micro-end-mill for micro-milling of GH4169 Diam. Relat. Mater.108 107915

[43] [43] Chen N, Li H N, Wu J M, Li Z J, Li L, Liu G Y and He N 2021 Advances in micro milling: from tool fabrication to process outcomes Int. J. Mach. Tools Manuf.160 103670

[44] [44] Oliaei S N B and Karpat Y 2016 Influence of tool wear on machining forces and tool deflections during micro milling Int. J. Adv. Manuf. Technol.84 1963–80

[45] [45] Wan Y H, Song X B, Zhao G L, Xin L J and Nian Z W 2023 Design of discrete-edge polycrystalline diamond tool and its cutting performance in milling Cf/SiC composites Diam. Relat. Mater.137 110153

[46] [46] Hser D, Thomsen-Schmidt P and Mee R 2016 Uncertainty of cutting edge roughness estimation depending on waviness filtration Proc. CIRP45 263–6

[47] [47] Kurniawan R, Kiswanto G and Ko T J 2017 Surface roughness of two-frequency elliptical vibration texturing (TFEVT) method for micro-dimple pattern process Int. J. Mach. Tools Manuf.116 77–95

[48] [48] Yan J W, Zhang Z Y, Kuriyagawa T and Gonda H 2010 Fabricating micro-structured surface by using single-crystalline diamond endmill Int. J. Adv. Manuf. Technol.51 957–64

[49] [49] Sung A N, Ratnam M M and Loh W P 2015 Effect of tool nose profile tolerance on surface roughness in finish turning Int. J. Adv. Manuf. Technol.76 2083–98

[50] [50] Sung A N, Loh W P and Ratnam M M 2016 Simulation approach for surface roughness interval prediction in finish turning Int. J. Simul. Model.15 42–55

[51] [51] He C L and Zong W J 2019 Diffraction effect and its elimination method for diamond-turned optics Opt. Express27 1326–44

[52] [52] Chen Y L, Cai Y D, Xu M L, Shimizu Y, Ito S and Gao W 2017 An edge reversal method for precision measurement of cutting edge radius of single point diamond tools Precis. Eng.50 380–7

[53] [53] Nasr M N A, Ng E G and Elbestawi M A 2007 Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L Int. J. Mach. Tools Manuf.47 401–11

[54] [54] de Oliveira F B, Rodrigues A R, Coelho R T and de Souza A F 2015 Size effect and minimum chip thickness in micromilling Int. J. Mach. Tools Manuf.89 39–54

[55] [55] Lai X M, Li H T, Li C F, Lin Z Q and Ni J 2008 Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness Int. J. Mach. Tools Manuf.48 1–14

[56] [56] Ikawa N, Shimada S, Tanaka H and Ohmori G 1991 An atomistic analysis of nanometric chip removal as affected by tool-work interaction in diamond turning CIRP Ann.40 551–4

[57] [57] Ikawa N, Shimada S and Tanaka H 1992 Minimum thickness of cut in micromachining Nanotechnology3 6–9

[58] [58] Yuan Z J, Zhou M and Dong S 1996 Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision machining J. Mater. Process. Technol.62 327–30

[59] [59] Son S M, Lim H S and Ahn J H 2005 Effects of the friction coefficient on the minimum cutting thickness in micro cutting Int. J. Mach. Tools Manuf.45 529–35

[60] [60] Liu X, DeVor R E and Kapoor S G 2006 An analytical model for the prediction of minimum chip thickness in micromachining J. Manuf. Sci. Eng.128 474–81

[61] [61] Tao L, Chen H H and Liu A J 2018 Finite element analysis of the effect of tool edge radius on residual stresses when orthogonal cutting Ti6Al4V IOP Conf. Ser.: Mater. Sci. Eng.382 042059

[62] [62] He C L, Zong W J and Zhang J J 2018 Influencing factors and theoretical modeling methods of surface roughness in turning process: state-of-the-art Int. J. Mach. Tools Manuf.129 15–26

[63] [63] Shen Q, Liu Z Q, Hua Y, Zhao J F, Lv Y and Mohsan A U H 2018 Effects of cutting edge microgeometry on residual stress in orthogonal cutting of inconel 718 by FEM Materials11 1015

[64] [64] Childs T H C, Dornfeld D, Lee D E, Min S, Sekiya K, Tezuka R and Yamane Y 2008 The influence of cutting edge sharpness on surface finish in facing with round nosed cutting tools CIRP J. Manuf. Sci. Technol.1 70–75

[65] [65] Woon K S, Rahman M, Fang F Z, Neo K S and Liu K 2008 Investigations of tool edge radius effect in micromachining: a FEM simulation approach J. Mater. Process. Technol.195 204–11

[66] [66] Rahman M A, Amrun M R, Rahman M and Kumar A S 2017 Variation of surface generation mechanisms in ultra-precision machining due to relative tool sharpness (RTS) and material properties Int. J. Mach. Tools Manuf.115 15–28

[67] [67] Yu Q, Zhou T F, He Y P, Liu P, Wang X B and Yan J W 2021 Effects of relative tool sharpness on surface generation mechanism of precision turning of electroless nickel-phosphorus coating J. Mech. Sci. Technol.35 3113–21

[68] [68] Li P and Chang Z Y 2022 Numerical modeling of the effect of cutting-edge radius on cutting force and stress concentration during machining Micromachines13 211

[69] [69] Xie W K and Fang F Z 2020 On the mechanism of dislocation-dominated chip formation in cutting-based single atomic layer removal of monocrystalline copper Int. J. Adv. Manuf. Technol.108 1587–99

[70] [70] Liu H Z and Zong W J 2022 Design criterion regarding the edge waviness and sharpness for micro diamond cutting tool J. Mater. Process. Technol.299 117300

[71] [71] Cheng X 2019 Research on Mechanism of Mechanical Lapping of Natural Diamond Tools and Key Technologies of Manufacturing Micro-Milling Tools (Harbin Institute of Technology)

[72] [72] Park E S, Je T J, Choi H J, Jeon E C and Kang M C 2012 Wear characteristics of V shape diamond tool for micro prism pattern with Al alloys Trans. Nonferr. Met. Soc. China22 s769–s774

[73] [73] Yoshino M, Nakajima S and Terano M 2015 Tool wear of a single-crystal diamond tool in nano-groove machining of a quartz glass plate Surf. Topogr. Metrol. Prop.3 044007

[74] [74] Cui Z P, Zhang C Y, Zhang H J, Li G, Wu L Q, Zong W J and Du K 2022 Wear characteristics of the pointed diamond tool in ultraprecision and micro cutting of Al 6061 V-grooves J. Mater. Process. Technol.300 117414

[75] [75] Zhang G Q and To S 2015 A novel surface quality evaluation method in ultra-precision raster milling using cutting chips J. Mater. Process. Technol.219 328–38

[76] [76] Zareena A R and Veldhuis S C 2012 Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium J. Mater. Process. Technol.212 560–70

[77] [77] Mir A, Luo X C and Sun J N 2016 The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of silicon Wear364–365 233–43

[78] [78] Mukaida M and Yan J W 2017 Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo Int. J. Mach. Tools Manuf.115 2–14

[79] [79] Wu D X, Wang B and Fang F Z 2019 Effects of tool wear on surface micro-topography in ultra-precision turning Int. J. Adv. Manuf. Technol.102 4397–407

[80] [80] Sharma A, Joshi S S, Datta D and Balasubramaniam R 2020 Modeling and analysis of tool wear mechanisms in diamond turning of copper beryllium alloy J. Manuf. Process.56 439–50

[81] [81] Lane B M, Shi M, Dow T A and Scattergood R 2010 Diamond tool wear when machining Al6061 and 1215 steel Wear268 1434–41

[82] [82] Ge Y F, Xu J H and Yang H 2010 Diamond tools wear and their applicability when ultra-precision turning of SiCp/2009Al matrix composite Wear269 699–708

[83] [83] Zhang Z Y, Yan J W and Kuriyagawa T 2011 Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide Int. J. Adv. Manuf. Technol.57 117–25

[84] [84] Yan J W, Syoji K and Tamaki J 2003 Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon Wear255 1380–7

[85] [85] Chon K S, Takahashi H and Namba Y 2014 Wear inspection of a single-crystal diamond tool used in electroless nickel turning Opt. Eng.53 034102

[86] [86] Goel S, Luo X C and Reuben R L 2013 Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process Tribol. Int.57 272–81

[87] [87] Yang N, Yang X, Huang W, Zhao S and Lei D J 2022 Analysis of diamond tool wear mechanism in terms of stress for KDP fly cutting Mater. Today Commun.30 103146

[88] [88] Guo J, Zhang J G, Pan Y A, Kang R K, Yoshiharu N, Paul S, Yue X B, Wang B R and Guo D M 2020 A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals Int. J. Extreme Manuf.2 012001

[89] [89] Zou L, Yin J C, Huang Y and Zhou M 2018 Essential causes for tool wear of single crystal diamond in ultra-precision cutting of ferrous metals Diam. Relat. Mater.86 29–40

[90] [90] Shimada S, Tanaka H, Higuchi M, Yamaguchi T, Honda S and Obata K 2004 Thermo-chemical wear mechanism of diamond tool in machining of ferrous metals CIRP Ann.53 57–60

[91] [91] Hong D, Zeng W, Yang N, Tang B and Liu Q J 2020 The micro-wear mechanism of diamond during diamond tool fly-cutting KDP (KH2PO4) from first principle calculations J. Mol. Model.26 284

[92] [92] Uddin M S, Seah K H W, Rahman M, Li X P and Liu K 2007 Performance of single crystal diamond tools in ductile mode cutting of silicon J. Mater. Process. Technol.185 24–30

[93] [93] Brinksmeier E, Glbe R and Osmer J 2006 Ultra-precision diamond cutting of steel molds CIRP Ann.55 551–4

[94] [94] Song Y C, Nezu K, Park C H and Moriwaki T 2009 Tool wear control in single-crystal diamond cutting of steel by using the ultra-intermittent cutting method Int. J. Mach. Tools Manuf.49 339–43

[95] [95] Brinksmeier E, Preuss W, Riemer O and Rentsch R 2017 Cutting forces, tool wear and surface finish in high speed diamond machining Precis. Eng.49 293–304

[96] [96] Durazo-Cardenas I, Shore P, Luo X, Jacklin T, Impey S A and Cox A 2007 3D characterisation of tool wear whilst diamond turning silicon Wear262 340–9

[97] [97] Zhuang G L, Zong W J and Tang Y F 2022 Wear of micro diamond tool in ultra-precision turning under dry and minimum quantity lubrication conditions Int. J. Adv. Manuf. Technol.121 7891–905

[98] [98] Evans C and Bryan J B 1991 Cryogenic diamond turning of stainless steel CIRP Ann.40 571–5

[99] [99] Brinksmeier E and Glbe R 2001 Advances in precision machining of steel CIRP Ann.50 385–8

[100] [100] Shimada S, Inamura T, Higuchi M, Tanaka H and Ikawa N 2000 Suppression of tool wear in diamond turning of copper under reduced oxygen atmosphere CIRP Ann.49 21–24

[101] [101] Zou L, Huang Y, Zhou M and Duan L 2017 Investigation on diamond tool wear in ultrasonic vibration-assisted turning die steels Mater. Manuf. Process.32 1505–11

[102] [102] Nath C, Rahman M and Neo K S 2009 Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting Int. J. Mach. Tools Manuf.49 1089–95

[103] [103] Nath C, Rahman M and Neo K S 2009 A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide J. Mater. Process. Technol.209 5830–6

[104] [104] Zhang J G, Suzuki N, Wang Y L and Shamoto E 2014 Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond J. Mater. Process. Technol.214 2644–59

[105] [105] Wang J S, Fang F Z, Zhang X D and De Simone D 2021 Investigation on controlling diamond tool edge and wear by ultrasonic vibration Appl. Acoust.176 107896

[106] [106] Shahinian H, Navare J, Zaytsev D and Ravindra D 2019 Microlaser assisted diamond turning of precision silicon optics Opt. Eng.58 092607

[107] [107] Yip W S and To S 2017 Tool life enhancement in dry diamond turning of titanium alloys using an eddy current damping and a magnetic field for sustainable manufacturing J. Clean. Prod.168 929–39

[108] [108] Zhang G 2007 Method for extending diamond tool life in diamond machining of materials that chemically react with diamond US Patent No. 7,198,043

[109] [109] Zhang X Q, Huang R, Liu K, Kumar A S and Deng H 2018 Suppression of diamond tool wear in machining of tungsten carbide by combining ultrasonic vibration and electrochemical processing Ceram. Int.44 4142–53

[110] [110] Wang Y L, Suzuki N, Shamoto E and Zhao Q L 2011 Investigation of tool wear suppression in ultraprecision diamond machining of die steel Precis. Eng.35 677–85

[111] [111] Kawasegi N, Ozaki K, Morita N, Nishimura K and Yamaguchi M 2017 Development and machining performance of a textured diamond cutting tool fabricated with a focused ion beam and heat treatment Precis. Eng.47 311–20

[112] [112] Wang Q W, Yang Y, Yao P, Zhang Z Y, Yu S M, Zhu H T and Huang C Z 2021 Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser Tribol. Int.154 106720

[113] [113] Zong W J, Zhang J J, Liu Y and Sun T 2014 Achieving ultra-hard surface of mechanically polished diamond crystal by thermo-chemical refinement Appl. Surf. Sci.316 617–24

[114] [114] Lee Y J, Hao L, Lder J, Chaudhari A, Wang S Y, Manzhos S and Wang H 2019 Micromachining of ferrous metal with an ion implanted diamond cutting tool Carbon152 598–608

[115] [115] Du J B, Liu H Z, Yang N, Chen X Z and Zong W J 2023 Modification of diamond tool by focused ion beam in dry single-point diamond turning Appl. Surf. Sci.637 157882

[116] [116] Du J B, Liu H Z and Zong W J 2023 Cutting performance assessment on the modified single crystal diamond tool by focused ion beam Diam. Relat. Mater.139 110354

[117] [117] Chen N, Zhao J Y, Wang R K, Yan B, Wu Y, Li L, Yu N and He N 2024 Inhibition effect of covalent carbon nanosheets on mechanochemical wear of diamond Mater. Des.237 112573

[118] [118] Yan B et al 2023 Instantaneous formation of covalently bonded diamond–graphite–graphene with synergistic properties Int. J. Mach. Tools Manuf.193 104087

[119] [119] Chen N, Liu J W, He N, Xiao X Z, Zhao J Y, Jia Y B and Yu N 2024 Fabrication of high aspect ratio grooves on aluminium nitride by laser and chemical milling enhanced micro milling J. Mater. Process. Technol.325 118299

[120] [120] Cheng X and Zong W J 2018 Anisotropic evolution of damaged carbons of a mechanically polished diamond surface in low-temperature annealing Diam. Relat. Mater.90 7–17

[121] [121] Zhuang G L, Zong W J, Tang Y F and Cui Z P 2022 Crystal orientation and material type related suppression to the graphitization wear of micro diamond tool Diam. Relat. Mater.127 109182

[122] [122] Yuan S, Guo X G, Jin Z J, Kang R K and Guo D M 2020 Research status on chemical mechanical polishing of diamond Surf. Technol.49 11–22

[123] [123] Yamamura K, Emori K, Sun R, Ohkubo Y, Endo K, Yamada H, Chayahara A and Mokuno Y 2018 Damage-free highly efficient polishing of single-crystal diamond wafer by plasma-assisted polishing CIRP Ann.67 353–6

[124] [124] Kubota A and Takita T 2018 Novel planarization method of single-crystal diamond using 172 nm vacuum-ultraviolet light Precis. Eng.54 269–75

[125] [125] Yuan Z J, He J C and Yao Y X 1992 The optimum crystal plane of natural diamond tool for precision machining CIRP Ann.41 605–8

[126] [126] Cheng K, Luo X, Ward R and Holt R 2003 Modeling and simulation of the tool wear in nanometric cutting Wear255 1427–32

[127] [127] Goel S, Luo X C, Reuben R L and Pen H M 2012 Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon Wear284–285 65–72

[128] [128] Uddin M S, Seah K H W, Li X P, Rahman M and Liu K 2004 Effect of crystallographic orientation on wear of diamond tools for nano-scale ductile cutting of silicon Wear257 751–9

[129] [129] Pramanik A, Neo K S, Rahman M, Li X P, Sawa M and Maeda Y 2009 Ultraprecision turning of electroless nickel: effects of crystal orientation and origin of diamond tools Int. J. Adv. Manuf. Technol.43 681–9

[130] [130] Zong W J, Li Z Q, Sun T, Li D and Cheng K 2010 Analysis for the wear resistance anisotropy of diamond cutting tools in theory and experiment J. Mater. Process. Technol.210 858–67

[131] [131] Navare J, Bodlapati C, Turnbull R, Zhong Y X and Shahinian H 2021 Experimental investigation on the effect of diamond type on the performance of single-point diamond turning (SPDT) of silicon Proc. SPIE11889 1188917

[132] [132] Navare J, Kang D, Zaytsev D, Bodlapati C, Ravindra D and Shahinian H 2020 Experimental investigation on the effect of crystal orientation of diamond tooling on micro laser assisted diamond turning of zinc sulfide Proc. Manuf.48 606–10

[133] [133] Liu H Z, Zong W J and Cui Z P 2022 Durability of micro diamond tools with different crystallographic planes J. Mater. Process. Technol.305 117600

[134] [134] Grillo S E and Field J E 1997 The polishing of diamond J. Phys. D: Appl. Phys.30 202–9

[135] [135] Thomas E L H, Nelson G W, Mandal S, Foord J S and Williams O A 2014 Chemical mechanical polishing of thin film diamond Carbon68 473–9

[136] [136] Furushiro N, Higuchi M, Yamaguchi T, Shimada S and Obata K 2009 Polishing of single point diamond tool based on thermo-chemical reaction with copper Precis. Eng.33 486–91

[137] [137] Butler-Smith P W, Axinte D A, Pacella M and Fay M W 2013 Micro/nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures J. Mater. Process. Technol.213 194–200

[138] [138] Crawford K G, Tallaire A, Li X, Macdonald D A, Qi D C and Moran D A J 2018 The role of hydrogen plasma power on surface roughness and carrier transport in transfer-doped H-diamond Diam. Relat. Mater.84 48–54

[139] [139] Nagase T, Kato H, Pahlovy S A and Miyamoto I 2010 Surface morphology analysis of natural single crystal diamond chips bombarded with Ar+ ion beam Vacuum84 1423–6

[140] [140] de Theije F K, Roy O, van der Laag N J and van Enckevort W J P 2000 Oxidative etching of diamond Diam. Relat. Mater.9 929–34

[141] [141] Luo H, Ajmal K M, Liu W, Yamamura K and Deng H 2021 Polishing and planarization of single crystal diamonds: state-of-the-art and perspectives Int. J. Extreme Manuf.3 022003

[142] [142] Zhou T F, He Y P, Yu Q, Liang Z Q, Li S D, Liu X H, Dong X B and Wang X B 2020 Study on electroless composite plating for an Ni-P bond micro diamond wheel J. Mater. Process. Technol.279 116561

[143] [143] Zhang X, Sun H F, Mao B, Dai R, Zhuang H L, Liao Y L and Nian Q 2022 Nanosecond laser shock detonation of nanodiamonds: from laser-matter interaction to graphite-to-diamond phase transition Int. J. Extreme Manuf.4 015402

[144] [144] Suzuki H, Okada M, Fujii K, Matsui S and Yamagata Y 2013 Development of micro milling tool made of single crystalline diamond for ceramic cutting CIRP Ann.62 59–62

[145] [145] Xia Y, He N, Li L and Zhao G L 2021 Experimental study on fabrication of CVD diamond micro milling tool by picosecond pulsed laser Micromachines12 1058

[146] [146] Dold C, Henerichs M, Gilgen P and Wegener K 2013 Laser processing of coarse grain polycrystalline diamond (PCD) cutting tool inserts using picosecond laser pulses Phys. Proc.41 610–6

[147] [147] Zhao Y, Liu H G, Yu T B and Hong M H 2021 Fabrication of high hardness microarray diamond tools by femtosecond laser ablation Opt. Laser Technol.140 107014

[148] [148] Takayama N, Ishizuka J and Yan J W 2018 Microgrooving of a single-crystal diamond tool using a picosecond pulsed laser and some cutting tests Precis. Eng.53 252–62

[149] [149] Picard Y N, Adams D P, Vasile M J and Ritchey M B 2003 Focused ion beam-shaped microtools for ultra-precision machining of cylindrical components Precis. Eng.27 59–69

[150] [150] Ding X, Lim G C, Cheng C K, Butler D L, Shaw K C, Liu K and Fong W S 2008 Fabrication of a micro-size diamond tool using a focused ion beam J. Micromech. Microeng.18 075017

[151] [151] Xu Z W, Fang F Z, Zhang S J, Zhang X D, Hu X T, Fu Y Q and Li L 2010 Fabrication of micro DOE using micro tools shaped with focused ion beam Opt. Express18 8025–32

[152] [152] Sun J, Luo X, Chang W, Ritchie J M, Chien J and Lee A 2012 Fabrication of periodic nanostructures by single-point diamond turning with focused ion beam built tool tips J. Micromech. Microeng.22 115014

[153] [153] Venkatesh V C and Izman S 2008 Precision Engineering (McGraw-Hill Professional Publishing) pp 142–86

[154] [154] Zhang X Q, Woon K S and Rahman M 2014 Diamond turning Compr. Mater. Process.11 201–20

[155] [155] Lucca D A, Klopfstein M J and Riemer O 2020 Ultra-precision machining: cutting with diamond tools J. Manuf. Sci. Eng.142 110817

[156] [156] Uegami K, Tamamura K and Jang K K 1988 Lapping and frictional properties of diamond, and characteristics of diamond cutting tool J. Mech. Work. Technol.17 147–55

[157] [157] Zong W J, Li D, Wang H X, Sun T and Cheng K 2003 On development of diamond tool technology China Mech. Eng.14 1165–9

[158] [158] Yuan Z J, Yao Y X, Zhou M and Bal Q S 2003 Lapping of single crystal diamond tools CIRP Ann.52 285–8

[159] [159] Zhang J M 1999 Grinding technology for single-crystal diamond cutters Tool Eng.33 14–16

[160] [160] Li Z Q, Xia G L, Zong W J, Sun T and Dong S 2004 Key technique of grinding circular arc diamond cutting tool Tool Eng.38 105–7

[161] [161] Zong W J, Sun T, Li D, Cheng K and Dong S 2005 Mechanical lapping single crystal diamond J. Harbin Inst. Technol.37 1036–8 1045

[162] [162] He C L, Yan J W, Wang S Q, Zhang S, Chen G and Ren C Z 2023 A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials Int. J. Extreme Manuf.5 035102

[163] [163] Yasuo T 2008 Lapping of diamond turning tool with 50 nm profile accuracy Superhard Mater. Eng.20 54–55

[164] [164] Zhang J M, Deng W P and Luo N W 2001 A simple and reliable method for tool grinding main shaft with crude diamond tool Mech. Eng.1 23–24

[165] [165] Parandoush P and Hossain A 2014 A review of modeling and simulation of laser beam machining Int. J. Mach. Tools Manuf.85 135–45

[166] [166] Ebenezer G, Khan M A and Jappes J T W 2022 Influence of short-pulsed laser and its thermal effect on micromachining of NiTi alloy Sdhan47 201

[167] [167] Khan M A and Gupta K 2019 Experimental evaluation of surface quality characteristics in laser machining of nickel-based superalloy Optik196 163199

[168] [168] Khan M A and Gupta K 2020 A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools Mater. Res. Express7 016537

[169] [169] Zhao G L, Li Z Y, Hu M S, Li L, He N and Jamil M 2019 Fabrication and performance of CVD diamond cutting tool in micro milling of oxygen-free copper Diam. Relat. Mater.100 107589

[170] [170] Chen J Y, Jin T Y and Tian Y J 2016 Development of an ultrahard nanotwinned cBN micro tool for cutting hardened steel Sci. China Technol. Sci.59 876–81

[171] [171] Jin T Y, Chen J Y, Zhao T, Zhao Q L and Tian Y J 2021 Nanotwinned diamond cutting tool processed by femtosecond pulsed laser milling with trochoidal trajectory J. Mater. Process. Technol.294 117115

[172] [172] Wu Y, He N, Chen N, Polte J, Yan B, Li L and Uhlmann E 2022 Sharpening mechanism of extremely sharp edges for diamond micro mills Int. J. Mech. Sci.231 107584

[173] [173] Zhang Z, Zhang Q L, Wang Q W, Su H H, Fu Y C and Xu J H 2020 Investigation on the material removal behavior of single crystal diamond by infrared nanosecond pulsed laser ablation Opt. Laser Technol.126 106086

[174] [174] Okamoto Y, Okubo T, Kajitani A and Okada A 2022 High-quality micro-shape fabrication of monocrystalline diamond by nanosecond pulsed laser and acid cleaning Int. J. Extreme Manuf.4 025301

[175] [175] Doualle T, Reymond M, Pontillon Y and Gallais L 2021 Laser ablation of graphite with near infrared microsecond pulses Appl. Phys. A 127 722

[176] [176] Apostolova T, Kurylo V and Gnilitskyi I 2021 Ultrafast laser processing of diamond materials: a review Front. Phys.9 650280

[177] [177] Wu W, Li W L, Fang F Z and Xu Z W 2013 Microtool fabrication by focused ion beam technology Handbook of Manufacturing Engineering and Technology ed A Nee (Springer) pp 1473–510

[178] [178] Vasile M J, Friedrich C R, Kikkeri B and McElhannon R 1996 Micrometer-scale machining: tool fabrication and initial results Precis. Eng.19 180–6

[179] [179] Adams D P, Vasile M J and Krishnan A S M 2000 Microgrooving and microthreading tools for fabricating curvilinear features Precis. Eng.24 347–56

[180] [180] Butler-Smith P W, Axinte D A and Daine M 2012 Solid diamond micro-grinding tools: from innovative design and fabrication to preliminary performance evaluation in Ti–6Al–4V Int. J. Mach. Tools Manuf.59 55–64

[181] [181] Fang F Z and Xu Z W 2013 State-of-the-art for nanomanufacturing using ion-beam technology Handbook of Manufacturing Engineering and Technology ed A Nee (Springer) pp 1–31

[182] [182] Stpie P 2010 Micro-geometrical characteristics of the cutting edge as the intersection of two rough surfaces Wear269 249–61

[183] [183] Tong Z and Luo X C 2015 Investigation of focused ion beam induced damage in single crystal diamond tools Appl. Surf. Sci.347 727–35

[184] [184] Kawasegi N, Ozaki K, Morita N, Nishimura K and Sasaoka H 2014 Single-crystal diamond tools formed using a focused ion beam: tool life enhancement via heat treatment Diam. Relat. Mater.49 14–18

[185] [185] Tolkowsky M 1920 Research on the Abrading, Grinding or Polishing of Diamonds (University of London)

[186] [186] Wilks J 1980 Performance of diamonds as cutting tools for precision machining Precis. Eng.2 57–72

[187] [187] Liu H Z, Zong W J and Cheng X 2021 Behaviors of carbon atoms induced by friction in mechanical polishing of diamond Comput. Mater. Sci.186 110069

[188] [188] van Bouwelen F M 2000 Diamond polishing from different angles Diam. Relat. Mater.9 925–8

[189] [189] Zhang M D and Xu H Q 2021 Controllability and mechanism investigation on the subsurface damage of CVD diamond film by Fe-containing vitrified bond wheel Tribol. Int.155 106774

[190] [190] Xie Y S and Bhushan B 1996 Effects of particle size, polishing pad and contact pressure in free abrasive polishing Wear200 281–95

[191] [191] Huang W H and Yan J W 2023 Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review Int. J. Extreme Manuf.5 012003

[192] [192] Grillo S E, Field J E and van Bouwelen F M 2000 Diamond polishing: the dependency of friction and wear on load and crystal orientation J. Phys. D: Appl. Phys.33 985–90

[193] [193] Yan J W, Oowada T, Zhou T F and Kuriyagawa T 2009 Precision machining of microstructures on electroless-plated NiP surface for molding glass components J. Mater. Process. Technol.209 4802–8

[194] [194] Liu Z P, Dong L H, Han Y S and Song J 2001 Studying of lapping technology for ultra-precision diamond cutting tool J. Synth. Cryst.30 413–8

[195] [195] Li Z and Ma Y 2003 The machining of single crystal diamond tool Coal Mine Mach.24 50–51

[196] [196] Wang C Y, Chen J, Chen C L and Guo Z N 2001 Research on the polishing of single crystal diamond Diam. Abras. Eng.5 17–20

[197] [197] Qiu Z J, Fang F Z, Ding L Y and Zhao Q Z 2011 Investigation of diamond cutting tool lapping system based on on-machine image measurement Int. J. Adv. Manuf. Technol.56 79–86

[198] [198] Lei D J, Xia Z H and He J G 2011 Key technology research of lapping high-precision diamond cutting tool Manuf. Technol. Mach. Tool11 139–41

[199] [199] Huang S T, Zhou L, Xu L F and Jiao K R 2010 A super-high speed polishing technique for CVD diamond films Diam. Relat. Mater.19 1316–23

[200] [200] Lu J, Xiao P, Tong R L, Luo Q F and Xu X P 2019 Precision polishing of single crystal diamond (111) substrates using a Sol-Gel (SG) polishing pad IEEE Trans. Semicond. Manuf.32 341–5

[201] [201] Lin Y C, Lu J, Tong R L, Luo Q F and Xu X P 2018 Surface damage of single-crystal diamond (100) processed based on a sol-gel polishing tool Diam. Relat. Mater.83 46–53

[202] [202] Zheng Y T et al 2020 Subsurface cleavage of diamond after high-speed three-dimensional dynamic friction polishing Diam. Relat. Mater.101 107600

[203] [203] Zong W J, Sun T, Li D, Cheng K and Li Z Q 2008 Nano-precision diamond cutting tools achieved by mechanical lapping versus thermo-mechanical lapping Diam. Relat. Mater.17 954–61

[204] [204] Sato Y and Yan J W 2022 Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo Int. J. Extreme Manuf.4 025102

[205] [205] Zong W J, Cheng K, Li D, Sun T and Liang Y C 2007 The ultimate sharpness of single-crystal diamond cutting tools—part I: theoretical analyses and predictions Int. J. Mach. Tools Manuf.47 852–63

[206] [206] Zong W J, Li D, Sun T, Cheng K and Liang Y C 2007 The ultimate sharpness of single-crystal diamond cutting tools—part II: a novel efficient lapping process Int. J. Mach. Tools Manuf.47 864–71

[207] [207] Zong W J, Wu D and Li Z Q 2016 Strength dependent design method for the crystal orientation of diamond Berkovich indenter Mater. Des.89 1057–70

[208] [208] Wei Z L 2017 Manufacturing and Measuring Techniques of High-Accuracy Diamond Vickers Indenter (Harbin Institute of Technology)

[209] [209] Geng Y Q, Wang J Q, Yan Y D and Cai J X 2023 Fabrication of nanoindentation array-based SERS substrate using Conical and Berkovich indenters Proc. Inst. Mech. Eng. C 237 4713–25

[210] [210] Wang J Q, Yan Y D, Li C and Geng Y Q 2023 Material removal mechanism and subsurface characteristics of silicon 3D nanomilling Int. J. Mech. Sci.242 108020

[211] [211] Zhang J R, Lu S W, Shi G F, Xie W K, Geng Y Q and Wang Z B 2023 A study on a hybrid SERS substrates based on arrayed gold nanoparticle/graphene/copper cone cavities fabricated by a conical tip indentation J. Mater. Res. Technol.22 1558–71

[212] [212] Wu L Q, Zhang H J, Zong W J and Du K 2022 A theoretical model to predict the anisotropic characteristics in grinding of diamond conical indenter J. Mater. Process. Technol.302 117511

[213] [213] Zong W J, Wu D and He C L 2017 Radius and angle determination of diamond Berkovich indenter Measurement104 243–52

[214] [214] Zylstra A B et al 2022 Burning plasma achieved in inertial fusion Nature601 542–8

[215] [215] Hao X Q, Chen M Y, Liu L H, Han J J, He N, Zhao G L and Chen N 2020 Fabrication of large aspect ratio PCD micro-milling tool with pulsed lasers and grinding J. Manuf. Process.58 489–99

[216] [216] Wu X, Li L and He N 2017 Investigation on the burr formation mechanism in micro cutting Precis. Eng.47 191–6

[217] [217] Yan Y D, Wang Y Z, Wu W, Lou Z Z and Geng Y Q 2023 Fabrication of sinusoidal-shaped multi-tip diamond tools by a focused ion beam machining process Proc. Inst. Mech. Eng. B 237 1115–21

[218] [218] Wang Y Z, Fan P F, Luo X C, Geng Y Q, Goel S, Wu W, Li G and Yan Y D 2021 Fabrication of three-dimensional sin-shaped ripples using a multi-tip diamond tool based on the force modulation approach J. Manuf. Process.72 262–73