[1] [1] TAHER M A. Influence of thermally treated phosphogypsum on the properties of Portland slag cement［J］. Resources, Conservation and Recycling, 2007, 52(1): 28-38.

[2] [2] POTGIETER J H, POTGIETER S S, MCCRINDLE R I. A comparison of the performance of various synthetic gypsums in plant trials during the manufacturing of OPC clinker［J］. Cement and Concrete Research, 2004, 34(12): 2245-2250.

[3] [3] SINGH M. Role of phosphogypsum impurities on strength and microstructure of selenite plaster［J］. Construction and Building Materials, 2005, 19(6): 480-486.

[4] [4] LIN Z S, HUANG Y, SHUI Z H, et al. Excess-sulfate phosphogypsum slag cement and concrete［M］. Wuhan: Wuhan University of Technology Press, 2015 (in Chinese).

[5] [5] LIU Q, YANG C, LYU X J, et al. Evolution of ettringite content and its effects on hydration properties of CaO/fluorgypsum-activated granulated blast furnace slag binders［J］. Advanced Composites and Hybrid Materials, 2021, 4(2): 350-359.

[6] [6] WANG Z Y, SHUI Z H, SUN T, et al. Recycling utilization of phosphogypsum in eco excess-sulphate cement: synergistic effects of metakaolin and slag additives on hydration, strength and microstructure［J］. Journal of Cleaner Production, 2022, 358: 131901.

[7] [7] MESKINI S, SAMDI A, EJJAOUANI H, et al. Valorization of phosphogypsum as a road material: stabilizing effect of fly ash and lime additives on strength and durability［J］. Journal of Cleaner Production, 2021, 323: 129161.

[8] [8] REIJNDERS L. Cleaner phosphogypsum, coal combustion ashes and waste incineration ashes for application in building materials: a review［J］. Building and Environment, 2007, 42(2): 1036-1042.

[9] [9] AYDN S, BARADAN B. Mechanical and microstructural properties of heat cured alkali-activated slag mortars［J］. Materials & Design, 2012, 35: 374-383.

[10] [10] XU F, LI H, SUN T, et al. Composition design of excess-sulfate phosphogypsum slag cement based on molecular dynamics simulation［J］. Acta Materiae Compositae Sinica, 2022, 39(6): 2821-2828 (in Chinese).

[11] [11] WANG S B, JI S X, LIU Y J, et al. Effect of alkali on expansion of sulfoaluminate cement［J］. Journal of the Chinese Ceramic Society, 1986, 14(3): 285-292 (in Chinese).

[12] [12] ZHAO S H, LIN X H, MA P F, et al. Study on formulation calculation of phosphogypsum-based composite cementitious materials based on expansion and failure of critical AFt［J］. Inorganic Chemicals Industry, 2020, 52(9): 91-95 (in Chinese).

[13] [13] LI L Y, SHI Z L, AI Y P. Alkaline activation of gypsum-granulated blast furnace slag cementing materials［J］. Journal of the Chinese Ceramic Society, 2008, 36(3): 405-410 (in Chinese).

[14] [14] ZHANG J J, SUN G W, WANG C H, et al. Activation effects and micro quantitative characterization of high-volume ground granulated blast furnace slag in cement-based composites［J］. Cement and Concrete Composites, 2020, 109: 103556.

[15] [15] LAN M Z, TANG R R, CHEN Z F, et al. Effect of silica dioxide content on properties of sulpho-aluminate cement［J］. Cement Guide for New Epoch, 2002, 8(4): 33-36+8 (in Chinese).

[16] [16] HUANG Y B, QIAN J S, LU L C, et al. Phosphogypsum as a component of calcium sulfoaluminate cement: hazardous elements immobilization, radioactivity and performances［J］. Journal of Cleaner Production, 2020, 248: 119287.

[17] [17] ZHOU Y, XU F, GU G H, et al. Early compressive strength and molecular dynamics simulation of geopolymer［J］. Journal of Building Materials, 2021, 24(1): 93-98+120 (in Chinese).

[18] [18] CHEN B M, QIAO G, HOU D S, et al. Cement-based material modified by in situ polymerization: from experiments to molecular dynamics investigation［J］. Composites Part B: Engineering, 2020, 194: 108036.

[19] [19] HOU D S, YU J, LIU Q F, et al. Nanoscale insight on the epoxy-cement interface in salt solution: a molecular dynamics study［J］. Applied Surface Science, 2020, 509: 145322.

[20] [20] LIANG Y Z. Mechanical and fracture properties of calcium silicate hydrate and calcium hydroxide composite from reactive molecular dynamics simulations［J］. Chemical Physics Letters, 2020, 761: 138117.

[21] [21] LIU L B, ZHANG Y S, TAN K F. Cementitious binder of phosphogypsum and other materials［J］. Advances in Cement Research, 2015, 27(10): 567-570.

[22] [22] YANG G, ZHAO Y, ZHU L L, et al. Preparation and compressive strength of geopolymer based on alkali activated metakaolin［J］. Bulletin of the Chinese Ceramic Society, 2022, 41(3): 894-902 (in Chinese).

[23] [23] ZHANG T, ZHU C. Strength, shrinkage performance and microstructure of cement-silica fume/fly ash system［J］. Bulletin of the Chinese Ceramic Society, 2022, 41(3): 903-912 (in Chinese).

[24] [24] ZHAI J L, LAI H, MAO N, et al. Effect of compound mineral admixture on water resistance of magnesium oxychloride cement［J］. Bulletin of the Chinese Ceramic Society, 2022, 41(10): 3590-3598 (in Chinese).

[25] [25] AN Q, PAN H M, WANG S, et al. Effects of fly ash and slag particle size distributions on microstructure and chloride ion penetration resistance of concrete［J］. Bulletin of the Chinese Ceramic Society, 2022, 41(3): 884-893 (in Chinese).