[1] [1] NIE H H, XU L, SONG D W, et al. LiCoO2: Recycling from spent batteries and regeneration with solid state synthesis［J］. Green Chem, 2015, 17(2): 1276-1280.

[2] [2] LI X, WANG N, GUO S, et al. Research progress in recycling of spent power Li-ion battery［J］. Battery Bimonthly, 2017, 47(1): 52-55.

[3] [3] HU G, HU N, WU J, et al. Research progress in recovery of valuable metals in cathode materials for lithium-ion batteries［J］. Chin J Nonferr Metals, 2021, 31(11): 3320-3343.

[4] [4] IVANISHCHEV A V, BOBRIKOV I A, IVANISHCHEVA I A, et al. Study of structural and electrochemical characteristics of LiNi0.33Mn0.33Co0.33O2 electrode at lithium content variation［J］. J Electroanal Chem, 2018, 821: 140-151.

[5] [5] SHI Y, CHEN G, CHEN Z. Effective regeneration of LiCoO2 from spent lithium-ion batteries: A direct approach towards high-performance active particles［J］. Green Chem, 2018, 20(4): 851-862.

[6] [6] QIU X J, HU J G, TIAN Y, et al. Highly efficient re-cycle/generation of LiCoO2 cathode assisted by 2-naphthalenesulfonic acid［J］. J Hazard Mater, 2021, 416: 126114.

[7] [7] WANG Y, YU H J, LIU Y, et al. Sustainable regenerating of high-voltage performance LiCoO2 from spent lithium-ion batteries by interface engineering［J］. Electrochim Acta, 2022, 407: 139863.

[8] [8] LIU W M, HU G R, DU K, et al. Synthesis and characterization of LiCoO2-coated LiNi0.8Co0.15Al0.05O2 cathode materials［J］. Mater Lett, 2012, 83: 11-13.

[9] [9] YANG X Y, YAN H G, CHEN J H, et al. Solid state synthesis of ultrafine-LiCoO2 by enhanced thermal decomposition of carbonate precursors followed by double-calcining［J］. Solid State Ion, 2016, 289: 159-167.

[10] [10] HE J J. Preparation of ternary cathode materials from spent lithium batteries at low temperature［J］. Int J Electrochem Sci, 2021: 210342.

[12] [12] CHEN X Q, YANG C F, YANG Y B, et al. Co-precipitation preparation of Ni-Co-Mn ternary cathode materials by using the sources extracting directly from spent lithium-ion batteries［J］. J Alloys Compd, 2022, 909: 164691.

[13] [13] CAO Z K, LI J D, LI Z, et al. Experimental process and kinetic behavior of carbothermal reduction of lithium cobaltate as a cathode for waste lithium batteries［J］. Mater Express, 2021, 11(12): 1988-1996.

[15] [15] HELAN M, BERCHMANS L J, HUSSAIN A Z. Synthesis of LiMn2O4 by molten salt technique［J］. Ionics, 2010, 16(3): 227-231.

[16] [16] CHANG Z R, YU X, TANG H W, et al. Synthesis of LiNi1/3Co1/3Al1/3O2 cathode material with eutectic molten salt LiOH-LiNO3［J］. Powder Technol, 2011, 207(1-3): 396-400.

[18] [18] ZHAO Y J, REN W F, WU R, et al. Synthesis and modification of Li-rich cathode material 0.5Li2MnO3·0.5LiCoO2 by molten salt method［J］. Modern Chem Ind, 2013, 33(8): 53-57, 59.

[19] [19] WANG F, WANG Y M, SUN D M, et al. High performance Li2MnSiO4 prepared in molten KCl-NaCl for rechargeable lithium ion batteries［J］. Electrochim Acta, 2014, 119: 131-137.

[20] [20] ZHAO C H, HU Z B, SHEN Q. Molten salt-assisted template synthesis of lithium-rich layered oxide 0.3Li2MnO3·0.7LiNi1/3Co1/3Mn1/3O2 nanorods as lithium-ion battery cathode［J］. Micro Nano Lett, 2015, 10(2): 122-125.

[21] [21] MA T F, GUO Z X, SHEN Z, et al. Molten salt-assisted regeneration and characterization of submicron-sized LiNi0.5Co0.2Mn0.3O2 crystals from spent lithium ion batteries［J］. J Alloys Compd, 2020, 848: 156591.

[22] [22] LI L, LIU Y, YU H, et al. Hollow spherical 0.5Li2MnO3center dot 0.5LiMn1/3Ni1/3CO1/3O2 prepared by facile molten salt method for enhanced long-cycle and rate capability of lithium-ion batteries［J］. J Alloys Compounds, 2021: 855-861.

[23] [23] LI X Q, ZHOU L M, WANG H, et al. Dopants modulate crystal growth in molten salts enabled by surface energy tuning［J］. J Mater Chem A, 2021, 9(35): 19675-19680.

[24] [24] ZHANG Q L, XI B J, CHEN W H, et al. Synthesis of carbon nanotubes-supported porous silicon microparticles in low-temperature molten salt for high-performance Li-ion battery anodes［J］. Nano Res, 2022, 15(7): 6184-6191.

[26] [26] GAO K, DAI C S, LV J, et al. Thermal dynamics and optimization on solid-state reaction for synthesis of Li2MnSiO4 materials［J］. J Power Sources, 2012, 211: 97-102.

[28] [28] LI J, LAI Y M, ZHU X Q, et al. Pyrolysis kinetics and reaction mechanism of the electrode materials during the spent LiCoO2 batteries recovery process［J］. J Hazard Mater, 2020, 398: 122955.

[29] [29] LLUSCO A, GRAGEDA M, USHAK S. Kinetic and thermodynamic studies on synthesis of Mg-doped LiMn2O4 nanoparticles［J］. Nanomaterials (Basel), 2020, 10(7): 1409.

[30] [30] CHEN Z X, QIU S, CAO Y L, et al. Surface-oriented and nanoflake-stacked LiNi0.5Mn1.5O4 spinel for high-rate and long-cycle-life lithium ion batteries［J］. J Mater Chem, 2012, 22(34): 17768-17772.