[2] A SOLLI P, T EGGEN, E SKYBAKMOEN. Current efficiency in the Hall-Heroult process for aluminum electrolysis: experimental and modeling studies. Journal of Applied Electrochemistry, 27, 939-946(1997).

[3] Å STERTEN. Current efficiency in aluminum reduction cells. Journal of Applied Electrochemistry, 18, 473-483(1988).

[4] S KOLÅS, T STØRE. Bath temperature and AlF₃ control of an aluminium electrolysis cell. Control Engineering Practice, 17, 1035-1043(2009).

[5] V CONSTANTIN. Influence of the operating parameters over the current efficiency and corrosion rate in the Hall-Heroult aluminum cell with tin oxide anode substrate material. Chinese Journal of Chemical Engineering, 23, 722-726(2015).

[6] P TAYLOR M, D ZHANG W, V WILLS et al. A dynamic model for the energy balance of an electrolysis cell. Chemical Engineering Research and Design, 74, 913-933(1996).

[7] Y SAFA, M FLUECK, J RAPPAZ. Numerical simulation of thermal problems coupled with magneto hydrodynamic effects in aluminium cell. Applied Mathematical Modelling, 33, 1479-1492(2009).

[9] A POSMYK. Co-deposited composite coatings with a ceramic matrix destined for sliding pairs. Surface & Coatings Technology, 206, 3342-3349(2013).

[10] E OLSEN, J THONSTAD. Nickel ferrite as inert anodes in aluminum electrolysis: Part I Material fabrication and preliminary testing. Journal of Applied Electrochemistry, 29, 293-299(1999).

[11] J MA, L BAO, C YAO G et al. Effect of MnO₂ addition on properties of NiFe₂O₄-based cermets. Ceramics International, 37, 3381-3387(2011).

[12] P ZARRABIAN, M KALANTAR, S GHASEMI S. Fabrication and characterization of nickel ferrite based inert anodes for aluminum electrolysis. Journal of Materials Engineering and Performance, 23, 1656-1664(2014).

[13] L TIAN Z, Q LAI Y, Y LI Z et al. Further development on NiFe₂O₄-based cermet inert anodes for aluminum electrolysis. JOM, 66, 2229-2234(2014).

[14] G ZHANG Z, C YAO G, J LUO H et al. Sintering behavior and properties of NiFe₂O₄ ceramic inert anode toughened by adding NiFe₂O₄ nanopowder. Journal of Inorganic Materials, 31, 761-768(2016).

[15] J MOUZON, E GLOWACKI, M ODÉN. Comparison between slip-casting and uniaxial pressing for the fabrication of translucent yttria ceramics. Journal of Materials Science, 43, 2849-2856(2008).

[16] E COMBE, E GUILMEAU, E SAVARY et al. Microwave sintering of Ge-doped In₂O₃ thermoelectric ceramics prepared by slip casting process. Journal of the European Ceramic Society, 35, 145-151(2015).

[17] L ORTIZ A, M CANDELARIO V, R MORENO et al. Near-net shape manufacture of B₄C-Co and ZrC-Co composites by slip casting and pressureless sintering. Journal of the European Ceramic Society, 37, 4577-4584(2017).

[18] J DENG, X YAO D, F XIA Y et al. Gradient porous silicon nitride by slip casting and vacuum foaming. Journal of Inorganic Materials, 31, 865-868(2016).

[19] H HASSANIN, K JIANG. Fabrication and characterization of stabilised zirconia micro parts via slip casting and soft moulding. Scripta Materialia, 69, 433-436(2013).

[20] J ZHOU, B PAN Y, X ZHANG W et al. Fabrication of YAG transparent ceramics using slip casting with ethanol. Journal of Inorganic Materials, 26, 254-256(2011).

[21] A SHAFEIEY, H ENAYATI M, A ALHAJI. The effect of slip casting and spark plasma sintering (SPS) temperature on the transparency of MgAl₂O₄ spinel. Ceramics International, 44, 3536-3540(2018).

[22] G YANG Z, B YU J, J LI C et al. Preparation of textured porous Al₂O₃ ceramics by slip casting in a strong magnetic field and its mechanical properties. Crystal Research & Technology, 50, 645-653(2015).

[23] D BROUCZEK, T KONEGGER. Open-porous silicon nitride-based ceramics in tubular geometry obtained by slip-casting and gelcasting. Advanced Engineering Materials, 19, 1700434(2017).

[24] G ZHANG Z, H LIU Y, C YAO G et al. Solid-state reaction synthesis of NiFe₂O₄ nanoparticles by optimizing the synthetic conditions. Physica E: Low-dimensional Systems and Nanostructures, 45, 122-129(2012).

[26] R ZHANG, L GAO, F CHENG G et al. Fabrication and properties of SiC porous ceramics by slip casting process. Journal of Inorganic Materials, 17, 725-730(2002).

[29] Y LIU X, Y LIU M, L ZHANG. Co-adsorption and sequential adsorption of the co-existence four heavy metal ions and three fluoroquinolones on the functionalized ferromagnetic 3D NiFe₂O₄ porous hollow microsphere. Journal of Colloid and Interface Science, 511, 135-144(2018).

[30] V BHOSALE S, N BANKAR D, V BHORASKAR S et al. Analysis of electrokinetic properties of NiFe₂O₄ nanoparticles synthesized by DC thermal plasma route and its use in adsorption of humic substances. Journal of Environmental Chemical Engineering, 4, 1584-1593(2016).

[31] J BANNISTER M. Shape sensitivity of initial sintering equations. Journal of the American Ceramic Society, 51, 548-553(1968).

[32] R KESKI J, B CUTLER I. Initial sintering of MnXO-Al₂O₃. Journal of the American Ceramic Society, 51, 440-444(1968).

[33] L WOOLFREY J, J BANNISTER M. Nonisothermal techniques for studying initial-stage sintering. Journal of the American Ceramic Society, 55, 390-394(1972).

[34] S ZHANG T, H PETER, T HUANG H et al. Early-stage sintering mechanisms of Fe-doped CeO₂. Journal of Materials Science, 37, 997-1003(2002).

[35] D HANSGN J, P RUSIN R, H TENG M et al. Combined-stage sintering model. Journal of the American Ceramic Society, 75, 1129-1135(1992).