Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 1, 302(2024)

Evolution and Mechanism of Friction and Wear Properties of Silicon Nitride Ceramics at High Temperature

LIU Wenjin1... ZHOU Guoxiang1,2, YANG Zhihua1,2,* and JIA Dechang1 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    References(21)

    [1] [1] KHADER I, RENZ A, KAILER A. A wear model for silicon nitride in dry sliding contact against a nickel-base alloy[J]. Wear, 2017, 376/377: 352-362.

    [2] [2] PAN B, NI Q, YIN B, et al. Preparation and properties of mullite-Si3N4/SiC composite ceramic[J]. Journal of the Chinese Ceramic Society, 2016, 44(9): 1259-1264 (in Chinese).

    [3] [3] ZHOU W, MA J, GAO X Q, et al. Effect of high-temperature oxidation on phase structure and flexural strength of Si3N4-SiC ceramics[J]. Journal of the Chinese Ceramic Society, 2022, 50(8): 2104-2109 (in Chinese).

    [4] [4] REIS P, DAVIM J P, XU X, et al. Friction and wear behaviour of β-silicon nitride-steel couples under unlubricated conditions[J]. Materials Science and Technology, 2006, 22(2): 247-252.

    [5] [5] LI S H, SUI Y H, SUN J, et al. Analysis on friction and wear characteristics and transfer film formation mechanism of Si3N4/PTFE under dry friction condition[J]. Lubrication Engineering, 2022, 47(1): 53-59 (in Chinese).

    [6] [6] KRBATA M, ECKERT M, MAJERIK J, et al. Wear behaviour of high strength tool steel 90MnCrV8 in contact with Si3N4[J]. Metals, 2020, 10(6): 756.

    [7] [7] LIU X B, LIU H Q, LIU Y F, et al. Effects of temperature and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating[J]. Composites Part B: Engineering, 2013, 53: 347-354.

    [8] [8] ZHAN C T, WU L X, NIU W B, et al. Preparation and properties of sintered reaction-bonded Si3N4 ceramics by gas pressure sintering with ZrO2-MgO-Y2O3 additive[J]. Journal of Functional Materials, 2019, 50(12): 12108-12112 (in Chinese).

    [9] [9] FAN S W, XU Y D, ZHANG L T, et al. Preparation and tribological properties of C/SiC friction materials[J]. Journal of Inorganic Materials, 2006, 21(4): 927-934 (in Chinese).

    [10] [10] ZHAO Y J, ZHANG Y J, GONG H Y, et al. Effects of Y2O3-MgO nanopowders content on mechanical and dielectric properties of porous BN/Si3N4 composites[J]. Ceramics International, 2015, 41(3): 3618-3623.

    [11] [11] LIU W, TONG W X, HE R X, et al. Effect of the Y2O3 additive concentration on the properties of a silicon nitride ceramic substrate[J]. Ceramics International, 2016, 42(16): 18641-18647.

    [12] [12] CHEN Y J, LI Q, JIANG D Y. Corrosion study of silicon nitride ceramics in molten salt[J]. Advanced Ceramics, 2010, 31(3): 3-7 (in Chinese).

    [13] [13] TAN D W, ZHU L L, WEI W X, et al. Performance improvement of Si3N4 ceramic cutting tools by tailoring of phase composition and microstructure[J]. Ceramics International, 2020, 46(16): 26182-26189.

    [14] [14] ZHOU F, CHEN K M, WANG M L, et al. Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air[J]. Wear, 2008, 265(7/8): 1029-1037.

    [15] [15] HUANG L, DAI Q W, HUANG W, et al. Ni/Si3N4 composite coatings and their water lubrication behaviors[J]. Applied Surface Science, 2022, 572: 151534.

    [16] [16] ZHANG C X. Preparation and properties of β-silicon nitride whisker reinforced aluminum matrix composites[D]. Shanghai: Shanghai Institute of Ceramics, Chinese Academy of Sciences, 2019 (in Chinese).

    [17] [17] WANG W S. Study on steam corrosion and high temperature friction and wear properties of Ti2AlN thin films[D]. Xi’an: Xi’an University of Technology, 2020 (in Chinese).

    [18] [18] KASEM H, BONNAMY S, BERTHIER Y, et al. Characterization of surface grooves and scratches induced by friction of C/C composites at low and high temperatures[J]. Tribology International, 2010, 43(11): 1951-1959.

    [19] [19] HUA N B, CHEN W Z, WANG W G, et al. Tribological behavior of a Ni-free Zr-based bulk metallic glass with potential for biomedical applications[J]. Materials Science and Engineering: C, 2016, 66: 268-277.

    [20] [20] CUI G J, LIU Y P, GAO G J, et al. Microstructure and high-temperature wear performance of FeCr matrix self-lubricating composites from room temperature to 800 ℃[J]. Materials, 2019, 13(1): 51.

    [21] [21] HARDELL J, PRAKASH B. High-temperature friction and wear behaviour of different tool steels during sliding against Al-Si-coated high-strength steel[J]. Tribology International, 2008, 41(7): 663-671.

    Tools

    Get Citation

    Copy Citation Text

    LIU Wenjin, ZHOU Guoxiang, YANG Zhihua, JIA Dechang. Evolution and Mechanism of Friction and Wear Properties of Silicon Nitride Ceramics at High Temperature[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(1): 302

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: May. 22, 2023

    Accepted: --

    Published Online: Jul. 29, 2024

    The Author Email: Zhihua YANG (zhyang@hit.edu.cn)

    DOI:

    CSTR:32186.14.

    Topics