[1] [1] SMUROV I. Laser cladding and laser assisted direct manufacturing［J］. Surface & Coatings Technology, 2008, 202(18): 4496-4502.

[2] [2] CHENG F J, WANG Y S, YANG T G. Microstructure and wear properties of Fe-VC-Cr7C3 composite coating on surface of cast steel ［J］. Materials Characterization, 2008, 59(4): 488-492.

[3] [3] SONG J, ZHANG Q M, LIN X C, et al.. Wear performance of Fe-based alloy coating on the 40Cr steel treated by laser cladding ［J］. High Power Laser and Particle Beams, 2008, 20(1): 21-25. (in Chinese)

[4] [4] VISWANATHAN A, SASTIKUMAR D, KUMAR H, et al.. Formation of WC-iron silicide (Fe5Si3) composite clad layer on AISI 316L stainless steel by high power (CO2) laser ［J］. Surface & Coatings Technology, 2009, 203(12): 1618-1623.

[5] [5] TOBAR M J, LVAREZ C, AMADO J M, et al.. Morphology and characterization of laser clad composite NiCrBSi-WC coatings on stainless steel ［J］. Surface & Coatings Technology, 2006, 200(22-23): 6313-6317.

[6] [6] AMADO J M, TOBAR M J, ALVAREZ J C, et al.. Laser cladding of tungsten carbides hardfacing alloys for the mining and mineral industry ［J］. Applied Surface Science, 2009, 255(10): 5553-5556.

[7] [7] BADDOO N R. Stainless steel in construction: a review of research, applications, challenges and opportunities ［J］. Constructional Steel Research, 2008, 64(11): 1199-1206.

[8] [8] PAUL C P, KHAJEPOUR A. Automated laser fabrication of cemented carbide components ［J］. Optics & Laser Technology, 2008, 40(5): 735-741.

[9] [9] XIE G ZH, LU Y J, HE Z Y, et al.. Microstructure and corrosion properties of plasma-sprayed NiCr-Cr3C2 coatings comparison with different post treatment ［J］. Surface & Coatings Technology, 2008, 202(13): 2885-2890.

[10] [10] JIANG ZH P, TIAN N L. Laser cladding Ni-based alloy with WC ［J］. Laser & Infrared, 2004, 34(3): 189-191. (in Chinese)

[11] [11] RADZIEJEWSKA J, SKRZYPEK S J. Microstructure and residual stresses in surface layer of simultaneously laser alloyed and burnished steel ［J］. Materials Processing Technology, 2009, 209(4): 2047-2056.

[12] [12] CHA Y, ZHOU CH C, TANG X N, et al.. Study of improvement of properties of laser cladding Ni super-alloy and WC composite layers ［J］. Chinese Journal of Lasers, 1999, 26(10): 947-950. (in Chinese)

[13] [13] TU Y, ZHANG Y ZH, XI M ZH. Investigation of nickel-based alloys coating on stainless steel by laser cladding ［J］. Chinese Journal of Rare Metals, 2008, 32(5): 598-604. (in Chinese)

[14] [14] CHEN H CH, XUA C Y, CHEN J, et al.. Microstructure and phase transformation of WC/Ni60B laser cladding coatings during dry sliding wear ［J］. Wear, 2008, 264(7-8): 487-493.

[15] [15] ZHOU SH F, HUANG Y J, ZENG X Y. A study of Ni-based WC composite coatings by laser induction hybrid rapid cladding with elliptical spot ［J］. Applied Surface Science, 2008, 254(10): 3110-3119.

[16] [16] LI Q, ZHANG Y ZH, LI J F, et al.. Microstructure and corrosion performance of laser clad 316L stainless steel coating ［J］. Laser Technology, 2004, 28(3): 237-240.

[17] [17] FAN D, LI Q, ZHANG J B. Microstructure and corrosion performance of laser melt-clad FeNiCrAl alloying coating ［J］. Journal of Lanzhou University of Technology, 2009, 35(2): 13-16. (in Chinese)