[1] Siddiqui A A, Dubey A K. Recent trends in laser cladding and surface alloying[J]. Optics & Laser Technology, 134, 106619(2021).

[2] Tan C L, Weng F, Sui S et al. Progress and perspectives in laser additive manufacturing of key aeroengine materials[J]. International Journal of Machine Tools and Manufacture, 170, 103804(2021).

[3] Mahmoud E R I. Characterizations of 304 stainless steel laser cladded with titanium carbide particles[J]. Advances in Production Engineering & Management, 10, 115-124(2015).

[4] Yang J J, Wang Y, Li F Z et al. Weldability, microstructure and mechanical properties of laser-welded selective laser melted 304 stainless steel joints[J]. Journal of Materials Science & Technology, 35, 1817-1824(2019).

[5] Li D Y. Research of laser cladding high-entropy alloy coatings on 304 stainless steel surface[D], 11-12(2018).

[6] Wang G, Liu X B, Liu Y F et al. Microstructure and tribological properties of Co-Ti3SiC2 self-lubricating composite coatings on 304 stainless steel by laser cladding[J]. Journal of Materials Engineering, 49, 105-115(2021).

[7] Fang Z X, Qi W J, Li Z Q. Effect of laser cladding lap ratio of 304 stainless steel on microstructure, wear resistance and corrosion resistance of CoCrW coating[J]. Materials Reports, 35, 12123-12129(2021).

[8] Yang D, Ning Y H, Zhao Y G et al. Influence of processing parameter on microstructure, wear-resistance and corrosion-resistance of laser cladding Ni-based alloy on the surface of 304 stainless steel[J]. Materials Review, 31, 133-140(2017).

[9] Yi X B, Liu D X, Liang Z F et al. Microstructure and performance of laser-clad Fe60 alloy layer on stainless steel[J]. Heat Treatment, 32, 25-29(2017).

[10] Wang Q T, Zeng X B, Chen C R et al. Morphology, microstructure, and mechanical properties of Fe50-TiC composite laser cladding layer on Cr12 mold steel[J]. Laser & Optoelectronics Progress, 58, 0714002(2021).

[11] Li H Y, Wei L F, Wang Z M et al. Thermal fatigue properties of laser cladding Fe-based coating[J]. Laser & Optoelectronics Progress, 58, 0714003(2021).

[12] Cao J, Lu H F, Lu J Z et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding[J]. Chinese Journal of Lasers, 46, 0702001(2019).

[13] Duan X X, Gao S Y, Gu Y F et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding[J]. Chinese Journal of Lasers, 43, 0103004(2016).

[14] Zhou J Z, He W Y, Xu J L et al. Strengthening mechanism and wear resistance of Al2O3/Fe901 composite coating prepared by laser cladding[J]. Acta Optica Sinica, 39, 0514001(2019).

[15] Emamian A, Corbin S F, Khajepour A. Tribology characteristics of in-situ laser deposition of Fe-TiC[J]. Surface and Coatings Technology, 206, 4495-4501(2012).

[16] Jin M, He D Y, Wang Z J et al. Microstructure and properties of laser cladded 2205 dual-phase stainless steel/TiC composite coatings[J]. Laser & Optoelectronics Progress, 55, 111403(2018).

[17] Zhang Z H, Wang X, Zhang Q Q et al. Fabrication of Fe-based composite coatings reinforced by TiC particles and its microstructure and wear resistance of 40Cr gear steel by low energy pulsed laser cladding[J]. Optics & Laser Technology, 119, 105622(2019).

[18] Zhou D, Guo J S, Xiong D H et al. Effect of TiC content on the properties of Fe based coating by laser cladding[J]. Applied Laser, 41, 1189-1195(2021).

[19] Wang Q T, Zeng X B, Chen C R et al. An integrated method for multi-objective optimization of multi-pass Fe50/TiC laser cladding on AISI 1045 steel based on grey relational analysis and principal component analysis[J]. Coatings, 10, 151(2020).

[20] Emamian A, Corbin S F, Khajepour A. Effect of laser cladding process parameters on clad quality and in situ formed microstructure of Fe-TiC composite coatings[J]. Surface and Coatings Technology, 205, 2007-2015(2010).

[21] Khalili A, Mojtahedi M, Qaderi A et al. Effect of pulse laser parameters on the microstructure of the in situ Fe-TiC hard layer: simulation and experiment[J]. Optics & Laser Technology, 135, 106693(2021).

[22] Emamian A, Corbin S F, Khajepour A. The influence of combined laser parameters on in situ formed TiC morphology during laser cladding[J]. Surface and Coatings Technology, 206, 124-131(2011).

[23] Radhakrishnan M, Hassan M M, Long B E et al. Microstructures and properties of Ti/TiC composites fabricated by laser-directed energy deposition[J]. Additive Manufacturing, 46, 102198(2021).

[24] Chen Z X, Zhou H M, Xu C X. Cladding crack in laser cladding: a review[J]. Laser & Optoelectronics Progress, 58, 0700006(2021).

[25] Wang X L. Study on laser material deposition process of 3D-flow blade feature structures[D], 40-41(2019).

[26] Duan S Y, Zhan X H, Wu M Y et al. Analysis of elements non-uniform distribution of FeCoCrNi high-entropy alloy coatings on Ti-6Al-4V surface by laser cladding[J]. Metals and Materials International, 27, 467-480(2021).

[27] Šibalija T V, Majstorović V D[M]. Advanced multiresponse process optimisation(2016).