Bulletin of the Chinese Ceramic Society, Volume. 42, Issue 10, 3579(2023)

Research Progress on Reaction Mechanism and Mechanical Properties of Aluminosilicate Phosphate Geopolymers

HE Min1...2,3, YANG Zongbao1,2, LI Zhaochao1,2, OU Zhihua1,2, OU Manli1,2 and YANG Tony3 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(74)

    [4] [4] DAVIDOVITS J. Synthesis of new high-temperature geo-polymers for reinforced plastic/composites[C]. PACTEC 79 Society of Plastics Engineers, 1979: 151-154.

    [5] [5] ZHAO J H, TONG L Y, LI B E, et al. Eco-friendly geopolymer materials: a review of performance improvement, potential application and sustainability assessment[J]. Journal of Cleaner Production, 2021, 307: 127085.

    [6] [6] MAJDOUBI H, MAKHLOUF R, HADDAJI Y, et al. Valorization of phosphogypsum waste through acid geopolymer technology: synthesis, characterization, and environmental assessment[J]. Construction and Building Materials, 2023, 371: 130710.

    [7] [7] MARSH A, HEATH A, PATUREAU P, et al. Alkali activation behaviour of un-calcined montmorillonite and illite clay minerals[J]. Applied Clay Science, 2018, 166: 250-261.

    [8] [8] SEDMALE G, RANDERS M, RUNDANS M, et al. Application of differently treated illite and illite clay samples for the development of ceramics[J]. Applied Clay Science, 2017, 146: 397-403.

    [9] [9] BERNASCONI D, VIANI A, ZRYBNICK L, et al. Phosphate-based geopolymer: influence of municipal solid waste fly ash introduction on structure and compressive strength[J]. Ceramics International, 2023, 49(13): 22149-22159.

    [10] [10] SASUI S S, KIM G, NAM J, et al. Strength and microstructure of class-C fly ash and GGBS blend geopolymer activated in NaOH&NaOH+Na2SiO3[J]. Materials, 2019, 13(1): 59.

    [11] [11] DJOBO J, STEPHAN D, ELIMBI A. Setting and hardening behavior of volcanic ash phosphate cement[J]. Journal of Building Engineering, 2020, 31: 101427.

    [12] [12] KUMAR P K, SRINIVASU K. Influence of GGBS and concentration of sodium hydroxide on strength behavior of geopolymer mortar[J]. Materials Today: Proceedings, 2022, 65: 702-706.

    [13] [13] ZULKIFLY K, HEAH C Y, LIEW Y M, et al. Effect of phosphate addition on room-temperature-cured fly ash-metakaolin blend geopolymers[J]. Construction and Building Materials, 2021, 270: 121486.

    [14] [14] WANG Y S, ALREFAEI Y, DAI J G. Influence of coal fly ash on the early performance enhancement and formation mechanisms of silico-aluminophosphate geopolymer[J]. Cement and Concrete Research, 2020, 127: 105932.

    [15] [15] MA S, ZHANG Z, LIU X. Comprehensive understanding of aluminosilicate phosphate geopolymers: a critical review[J]. Materials, 2022, 15(17): 5961.

    [16] [16] DAVIDOVITS J. Geopolymers[J]. Journal of Thermal Analysis, 1991, 37(8): 1633-1656.

    [17] [17] KHALE D, CHAUDHARY R. Mechanism of geopolymerization and factors influencing its development: a review[J]. Journal of Materials Science, 2007, 42(3): 729-746.

    [18] [18] YAO X, ZHANG Z H, ZHU H J, et al. Geopolymerization process of alkali-metakaolinite characterized by isothermal calorimetry[J]. Thermochimica Acta, 2009, 493(1/2): 49-54.

    [19] [19] MUIZ-VILLARREAL M S, MANZANO-RAMREZ A, SAMPIERI-BULBARELA S, et al. The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer[J]. Materials Letters, 2011, 65(6): 995-998.

    [20] [20] KUMAR A, KUMAR S. Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization[J]. Construction and Building Materials, 2013, 38: 865-871.

    [21] [21] DAVIDOVITS J. Geopolymers and geopolymeric materials[J]. Journal of Thermal Analysis, 1989, 35(2): 429-441.

    [22] [22] NATH S K, MUKHERJEE S, MAITRA S, et al. Ambient and elevated temperature geopolymerization behaviour of class F fly ash[J]. Transactions of the Indian Ceramic Society, 2014, 73(2): 126-132.

    [23] [23] BAJPAI R, CHOUDHARY K, SRIVASTAVA A, et al. Environmental impact assessment of fly ash and silica fume based geopolymer concrete[J]. Journal of Cleaner Production, 2020, 254: 120147.

    [24] [24] GAO L, ZHENG Y X, TANG Y, et al. Effect of phosphoric acid content on the microstructure and compressive strength of phosphoric acid-based metakaolin geopolymers[J]. Heliyon, 2020, 6(4): e03853.

    [25] [25] KHABBOUCHI M, HOSNI K, MEZNI M, et al. Interaction of metakaolin-phosphoric acid and their structural evolution at high temperature[J]. Applied Clay Science, 2017, 146: 510-516.

    [26] [26] RAVEN K P, LOEPPERT R H. Microwave digestion of fertilizers and soil amendments[J]. Communications in Soil Science and Plant Analysis, 1996, 27(18/19/20): 2947-2971.

    [27] [27] BARTOS J M, MULLINS G L, SIKORA F J, et al. Availability of phosphorus in the water-insoluble fraction of monoammonium phosphate fertilizers[J]. Soil Science Society of America Journal, 1991, 55(2): 539-543.

    [28] [28] WAGH A S. Chemically bonded phosphate ceramics-a novel class of geopolymers[C]//Advances in Ceramic Matrix Composites X: Proceedings of the 106th Annual Meeting of the American Ceramic Society. Indiana: Ceramic Transactions, 2004: 107.

    [29] [29] PU S Y, ZHU Z D, SONG W L, et al. Mechanical and microscopic properties of fly ash phosphoric acid-based geopolymer paste: a comprehensive study[J]. Construction and Building Materials, 2021, 299: 123947.

    [30] [30] DJOBO J N Y, NKWAJU R Y. Preparation of acid aluminum phosphate solutions for metakaolin phosphate geopolymer binder[J]. RSC Advances, 2021, 11(51): 32258-32268.

    [31] [31] GUO C M, WANG K T, LIU M Y, et al. Preparation and characterization of acid-based geopolymer using metakaolin and disused polishing liquid[J]. Ceramics International, 2016, 42(7): 9287-9291.

    [35] [35] LOUATI S, BAKLOUTI S, SAMET B. Acid based geopolymerization kinetics: effect of clay particle size[J]. Applied Clay Science, 2016, 132/133: 571-578.

    [36] [36] ZRIBI M, BAKLOUTI S. Investigation of phosphate based geopolymers formation mechanism[J]. Journal of Non-Crystalline Solids, 2021, 562: 120777.

    [37] [37] TCHAKOUT H K, RSCHER C H, KAMSEU E, et al. The influence of gibbsite in kaolin and the formation of berlinite on the properties of metakaolin-phosphate-based geopolymer cements[J]. Materials Chemistry and Physics, 2017, 199: 280-288.

    [38] [38] TCHAKOUT H K, RSCHER C H. Mechanical and microstructural properties of metakaolin-based geopolymer cements from sodium waterglass and phosphoric acid solution as hardeners: a comparative study[J]. Applied Clay Science, 2017, 140: 81-87.

    [39] [39] DOUIRI H, LOUATI S, BAKLOUTI S, et al. Structural, thermal and dielectric properties of phosphoric acid-based geopolymers with different amounts of H3PO4[J]. Materials Letters, 2014, 116: 9-12.

    [40] [40] TCHAKOUT H K, RSCHER C H, KAMSEU E, et al. Influence of the molar concentration of phosphoric acid solution on the properties of metakaolin-phosphate-based geopolymer cements[J]. Applied Clay Science, 2017, 147: 184-194.

    [41] [41] MORSY M S, RASHAD A M, SHOUKRY H, et al. Potential use of limestone in metakaolin-based geopolymer activated with H3PO4 for thermal insulation[J]. Construction and Building Materials, 2019, 229: 117088.

    [42] [42] LOUATI S, BAKLOUTI S, SAMET B. Geopolymers based on phosphoric acid and illito-kaolinitic clay[J]. Advances in Materials Science and Engineering, 2016, 2016: 1-7.

    [43] [43] MATHIVET V, JOUIN J, GHARZOUNI A, et al. Acid-based geopolymers: understanding of the structural evolutions during consolidation and after thermal treatments[J]. Journal of Non-Crystalline Solids, 2019, 512: 90-97.

    [44] [44] WANG Y S, DAI J G, DING Z, et al. Phosphate-based geopolymer: formation mechanism and thermal stability[J]. Materials Letters, 2017, 190: 209-212.

    [45] [45] PERERA D S, HANNA J V, DAVIS J, et al. Relative strengths of phosphoric acid-reacted and alkali-reacted metakaolin materials[J]. Journal of Materials Science, 2008, 43(19): 6562-6566.

    [46] [46] LIN H, LIU H, LI Y, et al. Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures[J]. Cement and Concrete Research, 2021, 144: 106425.

    [47] [47] DONG T, XIE S B, WANG J S, et al. Properties and characterization of a metakaolin phosphate acid-based geopolymer synthesized in a humid environment[J]. Journal of the Australian Ceramic Society, 2020, 56(1): 175-184.

    [48] [48] CELERIER H, JOUIN J, TESSIER-DOYEN N, et al. Influence of various metakaolin raw materials on the water and fire resistance of geopolymers prepared in phosphoric acid[J]. Journal of Non-Crystalline Solids, 2018, 500: 493-501.

    [49] [49] GUO H Z, YUAN P, ZHANG B F, et al. Realization of high-percentage addition of fly ash in the materials for the preparation of geopolymer derived from acid-activated metakaolin[J]. Journal of Cleaner Production, 2021, 285: 125430.

    [50] [50] KATSIKI A, HERTEL T, TYSMANS T, et al. Metakaolinite phosphate cementitious matrix: inorganic polymer obtained by acidic activation[J]. Materials, 2019, 12(3): 442.

    [52] [52] WANG Y S, PROVIS J L, DAI J G. Role of soluble aluminum species in the activating solution for synthesis of silico-aluminophosphate geopolymers[J]. Cement and Concrete Composites, 2018, 93: 186-195.

    [53] [53] ZRIBI M, SAMET B, BAKLOUTI S. Effect of curing temperature on the synthesis, structure and mechanical properties of phosphate-based geopolymers[J]. Journal of Non-Crystalline Solids, 2019, 511: 62-67.

    [54] [54] BEWA C N, TCHAKOUT H K, BANENZOU C, et al. Acid-based geopolymers using waste fired brick and different metakaolins as raw materials[J]. Applied Clay Science, 2020, 198: 105813.

    [55] [55] ZHANG B F, GUO H Z, DENG L L, et al. Undehydrated kaolinite as materials for the preparation of geopolymer through phosphoric acid-activation[J]. Applied Clay Science, 2020, 199: 105887.

    [56] [56] HE Y, LIU L P, HE L P, et al. Characterization of chemosynthetic H3PO4-Al2O3-2SiO2 geopolymers[J]. Ceramics International, 2016, 42(9): 10908-10912.

    [57] [57] BEWA C N, TCHAKOUT H K, RSCHER C H, et al. Influence of the curing temperature on the properties of poly(phospho-ferro-siloxo) networks from laterite[J]. SN Applied Sciences, 2019, 1(8): 1-12.

    [58] [58] POUGNONG T E, BELIBI P D B, BAENLA J, et al. Effects of chemical composition of amorphous phase on the reactivity of phosphoric acid activation of volcanic ashes[J]. Journal of Non-Crystalline Solids, 2022, 575: 121213.

    [59] [59] MAHYAR M, ERDOAN S T. Phosphate-activated high-calcium fly ash acid-base cements[J]. Cement and Concrete Composites, 2015, 63: 96-103.

    [60] [60] HE M, YANG Z B, LI N, et al. Strength, microstructure, CO2 emission and economic analyses of low concentration phosphoric acid-activated fly ash geopolymer[J]. Construction and Building Materials, 2023, 374: 130920.

    [61] [61] PU S Y, ZHU Z D, SONG W L, et al. A eco-friendly acid fly ash geopolymer with a higher strength[J]. Construction and Building Materials, 2022, 335: 127450.

    [62] [62] WANG Y S, ALREFAEI Y, DAI J G. Improvement of early-age properties of silico-aluminophosphate geopolymer using dead burnt magnesia[J]. Construction and Building Materials, 2019, 217: 1-11.

    [63] [63] CELERIER H, JOUIN J, MATHIVET V, et al. Composition and properties of phosphoric acid-based geopolymers[J]. Journal of Non-Crystalline Solids, 2018, 493: 94-98.

    [64] [64] ZAHID M, SHAFIQ N, NURUDDIN M F, et al. Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar[J]. Key Engineering Materials, 2017, 744: 131-135.

    [65] [65] ZHANG B F, GUO H Z, YUAN P, et al. Novel acid-based geopolymer synthesized from nanosized tubular halloysite: the role of precalcination temperature and phosphoric acid concentration[J]. Cement and Concrete Composites, 2020, 110: 103601.

    [66] [66] WANG M R, JIA D C, HE P G, et al. Influence of calcination temperature of kaolin on the structure and properties of final geopolymer[J]. Materials Letters, 2010, 64(22): 2551-2554.

    [67] [67] DEROUICHE R, BAKLOUTI S. Phosphoric acid based geopolymerization: effect of the mechanochemical and the thermal activation of the kaolin[J]. Ceramics International, 2021, 47(10): 13446-13456.

    [70] [70] MATHIVET V, JOUIN J, PARLIER M, et al. Control of the alumino-silico-phosphate geopolymers properties and structures by the phosphorus concentration[J]. Materials Chemistry and Physics, 2021, 258: 123867.

    [71] [71] ZRIBI M, SAMET B, BAKLOUTI S. Mechanical, microstructural and structural investigation of phosphate-based geopolymers with respect to P/Al molar ratio[J]. Journal of Solid State Chemistry, 2020, 281: 121025.

    [72] [72] LOUATI S, HAJJAJI W, BAKLOUTI S, et al. Structure and properties of new eco-material obtained by phosphoric acid attack of natural Tunisian clay[J]. Applied Clay Science, 2014, 101: 60-67.

    [77] [77] KAZE C R, LECOMTE-NANA G L, KAMSEU E, et al. Mechanical and physical properties of inorganic polymer cement made of iron-rich laterite and lateritic clay: a comparative study[J]. Cement and Concrete Research, 2021, 140: 106320.

    [78] [78] DJOBO J N Y, STEPHAN D. The reaction of calcium during the formation of metakaolin phosphate geopolymer binder[J]. Cement and Concrete Research, 2022, 158: 106840.

    [79] [79] LI J C, SUN Z G, WANG L, et al. Properties and mechanism of high-magnesium nickel slag-fly ash based geopolymer activated by phosphoric acid[J]. Construction and Building Materials, 2022, 345: 128256.

    [80] [80] WAGH A S, JEONG S Y. Chemically bonded phosphate ceramics: I, a dissolution model of formation[J]. Journal of the American Ceramic Society, 2003, 86(11): 1838-1844.

    [81] [81] CHERKI EL IDRISSI A, ROZIERE E, LOUKILI A, et al. Design of geopolymer grouts: the effects of water content and mineral precursor[J]. European Journal of Environmental and Civil Engineering, 2018, 22(5): 628-649.

    [82] [82] NG Y S, LIEW Y M, HEAH C Y, et al. Improvements of flexural properties and thermal performance in thin geopolymer based on fly ash and ladle furnace slag using borax decahydrates[J]. Materials, 2022, 15(12): 4178.

    [83] [83] LIU H J, SANJAYAN J G, BU Y H. The application of sodium hydroxide and anhydrous borax as composite activator of class F fly ash for extending setting time[J]. Fuel, 2017, 206: 534-540.

    [84] [84] NUAKLONG P, JANPRASIT K, JONGVIVATSAKUL P. Enhancement of strengths of high-calcium fly ash geopolymer containing borax with rice husk ash[J]. Journal of Building Engineering, 2021, 40: 102762.

    [86] [86] YU C Q, YU Y R, ZHAO Y M, et al. Mechanical properties and in situ fracture behavior of SiO2f/phosphate geopolymer composites[J]. Rare Metals, 2020, 39(5): 562-569.

    [87] [87] HE P G, JIA L Y, MA G R, et al. Effects of fiber contents on the mechanical and microwave absorbent properties of carbon fiber felt reinforced geopolymer composites[J]. Ceramics International, 2018, 44(9): 10726-10734.

    [88] [88] DING Z, LU C, CUI P, et al. Primal study on mechanical properties of phosphate based geopolymer[J]. Key Engineering Materials, 2017, 726: 490-494.

    Tools

    Get Citation

    Copy Citation Text

    HE Min, YANG Zongbao, LI Zhaochao, OU Zhihua, OU Manli, YANG Tony. Research Progress on Reaction Mechanism and Mechanical Properties of Aluminosilicate Phosphate Geopolymers[J]. Bulletin of the Chinese Ceramic Society, 2023, 42(10): 3579

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Jun. 7, 2023

    Accepted: --

    Published Online: Oct. 29, 2023

    The Author Email:

    DOI:

    CSTR:32186.14.

    Topics