[1] [1] Baselt R 2014 Encyclopedia of toxicology J. Anal. Toxicol. 38 464

[2] [2] Young R J and Lovell P A 2011 Introduction to Polymers 3rd edn (New York: CRC Press)

[3] [3] Chung H and Das S 2006 Processing and properties of glass bead particulate-filled functionally graded nylon-11 composites produced by selective laser sintering Mater. Sci. Eng. A 437 226-34

[5] [5] Wang X, Jiang M, Zhou Z W, Gou J H and Hui D 2017 3D printing of polymer matrix composites: a review and prospective Composites B 110 442-58

[6] [6] Kruth J-P, Leu M C and Nakagawa T 1998 Progress in additive manufacturing and rapid prototyping CIRP Ann. 47 525-40

[7] [7] Levy G N, Schindel R and Kruth J P 2003 Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives CIRP Ann. 52 589-609

[9] [9] Deckard C R 1989 Method and apparatus for producing parts by selective sintering US Patent 4863538

[10] [10] Niino T 2010 Additive manufacturing technologies—from rapid prototyping to rapid manufacturing J. Jpn. Soc. Precis. Eng. 76 1340-4

[11] [11] Kruth J P, Wang X, Laoui T and Froyen L 2003 Lasers and materials in selective laser sintering Assem. Autom. 23 357-71

[12] [12] Kruth J P 1991 Material incress manufacturing by rapid prototyping techniques CIRP Ann. 40 603-14

[13] [13] Calignano F 2014 Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting Mater. Des. 64 203-13

[14] [14] Kruth J-P, Mercelis P, van Vaerenbergh J, Froyen L and Rombouts M 2005 Binding mechanisms in selective laser sintering and selective laser melting Rapid Prototyp. J. 11 26-36

[15] [15] Kruth J-P, Levy G, Klocke F and Childs T H C 2007 Consolidation phenomena in laser and powder-bed based layered manufacturing CIRP Ann. 56 730-59

[16] [16] van der Schueren B 1998 Basic Contributions to the Development of the Selective Metal Powder Sintering Process (Leuven: University of Leuven)

[17] [17] Gu D D, Guo M, Zhang H M, Sun Y X, Wang R and Zhang L 2020 Effects of laser scanning strategies on selective laser melting of pure tungsten Int. J. Extrem. Manuf. 2 025001

[18] [18] Schaffer G and Sercombe T 2003 The production of aluminium SLS prototypes via infiltration Virtual Modell. Rapid Manuf. Adv. Res. Virtual Rapid Prot. 2003 297-301

[19] [19] Bellehumeur C T, Bisaria M and Vlachopoulos J 1996 An experimental study and model assessment of polymer sintering Polym. Eng. Sci. 36 2198-207

[20] [20] Nelson J C, Xue S, Barlow J W, Beaman J J, Marcus H L and Bourell D L 1993 Model of the selective laser sintering of bisphenol-A polycarbonate Ind. Eng. Chem. Res. 32 2305-17

[21] [21] Vasquez G M, Majewski C E, Haworth B and Hopkinson N 2014 A targeted material selection process for polymers in laser sintering Addit. Manuf. 1 127-38

[22] [22] Tobolsky A V and Callinan T D 1960 Properties and structure of polymers J. Electrochem. Soc. 107 243C

[23] [23] Dickens E D Jr, Lee B L, Taylor G A, Magistro A J and Ng H 1994 Sinterable semi-crystalline powder and near-fully dense article formed therewith US Patent 5342919

[24] [24] Gibson I and Shi D P 1997 Material properties and fabrication parameters in selective laser sintering process Rapid Prototyp. J. 3 129-36

[25] [25] Spierings A B, Herres N and Levy G 2011 Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts Rapid Prototyp. J. 17 195-202

[26] [26] Caulfield B, McHugh P E and Lohfeld S 2007 Dependence of mechanical properties of polyamide components on build parameters in the SLS process J. Mater. Process. Technol. 182 477-88

[27] [27] Dupin S, Lame O, Barrès C and Charmeau J-Y 2012 Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering Eur. Polym. J. 48 1611-21

[28] [28] Ho H C H, Gibson I and Cheung W L 1999 Effects of energy density on morphology and properties of selective laser sintered polycarbonate J. Mater. Process. Technol. 89 204-10

[29] [29] Hardro P J J, Wang J H and Stucker B E 1999 Determining the parameter settings and capability of a rapid prototyping process Int. J. Ind. Eng. Theory Appl. Pract. 6 203-13

[30] [30] Beal V E, Paggi R A, Salmoria G V and Lago A 2009 Statistical evaluation of laser energy density effect on mechanical properties of polyamide parts manufactured by selective laser sintering J. Appl. Polym. Sci. 113 2910-9

[31] [31] Beard M A, Ghita O R and Evans K E 2011 Monitoring the effects of selective laser sintering (SLS) build parameters on polyamide using near infrared spectroscopy J. Appl. Polym. Sci. 121 3153-8

[32] [32] Szalay A, Antal I, Zsigmond Z, Marton S, Eros I, Regdon G Jr and Pintye-Hodi K 2005 Study on the relationship between particle size and near infrared diffuse reflectance spectroscopic data Part. Part. Syst. Charact. 22 219-22

[33] [33] Williams J D and Deckard C R 1998 Advances in modeling the effects of selected parameters on the SLS process Rapid Prototyp. J. 4 90-100

[34] [34] Wang R-J, Wang L L, Zhao L H and Liu Z J 2007 Influence of process parameters on part shrinkage in SLS Int. J. Adv. Manuf. Technol. 33 498-504

[35] [35] Eosoly S, Brabazon D, Lohfeld S and Looney L 2010 Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds Acta Biomater. 6 2511-7

[36] [36] Vail N K, Balasubramanian B, Barlow J W and Marcus H L 1996 A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powders Rapid Prototyp. J. 2 24-40

[37] [37] Fang F Z, Zhang N, Guo D M, Ehmann K, Cheung B, Liu K and Yamamura K 2019 Towards atomic and close-toatomic scale manufacturing Int. J. Extrem. Manuf. 1 012001

[38] [38] Nelson J C, Vail N K, Barlow J W, Beaman J J, Bourell D L and Marcus H L 1995 Selective laser sintering of polymer-coated silicon carbide powders Ind. Eng. Chem. Res. 34 1641-51

[39] [39] Meyers S, Kruth J P and Vleugels J 2015 Direct selective laser sintering of reaction bonded silicon carbide Int. Solid Freeform Fabrication Symp. (Austin, TX: University of Texas at Austin)

[40] [40] Chen Y, Peng X, Kong L B, Dong G X, Remani A and Leach R 2021 Defect inspection technologies for additive manufacturing Int. J. Extrem. Manuf. 3 022002

[41] [41] Goodridge R D, Tuck C J and Hague R J M 2012 Laser sintering of polyamides and other polymers Prog. Mater. Sci. 57 229-67

[42] [42] Schmid M and Wegener K 2016 Additive manufacturing: polymers applicable for laser sintering (LS) Proc. Eng. 149 457-64

[43] [43] Mazzoli A 2013 Selective laser sintering in biomedical engineering Med. Biol. Eng. Comput. 51 245-56

[44] [44] Elliott A M, Nandwana P, Siddel D H and Compton B 2016 A method for measuring powder bed density in binder jet additive manufacturing process and the powder feedstock characteristics influencing the powder bed density 2016 Solid Freeform Fabrication Symp. (Oak Ridge, TN: Oak Ridge National Laboratory)

[45] [45] Rietzel D, Aquite W, Drummer D and Osswald T A 2011 Polymer powders for selective laser sintering—production and characterization Proc. 44th CIRP Conf. on Manufacturing Systems (Madison, WI: CIRP) pp 95-99

[46] [46] Ziegelmeier S, Wollecke F, Tuck C and Goodridge R 2013 Characterizing the bulk & flow behaviour of LS polymer powders 2013 Twenty Fourth Annual Int. Solid Freeform Fabrication Symp. (Austin, TX: University of Texas at Austin)

[47] [47] Berretta S, Ghita O, Evans K E, Anderson A and Newman C 2013 Size, shape and flow of powders for use in selective laser sintering (SLS) 6th Int. Conf. on Advanced Research in Virtual and Rapid Prototyping (Leiria)

[48] [48] Drummer D, Rietzel D and Kühnlein F 2010 Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering Phys. Proc. 5 533-42

[49] [49] Shi Y, Li Z, Sun H, Huang S and Zeng F 2004 Effect of the properties of the polymer materials on the quality of selective laser sintering parts Proc. Inst. Mech. Eng. L 218 247-52

[50] [50] Krantz M, Zhang H and Zhu J 2009 Characterization of powder flow: static and dynamic testing Powder Technol. 194 239-45

[51] [51] Schmid M, Amado F, Levy G and Wegener K 2013 Flowability of powders for selective laser sintering (SLS) investigated by round robin test High Value Manufacturing: Proc. 6th Int. Conf. on Advanced Research in Virtual and Rapid Prototyping. (Leiria, TX:Taylor & Francis)

[52] [52] Hiemenz P C and Lodge T P 2007 Polymer Chemistry 2nd edn (Boca Raton, FL: CRC Press)

[53] [53] Niino T and Sato K 2009 Effect of powder compaction in plastic laser sintering fabrication 2009 Int. Solid Freeform Fabrication Symp. (Austin, TX: University of Texas at Austin)

[54] [54] Ho H C H, Cheung W L and Gibson I 2003 Morphology and properties of selective laser sintered bisphenol a polycarbonate Ind. Eng. Chem. Res. 42 1850-62

[55] [55] Yan C, Shi Y and Hao L 2011 Investigation into the differences in the selective laser sintering between amorphous and semi-crystalline polymers Int. Polym. Process. 26 416-23

[56] [56] Subramanian K, Vail N, Barlow J and Marcus H 1995 Selective laser sintering of alumina with polymer binders Rapid Prototyp. J. 1 24-35

[57] [57] Gornet T J, Davis K R, Starr T L and Mulloy K M 2002 Characterization of selective laser sinteringTM materials to determine process stability Proc. 2002 Int. Solid Freeform Fabrication Symp. (TX: The University of Texas at Austin)

[58] [58] Zarringhalam H, Hopkinson N, Kamperman N F and de Vlieger J J 2006 Effects of processing on microstructure and properties of SLS nylon 12 Mater. Sci. Eng. A 435-6 172-80

[59] [59] Wei C, Zhang Z Z, Cheng D X, Sun Z, Zhu M H and Li L 2020 An overview of laser-based multiple metallic material additive manufacturing: from macro-to micro-scales Int. J. Extrem. Manuf. 3 012003

[60] [60] Dadbakhsh S, Verbelen L, Verkinderen O, Strobbe D, van Puyvelde P and Kruth J-P 2017 Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts Eur. Polym. J. 92 250-62

[61] [61] Pham D T, Dotchev K and Yusoff W 2008 Deterioration of polyamide powder properties in the laser sintering process Proc. Inst. Mech. Eng. C 222 2163-76

[62] [62] Kuehnlein F, Drummer D, Rietzel D and Seefried A 2010 Degradation behavior and material properties of PA12-plastic powders processed by powder based additive manufacturing technologies Proc. Int. DAAAM Symp. on Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions; European DAAAM Int. Young Researches and Scientists Conf. (Vienna: DAAAM)

[63] [63] Drummer D, Wudy K and Drexler M 2015 Modelling of the aging behavior of polyamide 12 powder during laser melting process AIP Conf. Proc. 1664 160007

[64] [64] Wudy K, Drummer D, Kühnlein F and Drexler M 2014 Influence of degradation behavior of polyamide 12 powders in laser sintering process on produced parts AIP Conf. Proc. 1593 691-5

[65] [65] Magill J H 2001 Review spherulites: a personal perspective J. Mater. Sci. 36 3143-64

[66] [66] Weinmann S and Bonten C 2020 Recycling of PA12 powder for selective laser sintering AIP Conf. Proc. 2289 020056

[67] [67] Wang L, Kiziltas A, Mielewski D F, Lee E C and Gardner D J 2018 Closed-loop recycling of polyamide12 powder from selective laser sintering into sustainable composites J. Clean. Prod. 195 765-72

[68] [68] Kumar A V and Zhang H 1999 Electrophotographic powder deposition for freeform fabrication Proc. 10th Solid Freeform Fabrication Symp. (Gainesville, FL: University of Florida) pp 639-46

[69] [69] Kumar A V, Dutta A and Fay J E 2004 Electrophotographic printing of part and binder powders Rapid Prototyp. J. 10 7-13

[70] [70] Kumar A V and Dutta A 2003 Investigation of an electrophotography based rapid prototyping technology Rapid Prototyp. J. 9 95-103

[71] [71] Santosa J, Jing D and Das S 2002 Experimental and numerical study on the flow of fine powders from small-scale hoppers applied to SLS multi-material deposition-part I Proc. 2002 Int. Solid Freeform Fabrication Symp. (TX: The University of Texas at Austin) pp 620-8

[72] [72] Kumar P, Santosa J K, Beck E and Das S 2004 Direct-write deposition of fine powders through miniature hopper-nozzles for multi-material solid freeform fabrication Rapid Prototyp. J. 10 14-23

[73] [73] Cai C, Tey W S, Chen J Y, Zhu W, Liu X J, Liu T, Zhao L H and Zhou K 2021 Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion J. Mater. Process. Technol. 288 116882

[74] [74] O’Connor H J and Dowling D P 2020 Comparison between the properties of polyamide 12 and glass bead filled polyamide 12 using the multi jet fusion printing process Addit. Manuf. 31 100961

[75] [75] Khoshnevis B, Asiabanpour B, Mojdeh M and Palmer K 2003 SIS—a new SFF method based on powder sintering Rapid Prototyp. J. 9 30-36

[76] [76] Asiabanpour B, Palmer K and Khoshnevis B 2004 An experimental study of surface quality and dimensional accuracy for selective inhibition of sintering Rapid Prototyp. J. 10 181-92

[77] [77] Asiabanpour B, Khoshnevis B and Palmer K 2006 Advancements in the selective inhibition sintering process development Virtual Phys. Prototyp. 1 43-52

[78] [78] Jun Y W, Hsieh C H and Lin Z Y 2022 Novel high-speed 3D printing method using selective oil sintering with thermoplastic polyurethane powder printing Int. J. Bioprint. 8 521

[80] [80] Dowling N E 2012 Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue 4th edn (Upper Saddle River, NJ: Pearson)

[81] [81] Dobbelstein H, George E P, Gurevich E L, Kostka A, Ostendorf A and Laplanche G 2020 Laser metal deposition of refractory high-entropy alloys for high-throughput synthesis and structure-property characterization Int. J. Extrem. Manuf. 3 015201

[82] [82] Lammens N, Kersemans M, de Baere I and van Paepegem W 2017 On the visco-elasto-plastic response of additively manufactured polyamide-12 (PA-12) through selective laser sintering Polym. Test. 57 149-55

[83] [83] Hopkinson N, Majewski C E and Zarringhalam H 2009 Quantifying the degree of particle melt in selective laser sintering CIRP Ann. 58 197-200

[84] [84] Bai J M, Zhang B C, Song J, Bi G J, Wang P and Wei J 2016 The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering Polym. Test. 52 89-93

[85] [85] Rimell J T and Marquis P M 2000 Selective laser sintering of ultra high molecular weight polyethylene for clinical applications J. Biomed. Mater. Res. 53 414-20

[86] [86] Chen C H, Lee M Y, Shyu V B H, Chen Y C, Chen C T and Chen J P 2014 Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering Mater. Sci. Eng. C 40 389-97

[87] [87] Williams J M, Adewunmi A, Schek R M, Flanagan C L, Krebsbach P H, Feinberg S E, Hollister S J and Das S 2005 Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Biomaterials 26 4817-27

[88] [88] Tan K H, Chua C K, Leong K F, Cheah C M, Cheang P, Abu Bakar M S and Cha S W 2003 Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends Biomaterials 24 3115-23

[89] [89] Schmidt M, Pohle D and Rechtenwald T 2007 Selective laser sintering of PEEK CIRP Ann. 56 205-8

[90] [90] Scholten H and Christoph W 2001 Use of a nylon-12 for selective laser sintering US Patent 6245281

[91] [91] Verbelen L, Dadbakhsh S, van den Eynde M, Kruth J-P, Goderis B and van Puyvelde P 2016 Characterization of polyamide powders for determination of laser sintering processability Eur. Polym. J. 75 163-74

[92] [92] van Hooreweder B and Kruth J-P 2014 High cycle fatigue properties of selective laser sintered parts in polyamide 12 CIRP Ann. 63 241-4

[93] [93] van Hooreweder B, de Coninck F, Moens D, Boonen R and Sas P 2010 Microstructural characterization of SLS-PA12 specimens under dynamic tension/compression excitation Polym. Test. 29 319-26

[94] [94] Shi Y, Chen J, Wang Y, Li Z and Huang S 2007 Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement Proc. Inst. Mech. Eng. L 221 37-42

[95] [95] Fan K M, Cheung W L and Gibson I 2005 Movement of powder bed material during the selective laser sintering of bisphenol-A polycarbonate Rapid Prototyp. J. 11 188-98

[96] [96] Kontopoulou M and Vlachopoulos J 2001 Melting and densification of thermoplastic powders Polym. Eng. Sci. 41 155-69

[97] [97] Strobbe D, Dadbakhsh S, Verbelen L, van Puyvelde P and Kruth J-P 2018 Selective laser sintering of polystyrene: a single-layer approach Plast. Rubb. Compos. 47 2-8

[98] [98] Athreya S R, Kalaitzidou K and Das S 2010 Processing and characterization of a carbon black-filled electrically conductive nylon-12 nanocomposite produced by selective laser sintering Mater. Sci. Eng. A 527 2637-42

[99] [99] Tolochko N K, Khlopkov Y V, Mozzharov S E, Ignatiev M B, Laoui T and Titov V I 2000 Absorptance of powder materials suitable for laser sintering Rapid Prototyp. J. 6 155-61

[100] [100] Khazaee S, Kiani A, Badrossamay M and Foroozmehr E 2021 Selective laser sintering of polystyrene: preserving mechanical properties without post-processing J. Mater. Eng. Perform. 30 3068-78

[101] [101] Ku C W, Gibson I and Cheung W L 2002 Selective laser sintered CastFormTM polystyrene with controlled porosity and its infiltration characteristics by red wax Proc. 2002 Int. Solid Freeform Fabrication Symp. (TX: The University of Texas at Austin)

[102] [102] Dotchev K D, Dimov S S, Pham D T and Ivanov A I 2007 Accuracy issues in rapid manufacturing CastForm patterns Proc. Inst. Mech. Eng. B 221 53-67

[103] [103] Jagur-Grodzinski J 1999 Biomedical application of functional polymers React. Funct. Polym. 39 99-138

[104] [104] Rechtenwald T, Krauss H J, Pohle D and Schmidt M 2007 Small scale and micro featured functional prototypes generated by laser sintering of polyetheretherketone Proc. SPIE 6462 646203

[105] [105] Tan K H, Chua C K, Leong K F, Naing M W and Cheah C M 2005 Fabrication and characterization of threedimensional poly (ether-ether-ketone)/-hydroxyapatite biocomposite scaffolds using laser sintering Proc. Inst. Mech. Eng. H 219 183-94

[106] [106] Chen P et al 2020 Crystallization kinetics of polyetheretherketone during high temperature-selective laser sintering Addit. Manuf. 36 101615

[107] [107] Hoskins T J, Dearn K D and Kukureka S N 2018 Mechanical performance of PEEK produced by additive manufacturing Polym. Test. 70 511-9

[108] [108] von Wilmowsky C et al 2008 Effects of bioactive glass and β-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro J. Biomed. Mater. Res. A 87 896-902

[109] [109] Kroh M, Bonten C and Eyerer P 2014 Improvement of mechanical properties by additive assisted laser sintering of PEEK AIP Conf. Proc. 1593 724-7

[110] [110] Akter F 2016 Principles of tissue engineering Tissue Engineering Made Easy ed F Akter (New York: Elsevier) pp 3-16

[111] [111] Singh S, Ramakrishna S and Berto F 2020 3D printing of polymer composites: a short review Mater. Des. Process. Commun. 2 e97

[112] [112] Shuai C J et al 2016 Characterization and bioactivity evaluation of (polyetheretherketone/polyglycolicacid)-hydroyapatite scaffolds for tissue regeneration Materials 9 934

[113] [113] Lai W W, Wang Y, Fu H and He J K 2020 Hydroxyapatite/polyetheretherketone nanocomposites for selective laser sintering: thermal and mechanical performances e-Polymers 20 542-9

[114] [114] Lehtonen T J, Tuominen J U and Hiekkanen E 2013 Resorbable composites with bioresorbable glass fibers for load-bearing applications. In vitro degradation and degradation mechanism Acta Biomater. 9 4868-77

[115] [115] Cheung H Y, Lau K T, Lu T P and Hui D 2007 A critical review on polymer-based bio-engineered materials for scaffold development Composites B 38 291-300

[116] [116] Huang Z-M, Zhang Y-Z, Kotaki M and Ramakrishna S 2003 A review on polymer nanofibers by electrospinning and their applications in nanocomposites Compos. Sci. Technol. 63 2223-53

[117] [117] Zavyalov S A, Pivkina A N and Schoonman J 2002 Formation and characterization of metal-polymer nanostructured composites Solid State Ion. 147 415-9

[118] [118] Guo S Z, Zhang C, Wang W Z, Liu T X, Tjiu W C, He C B and Zhang W D 2008 Preparation and characterization of polyurethane/multiwalled carbon nanotube composites Polym. Polym. Compos. 16 501-7

[119] [119] Bryning M B, Islam M F, Kikkawa J M and Yodh A G 2005 Very low conductivity threshold in bulk isotropic single-walled carbon nanotube-epoxy composites Adv. Mater. 17 1186-91

[120] [120] Hon K K B and Gill T J 2003 Selective laser sintering of SiC/polyamide composites CIRP Ann. 52 173-6

[121] [121] Mazzoli A, Moriconi G and Pauri M G 2007 Characterization of an aluminum-filled polyamide powder for applications in selective laser sintering Mater. Des. 28 993-1000

[122] [122] Kim J and Creasy T S 2004 Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite Polym. Test. 23 629-36

[123] [123] Yan C Z, Shi Y S, Yang J S and Liu J H 2009 A nanosilica/nylon-12 composite powder for selective laser sintering J. Reinf. Plast. Compos. 28 2889-902

[124] [124] Zheng H Z, Zhang J, Lu S Q, Wang G C and Xu Z F 2006 Effect of core-shell composite particles on the sintering behavior and properties of nano-Al2O3/polystyrene composite prepared by SLS Mater. Lett. 60 1219-23

[125] [125] Zhang H, Zhang Z, Friedrich K and Eger C 2006 Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content Acta Mater. 54 1833-42

[126] [126] Bréchet Y, Cavaillé J Y, Chabert E, Chazeau L, Dendievel R, Flandin L and Gauthier C 2001 Polymer based nanocomposites: effect of filler-filler and filler-matrix interactions Adv. Eng. Mater. 3 571-7

[127] [127] Espera A H Jr, Valino A D, Palaganas J O, Souza L, Chen Q and Advincula R C 2019 3D printing of a robust polyamide-12-carbon black composite via selective laser sintering: thermal and electrical conductivity Macromol. Mater. Eng. 304 1800718

[128] [128] Yan C Z, Hao L, Xu L and Shi Y S 2011 Preparation, characterisation and processing of carbon fibre/ polyamide-12 composites for selective laser sintering Compos. Sci. Technol. 71 1834-41

[129] [129] Chung H and Das S 2008 Functionally graded nylon-11/ silica nanocomposites produced by selective laser sintering Mater. Sci. Eng. A 487 251-7

[130] [130] Hong R, Zhao Z H, Leng J, Wu J J and Zhang J 2019 Two-step approach based on selective laser sintering for high performance carbon black/polyamide 12 composite with 3D segregated conductive network Composites B 176 107214

[131] [131] Craft G, Nussbaum J, Crane N and Harmon J P 2018 Impact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processes Addit. Manuf. 22 800-6

[132] [132] Majewski C, Zarringhalam H and Hopkinson N 2008 Effect of the degree of particle melt on mechanical properties in selective laser-sintered nylon-12 parts Proc. Inst. Mech. Eng. B 222 1055-64

[133] [133] Athreya S R, Kalaitzidou K and Das S 2011 Mechanical and microstructural properties of nylon-12/carbon black composites: selective laser sintering versus melt compounding and injection molding Compos. Sci. Technol. 71 506-10

[134] [134] Jain P K, Pandey P M and Rao P V M 2010 Selective laser sintering of clay-reinforced polyamide Polym. Compos. 31 732-43

[135] [135] Dikshit V, Goh G D, Nagalingam A P, Goh G L and Yeong W Y 2020 Recent progress in 3D printing of fiber-reinforced composite and nanocomposites Fiber-Reinforced Nanocomposites: Fundamentals and Applications: A Volume in Micro and Nano Technologies ed B G Han, S Sharma, T A Nguyen, L B Li and K S Bhat (Amsterdam: Elsevier) pp 371-94

[136] [136] Yuan S Q, Zheng Y, Chua C K, Yan Q Y and Zhou K 2018 Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering Composites A 105 203-13

[137] [137] Awad H A, Keefe R J, Lee C H and Mao J J 2014 Bone tissue engineering: clinical challenges and emergent advances in orthopedic and craniofacial surgery Principles of Tissue Engineering 4th edn, ed R Lanza, R Langer and J Vacanti (San Diego, CA: Elsevier)

[138] [138] Antonov E N, Bagratashvili V N, Whitaker M J, Barry J J A, Shakesheff K M, Konovalov A N, Popov V K and Howdle S M 2005 Three-dimensional bioactive and biodegradable scaffolds fabricated by surface-selective laser sintering Adv. Mater. 17 327-30

[139] [139] Chua C K, Leong K F, Tan K H, Wiria F E and Cheah C M 2004 Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects J. Mater. Sci. Mater. Med. 15 1113-21

[140] [140] Partee B, Hollister S J and Das S 2006 Selective laser sintering process optimization for layered manufacturing of CAPA 6501 polycaprolactone bone tissue engineering scaffolds J. Manuf. Sci. Eng. 128 531-40

[141] [141] Yeong W Y, Sudarmadji N, Yu H Y, Chua C K, Leong K F, Venkatraman S S, Boey Y C F and Tan L P 2010 Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering Acta Biomater. 6 2028-34

[142] [142] Eshraghi S and Das S 2010 Mechanical and microstructural properties of polycaprolactone scaffolds with onedimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering Acta Biomater. 6 2467-76

[143] [143] Niino T, Naruke H, Oizumi S, Sakai Y and Huang H Y 2007 Fabrication of three-dimensional scaffolds for regeneration of high-metabolic-rate organs by selective laser sintering using water leachable filler-fabrication of porous bodies with fine flow channel network from biodegradable plastic J. Jpn. Soc. Precis. Eng. 73 1246-50

[144] [144] Niino T, Hamajima D, Montagne K, Oizumi S, Naruke H, Huang H, Sakai Y, Kinoshita H and Fujii T 2011 Laser sintering fabrication of three-dimensional tissue engineering scaffolds with a flow channel network Biofabrication 3 034104

[145] [145] Niino T and Sakai Y 2007 Solid freeform fabrication of tissue engineering scaffolds J. Jpn. Soc. Precis. Eng. 73 528-32

[146] [146] Huang H Y, Oizumi S, Kojima N, Niino T and Sakai Y 2007 Avidin-biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network Biomaterials 28 3815-23

[147] [147] Niino T, Sakai Y, Huang H Y and Naruke H 2006 SLS fabrication of highly porous model including fine flow channel network aiming at regeneration of highly metabolic organs 2006 Int. Solid Freeform Fabrication Symp. (TX: The University of Texas at Austin) pp 160-70

[148] [148] Huang H Y, Naruke H, Oizumi S, Kojima N and Niino T 2006 A porous perfusion bioreactor that possess microchannels: its fabrication by selective laser sintering and preliminary evaluation of culture of human hepatoma hep G2 cells Proc. 2006 AIChE Annual Meeting (New York: American Institute of Chemical Engineers)

[149] [149] Shi Y S, Pan T, Zhu W, Yan C Z and Xia Z D 2020 Artificial bone scaffolds of coral imitation prepared by selective laser sintering J. Mech. Behav. Biomed. Mater. 104 103664

[150] [150] Zeng H, Pathak J L, Shi Y S, Ran J B, Liang L, Yan Q, Wu T, Fan Q H, Li M X and Bai Y 2020 Indirect selective laser sintering-printed microporous biphasic calcium phosphate scaffold promotes endogenous bone regeneration via activation of ERK1/2 signaling Biofabrication 12 025032

[151] [151] Diermann S H, Lu M Y, Zhao Y T, Vandi L J, Dargusch M and Huang H 2018 Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering J. Mech. Behav. Biomed. Mater. 84 151-60

[152] [152] Zhang C, Zhu J K, Zheng H, Li H, Liu S and Cheng G J 2020 A review on microstructures and properties of high entropy alloys manufactured by selective laser melting Int. J. Extrem. Manuf. 2 032003

[153] [153] Diermann S H, Lu M Y, Edwards G, Dargusch M and Huang H 2019 In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering J. Biomed. Mater. Res. A 107 154-62

[154] [154] Diermann S H, Lu M Y, Dargusch M, Grondahl L and Huang H 2019 Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering J. Biomed. Mater. Res. B 107 2596-610

[155] [155] Lusardi M M, Jorge M and Nielsen C C 2012 Orthotics and Prosthetics in Rehabilitation 3rd edn (St. Louis, MO: Saunders)

[156] [156] Smith D G and Burgess E M 2001 The use of CAD/CAM technology in prosthetics and orthotics-current clinical models and a view to the future J. Rehabil. Res. Dev. 38 327-34

[157] [157] Faustini M C, Neptune R R, Crawford R H and Stanhope S J 2008 Manufacture of passive dynamic ankle-foot orthoses using selective laser sintering IEEE Trans. Biomed. Eng. 55 784-90

[158] [158] Chen R K, Jin Y A, Wensman J and Shih A 2016 Additive manufacturing of custom orthoses and prostheses—a review Addit. Manuf. 12 77-89

[159] [159] Giannatsis J and Dedoussis V 2009 Additive fabrication technologies applied to medicine and health care: a review Int. J. Adv. Manuf. Technol. 40 116-27

[160] [160] Pallari J H P, Dalgarno K W and Woodburn J 2010 Mass customization of foot orthoses for rheumatoid arthritis using selective laser sintering IEEE Trans. Biomed. Eng. 57 1750-6

[161] [161] Bibb R, Eggbeer D, Evans P, Bocca A and Sugar A 2009 Rapid manufacture of custom-fitting surgical guides Rapid Prototyp. J. 15 346-54

[162] [162] Nair P S, Trisno J, Wang H T and Yang J K W 2020 3D printed fiber sockets for plug and play micro-optics Int. J. Extrem. Manuf. 3 015301

[163] [163] Ge Q, Li Z Q, Wang Z L, Kowsari K, Zhang W, He X N, Zhou J L and Fang N X 2020 Projection micro stereolithography based 3D printing and its applications Int. J. Extrem. Manuf. 2 022004

[164] [164] Tino R, Leary M, Yeo A, Kyriakou E, Kron T and Brandt M 2020 Additive manufacturing in radiation oncology: a review of clinical practice, emerging trends and research opportunities Int. J. Extrem. Manuf. 2 012003

[165] [165] Wu G F, Zhou B, Bi Y P and Zhao Y M 2008 Selective laser sintering technology for customized fabrication of facial prostheses J. Prosthet. Dent. 100 56-60

[166] [166] Gibson J R 1981 Maxillofacial rehabilitation: prosthodontic and surgical considerations Br. J. Plast. Surg. 34 115

[167] [167] El Halabi F, Rodriguez J F, Rebolledo L, Hurtos E and Doblaré M 2011 Mechanical characterization and numerical simulation of polyether-ether-ketone (PEEK) cranial implants J. Mech. Behav. Biomed. Mater. 4 1819-32

[168] [168] di Giacomo G, Silva J, Martines R and Ajzen S 2014 Computer-designed selective laser sintering surgical guide and immediate loading dental implants with definitive prosthesis in edentulous patient: a preliminary method Eur. J. Dent. 8 100-6

[169] [169] di Giacomo G D A P, Cury P R, da Silva A M, da Silva J V L and Ajzen S A 2016 A selective laser sintering prototype guide used to fabricate immediate interim fixed complete arch prostheses in flapless dental implant surgery: technique description and clinical results J. Prosthet. Dent. 116 874-9

[170] [170] di Giacomo G A, da Silva J V, da Silva A M, Paschoal G H, Cury P R and Szarf G 2012 Accuracy and complications of computer-designed selective laser sintering surgical guides for flapless dental implant placement and immediate definitive prosthesis installation J. Periodontol. 83 410-9

[171] [171] Awad A, Fina F, Goyanes A, Gaisford S and Basit A W 2020 3D printing: principles and pharmaceutical applications of selective laser sintering Int. J. Pharmaceut. 586 119594

[172] [172] Charoo N A, Ali S F B, Mohamed E M, Kuttolamadom M A, Ozkan T, Khan M A and Rahman Z 2020 Selective laser sintering 3D printing—an overview of the technology and pharmaceutical applications Drug Dev. Ind. Pharm. 46 869-77

[173] [173] Allahham N, Fina F, Marcuta C, Kraschew L, Mohr W, Gaisford S, Basit A W and Goyanes A 2020 Selective laser sintering 3D printing of orally disintegrating printlets containing ondansetron Pharmaceutics 12 110

[174] [174] Awad A, Fina F, Trenfield S J, Patel P, Goyanes A, Gaisford S and Basit A W 2019 3D printed pellets (miniprintlets): a novel, multi-drug, controlled release platform technology Pharmaceutics 11 148

[175] [175] Dotchev K and Yusoff W 2009 Recycling of polyamide 12 based powders in the laser sintering process Rapid Prototyp. J. 15 192-203

[176] [176] Fina F, Goyanes A, Gaisford S and Basit A W 2017 Selective laser sintering (SLS) 3D printing of medicines Int. J. Pharmaceut. 529 285-93

[177] [177] Fina F, Goyanes A, Madla C M, Awad A, Trenfield S J, Kuek J M, Patel P, Gaisford S and Basit A W 2018 3D printing of drug-loaded gyroid lattices using selective laser sintering Int. J. Pharmaceut. 547 44-52

[178] [178] Fina F, Madla C M, Goyanes A, Zhang J X, Gaisford S and Basit A W 2018 Fabricating 3D printed orally disintegrating printlets using selective laser sintering Int. J. Pharmaceut. 541 101-7

[179] [179] Lahtinen E, Precker R L M, Lahtinen M, Hey-Hawkins E and Haukka M 2019 Selective laser sintering of metal-organic frameworks: production of highly porous filters by 3D printing onto a polymeric matrix ChemPlusChem 84 222-5

[180] [180] Lahtinen E, Turunen L, Hanninen M M, Kolari K, Tuononen H M and Haukka M 2019 Fabrication of porous hydrogenation catalysts by a selective laser sintering 3D printing technique ACS Omega 4 12012-7

[181] [181] Bulatov E, Lahtinen E, Kivijarvi L, Hey-Hawkins E and Haukka M 2020 3D printed palladium catalyst for Suzuki-Miyaura cross-coupling reactions ChemCatChem 12 4831-8

[182] [182] Lahtinen E, Kivijarvi L, Tatikonda R, Vaisanen A, Rissanen K and Haukka M 2017 Selective recovery of gold from electronic waste using 3D-printed scavenger ACS Omega 2 7299-304

[183] [183] Lahtinen E, Hanninen M M, Kinnunen K, Tuononen H M, Vaisanen A, Rissanen K and Haukka M 2018 Porous 3D printed scavenger filters for selective recovery of precious metals from electronic waste Adv. Sustain. Syst. 2 1800048

[184] [184] Sun P B, Zhang L J and Tao S Y 2019 Preparation of hybrid chitosan membranes by selective laser sintering for adsorption and catalysis Mater. Des. 173 107780

[185] [185] Yang J U, Cho J H and Yoo M J 2017 Selective metallization on copper aluminate composite via laser direct structuring technology Composites B 110 361-7

[186] [186] Sun Y S and Niino T 2016 Laser sintering of LDS material 2016 12th Int. Congress Molded Interconnect Devices (MID) (Wuerzburg: IEEE) pp 1-5

[187] [187] Gath C and Drummer D 2016 Curcuit board application to additive manufactured components by laser-direct-structuring 2016 12th Int. Congress Molded Interconnect Devices (MID) (Wuerzburg: IEEE) pp 1-6

[188] [188] Folgar C E, Folgar L N and Cormier D 2013 Multifunctional material direct printing for laser sintering systems Proc. 2013 Int. Solid Freeform Fabrication Symp. (TX: The University of Texas at Austin)

[189] [189] Sigmarsson H H, Kinzel E C, Xu X F and Chappell W J 2006 Selective laser sintering of multilayer, multimaterial circuit components 2006 IEEE MTT-S Int. Microwave Symp. Digest (San Francisco, CA: IEEE) pp 1788-91