International Journal of Extreme Manufacturing, Volume. 6, Issue 2, 25003(2024)

Isotropic sintering shrinkage of 3D glass-ceramic nanolattices: backbone preforming and mechanical enhancement

Nianyao Chai1...2,3, Yunfan Yue1,3, Xiangyu Chen1, Zhongle Zeng1,2, Sheng Li1,2, and Xuewen Wang14,* |Show fewer author(s)
Author Affiliations
  • 1Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, People’s Republic of China
  • 2International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, People’s Republic of China
  • 3These authors contributed equally (Nianyao Chai and Yunfan Yue).
  • 4National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies, Foshan Xianhu Laboratory, Foshan 528000, People’s Republic of China
  • show less
    References(49)

    [1] [1] Meza L R, Das S and Greer J R 2014 Strong, lightweight, and recoverable three-dimensional ceramic nanolattices Science 345 1322–6

    [2] [2] Tan H W, Choong Y Y C, Kuo C N, Low H Y and Chua C K 2022 3D printed electronics: processes, materials and future trends Prog. Mater. Sci. 127 100945

    [3] [3] Eckel Z C, Zhou C Y, Martin J H, Jacobsen A J, Carter W B and Schaedler T A 2016 Additive manufacturing of polymer-derived ceramics Science 351 58–62

    [4] [4] Kotz F, Arnold K, Bauer W, Schild D, Keller N,Sachsenheimer K, Nargang T M, Richter C, Helmer D and Rapp B E 2017 Three-dimensional printing of transparent fused silica glass Nature 544 337–9

    [5] [5] Zhang X, Vyatskikh A, Gao H J, Greer J R and Li X Y 2019 Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon Proc. Natl Acad. Sci. USA 116 6665–72

    [6] [6] Chen J, Hu S S, Zhu S N and Li T 2023 Metamaterials: from fundamental physics to intelligent design Interdiscip. Mater.2 5–29

    [7] [7] Luo W J, Yan S and Zhou J 2022 Ceramic-based dielectric metamaterials Interdiscip. Mater. 1 11–27

    [8] [8] Ma Y B, Zhang B Q, Zhang X Y and Zhou Y H 2023 Controllable rectification on the thermal conductivity of porous YBa2Cu3O7?x superconductors from 3D-printing Int. J. Extrem. Manuf. 5 015001

    [9] [9] Smith T M, Kantzos C A, Zarkevich N A, Harder B J,Heczko M, Gradl P R, Thompson A C, Mills M J, Gabb T P and Lawson J W 2023 A 3D printable alloy designed for extreme environments Nature 617 513–8

    [10] [10] Chaudhary R P, Parameswaran C, Idrees M, Rasaki A S,Liu C Y, Chen Z W and Colombo P 2022 Additive manufacturing of polymer-derived ceramics: materials,technologies, properties and potential applications Prog.Mater. Sci. 128 100969

    [11] [11] Bauer J, Schroer A, Schwaiger R and Kraft O 2016 Approaching theoretical strength in glassy carbon nanolattices Nat. Mater. 15 438–43

    [12] [12] Vyatskikh A, Delalande S, Kudo A, Zhang X, Portela C M and Greer J R 2018 Additive manufacturing of 3D nano-architected metals Nat. Commun. 9 593

    [13] [13] Brigo L, Schmidt J E M, Gandin A, Michieli N, Colombo P and Brusatin G 2018 3D nanofabrication of SiOC ceramic structures Adv. Sci. 5 1800937

    [14] [14] Schmid M, Ludescher D and Giessen H 2019 Optical properties of photoresists for femtosecond 3D printing: refractive index, extinction, luminescence-dose dependence,aging, heat treatment and comparison between 1-photon and 2-photon exposure Opt. Mater. Express 9 4564–77

    [15] [15] Jin F, Liu J, Zhao Y Y, Dong X Z, Zheng M L and Duan X M 2022 λ/30 inorganic features achieved by multi-photon 3D lithography Nat. Commun. 13 1357

    [16] [16] Mueller P et al 2017 Molecular switch for sub-diffraction laser lithography by photoenol intermediate-state cis–trans isomerization ACS Nano 11 6396–403

    [17] [17] Kawata S, Sun H B, Tanaka T and Takada K 2001 Finer features for functional microdevices Nature 412 697–8

    [18] [18] Wu L X, Meng L, Wang Y Y, Lv M, Ouyang T Y, Wang Y L and Zeng X Y 2023 Fabrication of polyetheretherketone (PEEK)-based 3D electronics with fine resolution by a hydrophobic treatment assisted hybrid additive manufacturing method Int. J. Extrem. Manuf. 5 035003

    [19] [19] Zhang Z H et al 2022 Passive deicing CFRP surfaces enabled by super-hydrophobic multi-scale micro-nano structures fabricated via femtosecond laser direct writing Nanomaterials 12 2782

    [20] [20] Wang X W et al 2017 Laser-induced translative hydrodynamic mass snapshots: noninvasive characterization and predictive modeling via mapping at nanoscale Phys. Rev. Appl.8 044016

    [21] [21] Xu R, Chen C Q, Sun J P, He Y L, Li X, Lu M H and Chen Y F 2023 The design, manufacture and application of multistable mechanical metamaterials-a state-of-the-art review Int. J. Extrem. Manuf. 5 042013

    [22] [22] Meza L R and Greer J R 2014 Mechanical characterization of hollow ceramic nanolattices J. Mater. Sci. 49 2496–508

    [23] [23] Zhang X, Yao J H, Liu B, Yan J, Lu L, Li Y, Gao H J and Li X Y 2018 Three-dimensional high-entropy alloy–polymer composite nanolattices that overcome the strength–recoverability trade-off Nano Lett. 18 4247–56

    [24] [24] Vyatskikh A, Kudo A, Delalande S and Greer J R 2018 Additive manufacturing of polymer-derived titania for one-step solar water purification Mater. Today Commun.15 288–93

    [25] [25] Yu S Y, Schrodj G, Mougin K, Dentzer J, Malval J P, Zan H W,Soppera O and Spangenberg A 2018 Direct laser writing of crystallized TiO2 and TiO2/carbon microstructures with tunable conductive properties Adv. Mater. 30 1805093

    [26] [26] Chai N Y et al 2021 3D nonlinear photolithography of Tin oxide ceramics via femtosecond laser Sci. China Mater.64 1477–84

    [27] [27] Ovsianikov A et al 2008 Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication ACS Nano 2 2257–62

    [28] [28] Wen X W et al 2021 3D-printed silica with nanoscale resolution Nat. Mater. 20 1506–11

    [29] [29] Bauer J, Crook C and Baldacchini T 2023 A sinterless,low-temperature route to 3D print nanoscale optical-grade glass Science 380 960–6

    [30] [30] Moore D G, Barbera L, Masania K and Studart A R 2020 Three-dimensional printing of multicomponent glasses using phase-separating resins Nat. Mater. 19 212–7

    [31] [31] Jonuˇsauskas L, Gailevicˇius D, Mikoliˉunait? L, Sakalauskas D,ˇSakirzanovas S, Juodkazis S and Malinauskas M 2017 Optically clear and resilient free-form μ-optics 3D-printed via ultrafast laser lithography Materials 10 12

    [32] [32] Seniutinas G, Weber A, Padeste C, Sakellari I, Farsari M and David C 2018 Beyond 100 nm resolution in 3D laser lithography–post processing solutions Microelectron. Eng.191 25–31

    [33] [33] Wang X W, Kuchmizhak A A, Brasselet E and Juodkazis S 2017 Dielectric geometric phase optical elements fabricated by femtosecond direct laser writing in photoresists Appl.Phys. Lett. 110 181101

    [34] [34] Castro Y, Aparicio M, Moreno R and Durán A 2005 Silica-zirconia sol–gel coatings obtained by different synthesis routes J. Sol-Gel Sci. Technol. 35 41–50

    [35] [35] Liu C Q, Li K Z, Li H J, Zhang S Y, Zhang Y L and Hou X H 2015 Synthesis, characterization, and ceramization of a SiC–ZrC–C preceramic polymer precursor J. Mater. Sci.50 2824–31

    [36] [36] Rodicˇ P, Iskra J and Miloˇsev I 2014 A hybrid organic–inorganic sol–gel coating for protecting aluminium alloy 7075-T6 against corrosion in Harrison’s solution J.Sol-Gel Sci. Technol. 70 90–103

    [37] [37] Kongwudthiti S, Praserthdam P, Tanakulrungsank W and Inoue M 2003 The influence of Si–O–Zr bonds on the crystal-growth inhibition of zirconia prepared by the glycothermal method J. Mater. Process. Technol.136 186–9

    [38] [38] Bravo-Vasquez J P and Hill R H 2008 Deposition of amorphous silicon dioxide from molecular complexes by a photoresist free process J. Photochem. Photobiol. Achem 193 18–24

    [39] [39] Rodicˇ P, Kati′c J, Korte D, Desimone P M, Franko M,Ceré S M, Metikoˇs-Hukovi′c M and Miloˇsev I 2018 The effect of cerium ions on the structure, porosity and electrochemical properties of Si/Zr-based hybrid sol-gel coatings deposited on aluminum Metals 8 248

    [40] [40] Zhang F, Sun J S, Li Q, Lv K H, Wang J T and Wang Z Y 2022 Mechanism of organosilicate polymer as high-temperature resistant inhibitor in water-based drilling fluids Colloids Surf. A 641 128489

    [41] [41] Bae J Y, Yang S, Jin J H, Jung K, Kim J S and Bae B S 2011 Fabrication of transparent methacrylate zirconium siloxane hybrid materials using sol–gel synthesized oligosiloxane resin J. Sol-Gel Sci. Technol. 58 114–20

    [42] [42] Chaklader A C D and Roberts A L 1959 Sintering of quartz crystal Nature 183 1252–3

    [43] [43] Demont M, Boutakhrit K, Fekete V, Bolle F and Van Loco J 2012 Migration of 18 trace elements from ceramic food contact material: influence of pigment, pH, nature of acid and temperature Food Chem. Toxicol. 50 734–43

    [44] [44] Liu J, Wang Q H, Li Y W, Liang X, Wang X Q, Sang S B,Pan L P and Xu Y B 2021 Inhibiting crystallization of fused silica ceramic at high temperature with addition of α-Si3N4 Ceram. Int. 47 11394–404

    [45] [45] Borodianska H, Demirskyi D, Sakka Y, Badica P and Vasylkiv O 2012 Grain boundary diffusion driven spark plasma sintering of nanocrystalline zirconia Ceram. Int.38 4385–9

    [46] [46] Thiyagarajan G B, Koroleva E, Filimonov A, Vakhrushev S and Kumar R 2022 Thermally tunable dielectric performance of t-ZrO2 stabilized amorphous Si(Pb, Zr)OC ceramic nanocomposites Mater. Chem. Phys. 277 125495

    [47] [47] Li W J, Zhang X H, Hong C Q, Han W B and Han J C 2009 Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics J. Eur. Ceram. Soc. 29 779–86

    [48] [48] Vasanthavel S, Derby B and Kannan S 2017 Tetragonal to cubic transformation of SiO2-stabilized ZrO2 polymorph through dysprosium substitutions Inorg. Chem. 56 1273–81

    [49] [49] Zhou X Q, Hou Y H and Lin J Q 2015 A review on the processing accuracy of two-photon polymerization AIP Adv.5 030701

    Tools

    Get Citation

    Copy Citation Text

    Nianyao Chai, Yunfan Yue, Xiangyu Chen, Zhongle Zeng, Sheng Li, Xuewen Wang. Isotropic sintering shrinkage of 3D glass-ceramic nanolattices: backbone preforming and mechanical enhancement[J]. International Journal of Extreme Manufacturing, 2024, 6(2): 25003

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Aug. 14, 2023

    Accepted: --

    Published Online: Sep. 6, 2024

    The Author Email: Wang Xuewen (xwwang@whut.edu.cn)

    DOI:10.1088/2631-7990/ad1857

    Topics