Mechanical pressing method for making high-quality perovskite single crystals

Chenglin Wang; Jie Sun; Jiangzhao Chen; Cong Chen; Liming Ding

doi:10.1088/1674-4926/44/11/110201

Journal of Semiconductors, Volume. 44, Issue 11, 110201(2023)

Mechanical pressing method for making high-quality perovskite single crystals

Chenglin Wang¹, Jie Sun³, Jiangzhao Chen^2、*, Cong Chen^1,4、**, and Liming Ding^3、***

¹State Key Laboratory of Reliability and Intelligence of Electrical Equipment, School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China

²Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China

³Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China

⁴Macao Institute of Materials Science and Engineering (MIMSE), Macau University of Science and Technology, Macau 999078, China

show less

References(31)

[1] L H Zhu, X Zhang, M J Li et al. Trap state passivation by rational ligand molecule engineering toward efficient and stable perovskite solar cells exceeding 23% efficiency. Adv Energy Mater, 11, 2100529(2021).

[2] D Y Gao, R Li, X H Chen et al. Managing interfacial defects and carriers by synergistic modulation of functional groups and spatial conformation for high-performance perovskite photovoltaics based on vacuum flash method. Adv Mater, 35, 2301028(2023).

[3] Y Zhao, F Ma, Z H Qu et al. Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells. Science, 377, 531(2022).

[4] J Park, J Kim, H S Yun et al. Controlled growth of perovskite layers with volatile alkylammonium chlorides. Nature, 616, 724(2023).

[5] H R Wu, Z S Su, F M Jin et al. Improved performance of perovskite photodetectors based on a solution-processed CH3NH3PbI3/SnO2 heterojunction. Org Electron, 57, 206(2018).

[6] W J Yin, T T Shi, Y F Yan. Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber. Appl Phys Lett, 104, 063903(2014).

[7] L K Ono, S Z Liu, Y B Qi. Reducing detrimental defects for high-performance metal halide perovskite solar cells. Angew Chem Int Ed, 59, 6676(2020).

[8] C X Bao, Z L Chen, Y J Fang et al. Low-noise and large-linear-dynamic-range photodetectors based on hybrid-perovskite thin-single-crystals. Adv Mater, 29, 1703209(2017).

[9] Y X Zhang, Y C Liu, Z Yang et al. High-quality perovskite MAPbI3 single crystals for broad-spectrum and rapid response integrate photodetector. J Energy Chem, 27, 722(2018).

[10] J Ding, H J Fang, Z P Lian et al. A self-powered photodetector based on a CH3NH3PbI3 single crystal with asymmetric electrodes. Cryst Eng Comm, 18, 4405(2016).

[11] J Yu, J Zheng, H Y Chen et al. Near-infrared photodetectors based on CH3NH3PbI3 perovskite single crystals for bioimaging applications. J Mater Chem C, 10, 274(2022).

[12] N Leupold, F Panzer. Recent advances and perspectives on powder-based halide perovskite film processing. Adv Funct Mater, 31, 2007350(2021).

[13] S Shrestha, R Fischer, G J Matt et al. High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. Nat Photonics, 11, 436(2017).

[14] B Yang, W C Pan, H D Wu et al. Heteroepitaxial passivation of Cs2AgBiBr6 wafers with suppressed ionic migration for X-ray imaging. Nat Commun, 10, 1989(2019).

[15] C Witt, A Schmid, N Leupold et al. Impact of pressure and temperature on the compaction dynamics and layer properties of powder-pressed methylammonium lead halide thick films. ACS Appl Electron Mater, 2, 2619(2020).

[16] L Y Zheng, A Nozariasbmarz, Y C Hou et al. A universal all-solid synthesis for high throughput production of halide perovskite. Nat Commun, 13, 7399(2022).

[17] M Bonn, K Miyata, E Hendry et al. Role of dielectric drag in polaron mobility in lead halide perovskites. ACS Energy Lett, 2, 2555(2017).

[18] W Skrotzki, O Frommeyer, P Haasen. Plasticity of polycrystalline ionic solids. Phys Status Solidi A, 66, 219(1981).

[19] M X Hu, S S Jia, Y C Liu et al. Large and dense organic–inorganic hybrid perovskite CH3NH3PbI3 wafer fabricated by one-step reactive direct wafer production with high X-ray sensitivity. ACS Appl Mater Interfaces, 12, 16592(2020).

[20] J Yu, Y M Qu, Y F Deng et al. Hot-pressed CH3NH3PbI3 polycrystalline wafers for near-infrared bioimaging and medical X-ray imaging. J Mater Chem C, 11, 5815(2023).

[21] H Jing, R W Peng, R M Ma et al. Flexible ultrathin single-crystalline perovskite photodetector. Nano Lett, 20, 7144(2020).

[22] J Sun, L M Ding. Linearly polarization-sensitive perovskite photodetectors. Nano-Micro Lett, 15, 90(2023).

[23] Y H Cheng, L M Ding. Pushing commercialization of perovskite solar cells by improving their intrinsic stability. Energy Environ Sci, 14, 3233(2021).

[24] Q Jiang, Y Zhao, X W Zhang et al. Surface passivation of perovskite film for efficient solar cells. Nat Photonics, 13, 460(2019).

[25] X X Liu, Z G Yu, T A Wang et al. Full defects passivation enables 21% efficiency perovskite solar cells operating in air. Adv Energy Mater, 10, 2001958(2020).

[26] D Y Gao, L Q Yang, X H Ma et al. Passivating buried interface with multifunctional novel ionic liquid containing simultaneously fluorinated anion and cation yielding stable perovskite solar cells over 23% efficiency. J Energy Chem, 69, 659(2022).

[27] C T Zuo, L M Ding. Modified PEDOT layer makes a 1.52 V Voc for perovskite/PCBM solar cells. Adv Energy Mater, 7, 1601193(2017).

[28] C T Zuo, L M Ding. Drop-casting to make efficient perovskite solar cells under high humidity. Angew Chem Int Ed, 133, 11342(2021).

[29] B Liu, J S Wang, Y Liu et al. Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion. Intermetallics, 75, 25(2016).

[30] K Ibrahim, A Shahin, A Jones et al. Humidity-resistant perovskite solar cells via the incorporation of halogenated graphene particles. Sol Energy, 224, 787(2021).

[31] X T Li, J M Hoffman, M G Kanatzidis. The 2D halide perovskite rulebook: How the spacer influences everything from the structure to optoelectronic device efficiency. Chem Rev, 121, 2230(2021).

Tools

Get Citation

Copy Citation Text

Chenglin Wang, Jie Sun, Jiangzhao Chen, Cong Chen, Liming Ding. Mechanical pressing method for making high-quality perovskite single crystals[J]. Journal of Semiconductors, 2023, 44(11): 110201

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Articles

Received: Sep. 25, 2023

Accepted: --

Published Online: Jan. 3, 2024

The Author Email: Chen Jiangzhao (JZChen), Chen Cong (CChen), Ding Liming (LMDing)

DOI:10.1088/1674-4926/44/11/110201

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology