[1] Zang Q Y, Jin Y F, Zhang T et al. Effect of yttrium addition on microstructure, mechanical and corrosion properties of 20Cr13 martensitic stainless steel[J]. Journal of Iron and Steel Research International, 27, 451-460(2020).

[2] Hu X D, Yao J H, Kong F Z et al. Experiment and prediction model for 2Cr13 cladding using diode laser[J]. Chinese Journal of Lasers, 37, 277-280(2010).

[3] Zhang C, Li S, Qi L et al. Fabrication of NiTi alloy coating on 2Cr13 stainless steel by laser cladding[J]. Advanced Materials Research, 418/419/420, 242-245(2011).

[4] Bonagani S K, Bathula V, Kain V. Influence of tempering treatment on microstructure and pitting corrosion of 13 wt.% Cr martensitic stainless steel[J]. Corrosion Science, 131, 340-354(2018).

[5] Zhang X M, Niu G Y, Ma M Z. Effect of tempering temperature on microstructure and mechanical properties of 2Cr13 steel[J]. Transactions of Materials and Heat Treatment, 39, 46-51(2018).

[6] Hamed A A, Tabakoff W, Rivir R B et al. Turbine blade surface deterioration by erosion[J]. Journal of Turbomachinery, 127, 445-452(2005).

[7] Ge J G, Lin J, Long Y H et al. Microstructural evolution and mechanical characterization of wire arc additively manufactured 2Cr13 thin-wall part[J]. Journal of Materials Research and Technology, 13, 1767-1778(2021).

[8] Li F Y, Qi X X, Li Y L et al. Review on repair technologies for key part remanufacturing of shield machines[J]. China Mechanical Engineering, 32, 820-831(2021).

[9] Li Y, He Y Y, Zhu Y J et al. Active screen plasma nitriding of 2Cr13 martensitic stainless steel[J]. Heat Treatment of Metals, 42, 163-167(2017).

[10] Lv H P, Nie P L, Yan Y G et al. Characterization and adhesion strength study of detonation-sprayed MoB-CoCr alloy coatings on 2Cr13 stainless steel substrate[J]. Journal of Coatings Technology and Research, 7, 801-807(2010).

[11] Wang H F, Wang G H, Cui R X. Influence of the TiN film layer on the anti-erosion performance of the 2Cr13 stainless steel blade[J]. China Petroleum Machinery, 37, 26-29, 97(2009).

[12] Tian Z H, Zhao Y T, Jiang Y J et al. Microstructure and properties of Inconel 625+WC composite coatings prepared by laser cladding[J]. Rare Metals, 40, 2281-2291(2021).

[13] He B F, Fu F X, Xie Y X et al. Performance of 2Cr13 stainless steel laser cladding coating[J]. Hot Working Technology, 47, 108-111(2018).

[14] Li J J, Ju J, Chang W W et al. Investigation on the microstructure and wear behavior of laser-cladded high aluminum and chromium Fe-B-C coating[J]. Materials, 13, 2443(2020).

[15] Zhou Z J, Xu L, Du Y B et al. Microstructure and Properties of Laser Cladding Fe/Ni Base Alloy Coating on 20Cr13 Surface Steel[J]. Journal of Chongqing Technology and Business University (Natural Science Edition), 38, 69-74(2021).

[16] Wang Y P, Chen Z G, Wang L et al. Effects of laser specific energy on microstructure and properties of Fe2B laser cladding coating[J]. China Surface Engineering, 33, 117-124(2020).

[17] Liu Z W, Zhao K, Hao Y B et al. Microstructures and tensile properties of 15-5PH precipitation hardening stainless steel fabricated by laser melting deposition[J]. Aerospace Shanghai (Chinese & English), 38, 150-156(2021).

[18] Dong S Y, Ma Y Z, Xu B S et al. Current status of material for laser cladding[J]. Materials Review, 20, 5-9, 13(2006).

[19] Chen J F, Li X P, Xue Y P. Friction and wear properties of laser cladding Fe901 alloy coating on 45 steel surface[J]. Chinese Journal of Lasers, 46, 0502001(2019).

[20] Zong L, Li R G, Zhang X L. Microstructure and wear resistance of Fe-Ti-V-C hardfacing alloys by laser cladding[J]. Journal of Mechanical Engineering, 53, 67-73(2017).

[21] Lu Y Z, Huang G K, Wang Y Z et al. Crack-free Fe-based amorphous coating synthesized by laser cladding[J]. Materials Letters, 210, 46-50(2018).

[22] Li G S, Li J H, Feng W L et al. Effects of Specific Powder and Specific Energy on the Characteristics of NiWC25 by Laser Cladding[J]. SURFACE TECHNOLOGY, 48, 253-258(2019).

[23] Khorram A, Taheri M, Fasahat M. Laser cladding of Inconel 713 LC with Stellite 31 powder: statistical modeling and optimization[J]. Laser Physics, 31, 096001(2021).

[24] Pang X T, Yao C W, Gong Q F et al. Influence of multilayer laser cladding on the microstructure and properties of 30CrMnSiNi2A steel substrate[J]. Chinese Journal of Lasers, 48, 0602104(2021).

[25] Zhao W, Zhang K, Liu P et al. Study on microstructure and properties of laser cladding Ni-based WC composite coating[J]. Journal of Functional Materials, 50, 1098-1103, 1109(2019).

[26] Zhang R L, Tu X H. Variational mode decomposition and wavelet threshold function de-noising for second harmonics[J]. Acta Optica Sinica, 42, 0210001(2022).

[27] Li C, Wang Y L, Jiang F L et al. Effect of laser power on mechanical properties of ultrasonic assisted laser clad Al2O3-ZrO2 ceramic[J]. Heat Treatment of Metals, 45, 218-224(2020).

[28] Du Y B, Zhou Z J, Xu L et al. Laser cladding process parameter optimization method based on grey relational analysis and ACDE algorithm[J]. Computer Integrated Manufacturing Systems, 28, 149-160(2022).

[29] Zhao K, Liang X D, Wang W et al. Multi-objective optimization of coaxial powder feeding laser cladding based on NSGA-Ⅱ[J]. Chinese Journal of Lasers, 47, 0102004(2020).

[30] Yu T B, Yang L, Zhao Y et al. Experimental research and multi-response multi-parameter optimization of laser cladding Fe313[J]. Optics & Laser Technology, 108, 321-332(2018).

[31] Xu Q D, Lin X, Song M H et al. Microstructure of heat-affected zone of laser forming repaired 2cr13 stainless steel[J]. Acta Metallurgica Sinica, 49, 605-613(2013).

[32] Xu Y F, Sun Y N, Wang G J et al. Microstructure and properties of iron-based alloys coatings prepared by high-speed laser cladding[J]. Chinese Journal of Lasers, 48, 1002122(2021).

[33] Guo W, Li K K, Chai R X et al. Influence of the scanning sequence on microstructure and mechanical property of 304 steel by laser cladding[J]. Laser & Infrared, 48, 1087-1093(2018).

[34] Ge Y Q, Wang W X. Microstructure and wear resistance of laser clad Ni60 alloy on AZ31B magnesium alloy in different laser power[J]. China Surface Engineering, 25, 45-50(2012).