[1] [1] COBLE RL. Transparent alumina and method of preparation[P]. US Patent, 3026210 1962-03-10.

[2] [2] LU Bin, ZHAO Guijie. Mater Rev, 2005, 19(8): 20-24.

[3] [3] IKESUE A, KINOSHITA T, KAMATA K, et al. Fabrication and optical properties of high-performance polycrystalline Nd: YAG ceramics for solid-state lasers[J]. J Am Ceram Soc, 1995, 78(4): 1033-1040.

[4] [4] GOLDSTEIN A, KRELL A. Transparent ceramics at 50: progress made and further prospects[J]. J Am Ceram Soc, 2016, 99(10): 3173-3197.

[5] [5] JI T, WANG T, LI H, et al. Ce3+-doped yttrium aluminum garnet transparent ceramics for high-resolution X-ray imaging[J]. Adv Opt Mater, 2022, 10(6): 2102056.

[6] [6] CHEN Lan, XIA Yudong, YU Shengquan, et al. China Ceramics, 2022, 58(5): 16-26.

[7] [7] BETTES B, XIE Y. Synthesis and pressing of transparent polycrystalline doped yttrium aluminum garnet: A review[J]. Mater Res Lett, 2023, 11(1): 1-20.

[8] [8] KAI C C. Three-dimensional rapid prototyping technologies and key development areas[J]. Comput Contr Eng J, 1994, 5(4): 200-206.

[9] [9] LEE H D, POBER R L, CALVERT P D, et al. Photopolymerizable binders for ceramics[J]. J Mater Sci Lett, 1986, 5(1): 81-83.

[10] [10] SONG X, CHEN Y, LEE T W, et al. Ceramic fabrication using mask-image-projection-based stereolithography integrated with tape-casting[J]. J Manuf Process, 2015, 20: 456-464.

[11] [11] GMEINER R, MITTERAMSKOGLER G, STAMPFL J, et al. Stereolithographic ceramic manufacturing of high strength bioactive glass[J]. Int J Appl Ceram Technol, 2015, 12(1): 38-45.

[12] [12] SCHWENTENWEIN M, HOMA J. Additive manufacturing of dense alumina ceramics[J]. Int J Appl Ceram Technol, 2015, 12(1): 1-7.

[13] [13] SCHLACHER J, LUBE T, HARRER W, et al. Strength of additive manufactured alumina[J]. J Eur Ceram Soc, 2020, 40(14): 4737-4745.

[14] [14] SHEN Y R, SUN Y, JIN B C, et al. Effect of debinding and sintering profile on the optical properties of DLP-3D printed YAG transparent ceramic[J]. Ceram Int, 2022, 48(15): 21134-21140.

[15] [15] ZHANG G R, WU Y Q. Three-dimensional printing of transparent ceramics by lithography-based digital projection[J]. Addit Manuf, 2021, 47: 102271.

[16] [16] JING W, YU S Q, JI X B, et al. Preparation of a Φ60 mm Nd: YAG transparent ceramic disk[J]. Ceram Int, 2017, 43(6): 5334-5337.

[17] [17] KNAPP A M, HALLORAN J W. Binder removal from ceramic-filled thermoplastic blends[J]. J Am Ceram Soc, 2006, 89(9): 2776-2781.

[18] [18] DANG M T, HU S, ZHOU G H, et al. 3D printing of alumina ceramic heat sink with mini-channels for thermal management[J]. Int J Appl Ceram Technol, 2023, 20(3): 1371-1377.

[19] [19] YANG H, QIN X P, WANG S W, et al. Fabrication and optical properties of a highly transparent Nd: YAG ceramic[J]. Rare Met, 2010, 29(5): 524-527.

[20] [20] ZHANG W, LU T C, WEI N, et al. Assessment of light scattering by pores in Nd: YAG transparent ceramics[J]. J Alloys Compd, 2012, 520: 36-41.