[1] Qiang SUN, Lunan DAI, Kaining YING. Application of binary search and compressive sensing for rapid detection of defects inside laser ultrasound. Infrared and Laser Engineering, 51, 20210810(2022).

[2] X ZHANG, Y HE, T CHADY et al. CFRP impact damage inspection based on manifold learning using ultrasonic induced thermography. IEEE Transactions on Industrial Informatics, 15, 2648-2659(2018).

[3] M MIRBAGHERI, O RAHMANI, Y MIRBAGHERI. Estimation of residual tensile strength of composite laminate after low-velocity impact using visually inspection. Engineering Failure Analysis, 131, 105898(2022).

[4] Z DENG, Y KANG, J ZHANG et al. Multi-source effect in magnetizing-based eddy current testing sensor for surface crack in ferromagnetic materials. Sensors and Actuators A: Physical, 271, 24-36(2018).

[5] W DU, H SHEN, J FU. Automatic defect segmentation in X-ray images based on deep learning. IEEE Transactions on Industrial Electronics, 68, 12912-12920(2020).

[6] [6] PENG Yiyu, HE Yunze, YU Junfeng, et al. Study on the method of daylightexcited thermal imaging of internal defects in wind turbine blades [J]. Journal of Electronic Measurement Instrumentation , 2024, 38(1):6471. (in Chinese)

[7] [7] CHEN Z. Research on material defect detection method based on laser thermography [D]. Taiyuan: Nth University of China, 2023. (in Chinese)

[8] F CIAMPA, P MAHMOODI, F PINTO et al. Recent advances in active infrared thermography for nondestructive testing of aerospace components. Seneors, 18, 609(2018).

[9] Huipeng WANG, Sicong ZHAI, Jie YANG. Quantitative detection of surface crack width of aluminum alloy based on laser thermography. Infrared and Laser Engineering, 52, 20220902(2023).

[10] D DERUSOVA, V VAVILOV, V SHPILNOI et al. Characterising Hidden Defects in GFRP/CFRP Composites by using laser vibrometry and active IR thermography. Nondestructive Testing and Evaluation, 37, 776-794(2022).

[11] J ROEMER, H KHAWAJA, M MOATAMEDI et al. Data processing scheme for laser spot thermography applied for nondestructive testing of composite laminates. Journal of Nondestructive Evaluation, 42, 1-12(2023).

[12] E KUBIAK. Infrared detection of fatigue cracks and other near-surface defects. Applied Optics, 7, 1743-1748(1968).

[13] [13] DONG N. Defect detection of material surface based on reflective laser thermal imaging [D]. Taiyuan: Nth University of China, 2020. (in Chinese)

[14] S HWANG, Y K AN, H SOHN. Continuous-wave line laser thermography for monitoring of rotating wind turbine blades. Structural Health Monitoring, 18, 1010-1021(2019).

[15] T AUJESZKY, G KORRES, M EID. Measurement-based thermal modeling using laser thermography. IEEE Transactions on Instrumentation and Measurement, 67, 1359-1369(2018).

[16] J MORAN, N RAJIC. Remote line scan thermography for the rapid inspection of composite impact damage. Composite structures, 208, 442-453(2019).

[17] J QIU, C PEI, H LIU et al. Remote inspection of surface cracks in metallic structures with fiber-guided laser array spots thermography. NDT & E International, 92, 213-220(2017).

[18] J WEI, F WANG, J LIU et al. A laser arrays scan thermography (LAsST) for the rapid inspection of CFRP composite with subsurface defects. Composite Structures, 226, 111201(2019).

[19] [19] SAMANG K, DIDIER D, FLIN B, et al. Comparison between microwave infrared thermography CO2 laser infrared thermography in defect detection in applications with CFRP [J]. Materials Sciences Applications , 2013, 4(10): 600605.

[20] A SEMEROK, F JAUBERT, SV FOMICHEV et al. Laser lock-in thermography for thermal contact characterisation of surface layer. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 693, 98-103(2012).

[21] J LIU, Y LIU, F WANG et al. Study on probability of detection (POD) determination using lock-in thermography for nondestructive inspection (NDI) of CFRP composite materials. Infrared Physics & Technology, 71, 448-456(2015).

[22] S KEO, F BRACHELET, F BREABAN et al. Defect detection in CFRP by infrared thermography with CO₂ laser excitation compared to conventional lock-in infrared thermography. Composites Part B: Engineering, 69, 1-5(2015).

[23] M COLOM, A BEDOYA, A MENDIOROZ et al. Measuring the in-plane thermal diffusivity of moving samples using laser spot lock-in thermography. International Journal of Thermal Sciences, 151, 106277(2020).

[24] Cuixiang PEI, Zhenwei CHEN, Zhi WANG. Study an new beam homogenization laser infrared thermography system and applications. Laser & Infrared, 53, 1485-1491(2023).

[25] Fengjing MAO, Rongbang WANG, Zhenwei CHEN. Detection of debonding defects of thermal barrier coatings by pulsed compression laser infrared thermal imaging. Laser & Infrared, 52, 1820-1826(2022).

[26] J QIU, C PEI, H LIU et al. Detection of surface cracks by laser spot thermography at elevated temperature. International Journal of Applied Electromagnetics and Mechanics, 59, 1553-1559(2019).

[27] X YANG, X WANG, W FANG et al. Pulsed thermography with laser beam homogenizing for thickness prediction of thin semi-transparent thermal barrier coatings. Optics and Lasers in Engineering, 158, 107182(2022).

[28] Zhengbo WANG, Lihong DONG, Haidou WANG. Research and application of laser infrared thermography in material defect detection. Materials Reports, 34, 5127-5132(2020).

[29] [29] ZELMANN U. Flyingspot lockin thermography its application to thickness measurement crack detection [C] 12th Int. Conf. on Quantitative Infrared Thermography (QIRT2014), 2014: 17.

[30] Y FEDALA, M STREZA, J P ROGER et al. Open crack depth sizing by laser stimulated infrared lockin thermography. Journal of Physics D: Applied Physics, 47, 465501(2014).

[31] L GONG, J LIU, F WANG et al. Inverse heat transfer approach for nondestructive estimation the size and depth of subsurface defects of CFRP composite using lock-in thermography. Infrared Physics & Technology, 71, 439-447(2015).

[32] N TABATABAEI, A MANDELIS. Thermal-wave radar: A novel subsurface imaging modality with extended depth-resolution dynamic range. Review of Scientific Instruments, 80, 034902(2009).

[33] J GONG, J LIU, L QIN et al. Investigation of carbon fiber reinforced polymer (CFRP) sheet with subsurface defects inspection using thermal-wave radar imaging (TWRI) based on the multi-transform technique. NDT & E International, 62, 130-136(2014).

[34] J LIU, B DONG, F WANG et al. Study on cracks defect inspection for GFRP laminates using laser excitation chirp pulsed photothermal radar imaging (CP-PRI). Infrared Physics & Technology, 114, 103689(2021).

[35] H XIA, J WU, Z XU et al. Defect visualization and depth quantification in scanning induction thermography. IEEE Sensors Journal, 21, 10437-10444(2021).

[36] J KRAPEZ. Résolution spatiale de la caméra thermique à source volante. International Journal of Thermal Sciences, 38, 769-779(1999).

[37] [37] WANG L. Study on defect detection of carbon fiber composites by linelaser scanning thermography [D]. Taiyuan: Nth University of China, 2024. (in Chinese)

[38] Zhengwei YANG, Xingyu XIE, Yin LI. Influence analysis of key parameters in laser scanning thermography nondestructive testing. Infrared and Laser Engineering, 48, 1105008(2019).

[39] [39] ZHAI S. Detection of cracks on aluminum alloy surface based on laser thermography [D]. Ganzhou: Jiangxi University of Science Technology, 2023. (in Chinese)

[40] J LIU, Z ZHANG, Z LIN et al. Characterization method of surface crack based on laser thermography. IEEE Access, 9, 76395-76402(2021).

[41] [41] HE Z, WANG H, LI Y, et al. A deconvolutional reconstruction method based on lucyridson algithm f joint scanning laser thermography [J]. IEEE Transactions on Instrumentation Measurement, 2020, 70: 18.

[42] [42] LIU X, YANG S, LIU Y, et al. Surface crack identification on a cylinder using the signal enhancement of the scanning laser line source method [J]. Applied Sciences , 2018, 8(10): 1796.

[43] B DENG, W WU, X LI. Active 3-D thermography based on feature-free registration of thermogram sequence and 3-D shape via a single thermal camera. IEEE Transaction on Industral Electronics, 69, 11774-11784(2022).

[44] Y FEDALA, M STREZA, F SEPULVEDA et al. Infrared lock-in thermography crack localization on metallic surfaces for industrial diagnosis. Journal of Nondestructive Evaluation, 33, 335-341(2014).

[45] Z WANG, G TIAN, M MEO et al. Image processing based quantitative damage evaluation in composites with long pulse thermography. NDT & E International, 99, 93-104(2018).

[46] Z LIU, D JIAO, W SHI et al. Linear laser fast scanning thermography NDT for artificial disbond defects in thermal barrier coatings. Opt Express, 25, 31789-31800(2017).

[47] F WANG, J LIU, P SONG et al. Multimodal optical excitation pulsed thermography: Enhanced recognize debonding defects of the solid propellant rocket motor cladding layer. Mechanical Systems and Signal Processing, 163, 108164(2022).

[48] Z HE, H WANG, Y HE et al. Joint scanning laser thermography defect detection method for carbon fiber reinforced polymer. IEEE Sensors Journal, 20, 328-336(2019).

[49] B DENG, X LI, H WANG et al. Line scanning thermography reconstruction algorithm for defects inspection with novel velocity estimation and image registration. IEEE Sensors Journal, 21, 11555-11568(2020).

[50] J ROEMER. The concept of laser spot thermography test rig with real-time data processing. The International Journal of Multiphysics, 14, 31-38(2020).

[51] Q WANG, Q HU, J QIU et al. Image enhancement method for laser infrared thermography defect detection in aviation composites. Optical Engineering, 58, 103104(2019).

[52] Y LI, Y SONG, Z YANG et al. Use of line laser scanning thermography for the defect detection and evaluation of composite material. Science and Engineering of Composite Materials, 29, 74-83(2022).

[53] S HWANG, H KIM, H LIM et al. Automated visualization of steel structure coating thickness using line laser scanning thermography. Automation in Construction, 139, 104267(2022).

[54] T LI, D ALMOND, D REES. Crack imaging by scanning pulsed laser spot thermography. NDT & E International, 44, 216-225(2011).

[55] J SCHLICHTING, C MAIERHOFER, M KREUTZBRUCK. Crack sizing by laser excited thermography. NDT & E International, 45, 133-140(2012).

[56] J RODRÍGUEZ-ASEGUINOLAZA, M COLOM, J GONZÁLEZ et al. Quantifying the width and angle of inclined cracks using laser-spot lock-in thermography. NDT & E International, 122, 102494(2021).

[57] L DING, S GORELIK, P WANG et al. Reconfigurable laser-stimulated lock-in thermography for surface micro-crack detection. Sensors, 23, 4090(2023).

[58] C BOUE, S HOLE. Depth evaluation of curvilinear cracks in metal using multi-speed laser lock-in thermography method. Journal of Nondestructive Evaluation, 41, 43(2022).

[59] S HWANG, Y-K AN, J YANG et al. Remote inspection of internal delamination in wind turbine blades using continuous line laser scanning thermography. International Journal of Precision Engineering and Manufacturing-Green Technology, 7, 699-712(2020).

[60] E KUHN, E VALOT, P HERVE. A comparison between thermosonics and thermography for delamination detection in polymer matrix laminates. Composite Structures, 94, 1155-1164(2012).

[61] W SWIDERSKI. Non-destructive testing of CFRP by laser excited thermography. Composite Structures, 209, 710-714(2019).

[62] F WANG, J LIU, L LIU et al. Quantitative non-destructive evaluation of CFRP delamination defect using laser induced chirp-pulsed radar photothermal tomography. Optics and Lasers in Engineering, 149, 106830(2022).

[63] MONTINARO. N, CERNIGLIA D, PITARRESI G. A numerical study on interlaminar defects characterization in fibre metal laminates with flying laser spot thermography. Journal of Nondestructive Evaluation, 37, 1-2(2018).

[64] [64] TANG Q. Research on the key technology of SiC coating defects detection using pulsed infrared thermal wave nondestructive testing method [D]. Harbin: Harbin Institute of Technology, 2014. (in Chinese)

[65] Y XU, S HWANG, Q WANG et al. Laser active thermography for debonding detection in FRP retrofitted concrete structures. NDT & E International, 114, 102285(2020).

[66] [66] ZHANG H, GENEST M, ROBITAILLE F, et al. Infrared thermography ultrasound Cscan f nondestructive evaluation of 3D carbon fiber materials: a comparative study[C]Thermosense: Thermal Infrared Applications XXXVII, SPIE, 2015, 9485: 239253.

[67] L ZHAO, Z HE, Z WANG et al. Simulation and experimental investigation on active thermography test of the solder balls. IEEE Transactions on Industrial Informatics, 16, 1617-1624(2019).

[68] Jia ZHANG, Xinghua LU, Zhenyu ZHU. Line laser lock-in thermal imaging detection of defects in multi-channel digital integrated chips. Laser Journal, 43, 76-80(2022).

[69] Y AN, J YANG, S HWANG et al. Line laser lock-in thermography for instantaneous imaging of cracks in semiconductor chips. Optics and Lasers in Engineering, 73, 128-136(2015).

[70] J YANG, S HWANG, Y AN et al. Multi-spot laser lock-in thermography for real-time imaging of cracks in semiconductor chips during a manufacturing process. Journal of Materials Processing Technology, 229, 94-101(2016).

[71] Xiaonan WANG, Yishu ZHANG, Dexin HOU. Detection of microcrack in inductor based on orthogonal scanning line laser thermography. Infrared and Laser Engineering, 49, 20190522(2020).

[72] Yishu ZHANG, Xiaona WANG, Dexin HOU. Image segmentation of inductors laser thermal imaging based on watershed algorithm. Infrared Technology, 43, 367-371(2021).

[73] A SALAZAR, M COLOM, A MENDIOROZ. Laser-spot step-heating thermography to measure the thermal diffusivity of solids. International Journal of Thermal Sciences, 170, 107124(2021).

[74] Mingxin CHEN, Dexin HOU, Shuliang YE. Test method of in-plane thermal conductivity of thin films based on laser thermal imaging. Acta Metrologica Sinica, 45, 1-8(2024).

[75] J ROEMER, L PIECZONKA, M JUSZCZYK et al. Nondestructive testing of ceramic hip joint implants with laser spot thermography. Archives of Metallurgy and Materials, 62, 2133-2139(2017).

[76] R ZHANG, X GUO, M HE. Intelligent pseudo solder detection in PCB using laser-pulseed thermography and neural network. IEEE Sensors Journal, 22, 631-638(2022).

[77] L KASTNER, S AHMADI, F JONIETZ et al. Classification of spot-welded joints in laser thermography data using convolutional neural networks. IEEE Access, 9, 48303-48312(2021).

[78] S AHMADI, G THUMMERER, S BREITWIESER et al. Multidimensional reconstruction of internal defects in additively manufactured steel using photothermal super resolution combined with virtual wave-based image processing. IEEE Transactions on Industrial Informatics, 17, 7368-7378(2021).

[79] S SFARRA, L GAVÉRINA, C PRADERE et al. Integration study among flying spot laser thermography and terahertz technique for the inspection of panel paintings. Journal of Thermal Analysis and Calorimetry, 147, 8279-8287(2022).