Optics and Precision Engineering, Volume. 25, Issue 9, 2377(2017)
Mixing characteristics of passive-type micro-mixer with 3D-asymmetrical rhombus
[2] [2] LIAO X CH, ZHENG H F, YUAN M, et al.. High-power light-emitting-diode induced fluorescence detector for microfluidic chip analysis [J]. Opt. Precision Eng., 2009, 17(12): 2906-2911.(in Chinese)
[3] [3] JEONG G S, CHUNG S, KIM C B, et al.. Applications of micromixing technology [J]. Analyst, 2010, 135(3): 460-473.
[4] [4] HENRY OYF, OSULLIVAN CK. Rapid DNA hybridization in microfluidics [J].TRAC Trends in Analytical Chemistry, 2012, 33: 9-22.
[5] [5] LI Y, ZHANG D L, FENG X J, et al.. A microsecond microfluidic mixer for characterizing fast biochemical reactions [J]. Talanta, 2012, 88: 175-180.
[7] [7] HSIAO K Y, WU C Y, HUANG Y T. Fluid mixing in a microchannel with longitudinal vortex generators [J].Chemical Engineering Journal, 2014, 235: 27-36.
[9] [9] FU L M, FANG W C, HOU H H, et al.. Rapid vortex microfluidic mixer utilizing double-heart chamber [J].Chemical Engineering Journal, 2014, 249: 246-251.
[10] [10] OZCELIK A, AHMED D, XIE Y, et al.. An acoustofluidic micromixer via bubble inception and cavitation from microchannel sidewalls [J].Anal Chem, 2014, 86(10): 5083-5088.
[11] [11] FU Q, LU C D. Influence of typical passive micromixer on sensitivity of changing Re [J]. Chem Eng., 2016, 44(6): 18-21.(in Chinese)
[12] [12] HOSSAIN S, KIM K Y. Mixing performance of a serpentine micromixer with non-aligned inputs [J].Micromachines, 2015, 6(7): 842-854.
[13] [13] VIKTOROV V, MAHMUD M R, VISCONTE C. Numerical study of fluid mixing at different inlet flow-rate ratios in Tear-drop and Chain micromixers compared to a new H-C passive micromixer [J].Engineering Applications of Computational Fluid Mechanics, 2016, 10(1): 182-192.
[15] [15] BESSOTH F G, DEMELLO A J, MANZ A. Microstructure for efficient continuous flow mixing [J].Analytical Communications, 1999, 36(6): 213-215.
[16] [16] CHUNG C K, SHIH T R. Effect of geometry on fluid mixing of the rhombic micromixers [J].Microfluidics and Nanofluidics, 2008, 4(5): 419-425.
[17] [17] AFZAL A, KIM K Y. Passive split and recombination micromixer with convergent-divergent walls [J].Chemical Engineering Journal, 2012, 203: 182-192.
[18] [18] CHUNG C K, CHANG C K, LAI C C. Simulation and fabrication of a branch-channel rhombic micromixer for low pressure drop and short mixing length [J].Microsystem Technologies, 2013, 20(10-11): 1981-1986.
[19] [19] LI J, XIA G, LI Y. Numerical and experimental analyses of planar asymmetric split-and-recombine micromixer with dislocation sub-channels [J]. Journal of Chemical Technology & Biotechnology, 2013, 88(9): 1757-1765.
[20] [20] SHEU T S, CHEN S J, CHEN J J. Mixing of a split and recombine micromixer with tapered curved microchannels [J].Chemical Engineering Science, 2012, 71: 321-332.
[21] [21] CORTES-QUIROZ CA, AZARBADEGAN A, ZANGENEH M. Evaluation of flow characteristics that give higher mixing performance in the 3-D T-mixer versus the typical T-mixer [J].Sensors and Actuators B: Chemical, 2014, 202: 1209-1219.
[22] [22] LIU K, YANG Q, CHEN F, et al.. Design and analysis of the cross-linked dual helical micromixer for rapid mixing at low Reynolds numbers [J]. Microfluidics and Nanofluidics, 2015, 19(1): 169-180.
[23] [23] VIKTOROV V, NIMAFAR M. A novel generation of 3D SAR-based passive micromixer: efficient mixing and low pressure drop at a low Reynolds number [J].Journal of Micromechanics and Microengineering, 2013, 23(5): 055023.
[24] [24] SADABADI H, PACKIRISAMY M, WUTHRICH R. Uniform integration of gold nanoparticles in PDMS microfluidics with 3D micromixing [J].Journal of Micromechanics and Microengineering, 2015, 25(9): 094006.
[25] [25] FRANZINI J B, FINNEMORE E J.Fluid mechanics with engineering applications [J]. 2003(1): 192-198.
[26] [26] RITTER P, OSORIO-NESME A, DELGADO A. 3D numerical simulations of passive mixing in a microchannel with nozzle-diffuser-like obstacles [J].International Journal of Heat and Mass Transfer, 2016, 101: 1075-1085.
[27] [27] ALAM A, KIM K Y. Analysis of mixing in a curved microchannel with rectangular grooves [J].Chemical Engineering Journal, 2012, 181-182: 708-716.
Get Citation
Copy Citation Text
LU Cong-da, XUE Hao, WU Hua-ping, FU Qiang, WEN Dong-hui. Mixing characteristics of passive-type micro-mixer with 3D-asymmetrical rhombus[J]. Optics and Precision Engineering, 2017, 25(9): 2377
Category:
Received: Mar. 15, 2017
Accepted: --
Published Online: Oct. 30, 2017
The Author Email: Cong-da LU (lcd@zjut.edu.cn)