[1] Boué C, Holé S. Comparison between multi-frequency and multi-speed laser lock-in thermography methods for the evaluation of crack depths in metal[J]. Quantitative InfraRed Thermography Journal, 17, 223-234(2020).

[2] Xiang M, Dong L H, Wang H D et al. Research progress on ultrasonic infrared thermography nondestructive testing of fatigue cracks in metal[J]. Laser & Infrared, 48, 667-674(2018).

[3] Xu Y, Wang Q Y, Luo C C et al. Chip crack imaging detection based on line laser phase-locked thermal imaging[J]. Laser & Optoelectronics Progress, 57, 061018(2020).

[4] Yang L J, Li Y, Sun J J et al. Reflection and transmission of laser ultrasonic waves on surface defects[J]. Laser & Optoelectronics Progress, 56, 041203(2019).

[5] Ospennikova O G, Kudinov I I, Golovkov A N et al. Research of defectoscopic properties of powder compositions for increasing efficiency and reliability of penetrant testing of complex shaped parts[J]. Russian Journal of Nondestructive Testing, 56, 291-297(2020).

[6] Gu Y H, Zhang Z Z, Gao X H et al. Application of nondestructive detection of aluminum using laser ultrasonic technology and EMAT method[J]. Chinese Journal of Lasers, 47, 0504002(2020).

[7] Liu J Q, Zhang Z J, Lin Z Y et al. Depth detection of material surface defects based on laser thermography[J]. Laser & Optoelectronics Progress, 58, 0411002(2021).

[8] Wang B Z, Dong L H, Wang H D et al. Research and application of laser infrared thermography in material defect detection[J]. Materials Reports, 34, 5127-5132(2020).

[9] Grice K R, Inglehart L J, Favro L D et al. Thermal wave imaging of closed cracks in opaque solids[J]. Journal of Applied Physics, 54, 6245-6255(1983).

[10] González J, Mendioroz A, Sommier A et al. Fast sizing of the width of infinite vertical cracks using constant velocity flying-spot thermography[J]. NDT & E International, 103, 166-172(2019).

[11] Myrach P, Ziegler M, Maierhofer C et al. Influence of the acquisition parameters on the performance of laser-thermography for crack detection in metallic components[C], 1581, 1624-1630(2014).

[12] Qiu J X, Pei C X, Liu H C et al. Quantitative evaluation of surface crack depth with laser spot thermography[J]. International Journal of Fatigue, 101, 80-85(2017).

[13] Salazar A, Mendioroz A, Oleaga A. Flying spot thermography: quantitative assessment of thermal diffusivity and crack width[J]. Journal of Applied Physics, 127, 131101(2020).

[14] Boué C, Holé S. Open crack depth sizing by multi-speed continuous laser stimulated lock-in thermography[J]. Measurement Science and Technology, 28, 065901(2017).

[15] Yang Z W, Xie X Y, Li Y et al. Influence analysis of key parameters in laser scanning thermography nondestructive testing[J]. Infrared and Laser Engineering, 48, 1105008(2019).

[16] Zhang J P, Qin X P, Yuan J X et al. Defect location and size detection based on laser ultrasonic diffraction bulk wave[J]. Acta Optica Sinica, 40, 1214002(2020).

[17] Jin G F, Zhang W, Shi J et al. Numerical analysis of influencing factors and capability for thermal wave NDT in liquid propellant tank corrosion damage detection[J]. Measurement Science Review, 13, 214-222(2013).

[18] Huang Y, Zhang Y, Liu G et al. Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression[J]. Ocean Engineering, 37, 1503-1512(2010).

[21] Wang L, Li X Q, Deng L F et al. Research on the necessity of using contrast enhancer[J]. China Petroleum and Chemical Standard and Quality, 38, 109-110(2018).

[22] Zhang C J. Effect of ingot composition on phase transformation point and forging microstructure of TC4 titanium alloy[J]. Hot Working Technology, 46, 152-154(2017).