Optics and Precision Engineering, Volume. 17, Issue 6, 1300(2009)

Design and fabrication of floating electrode unidirectional SAW actuator

ZHANG Jun-feng1,*... LI Yi-gui1 and HUI Chun2 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    Surface Acoustic Wave(SAW) actuators have been dramatically required for a micro actuator not only due to their direct driving objects,low energy losses and drive errors,but also their higher work frequencies,shorter SAW waves,small dimensions,and low noises. In this paper,an applicable (SAW) micro actuator is implemented by fabricating microelectrodes on a LiNbO3 substrate and by using MEMS technologies.In order to control the drive direction more effectively,a new type of IDT,Floating Electrode Unidirectional Transducer (FEUDT) is developed and the optimal designs are proposed and compared with others by ANSYS. The dimensions of the FEUDT are 5 mm in the aperture size,80 μm in the pitch,6.7 μm in the strip width,and 0.8 μm in the thickness. In comparison with other types of SAW actuators,the floating electrode unidirectional SAW actuator has a higher frequency vibration near to 50 MHz and more effectively controllable drive direction ability,which will be very useful for micro optical controlling systems in microminiaturization and controllability.

    Tools

    Get Citation

    Copy Citation Text

    ZHANG Jun-feng, LI Yi-gui, HUI Chun. Design and fabrication of floating electrode unidirectional SAW actuator[J]. Optics and Precision Engineering, 2009, 17(6): 1300

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Jan. 20, 2009

    Accepted: --

    Published Online: Aug. 28, 2009

    The Author Email: Jun-feng ZHANG (gui-tar22@163.com)

    DOI:

    Topics