[1] [1] Li Biaorong. Technological Principle of Electronic Ceramic[M]. Wuchang: Press of Huazhong University of Science and Technology, 1986. 1

[2] [2] Xiao Hanning, Gao Pengzhao. Applications and Fabrication of High Performance Structure Ceramic[M]. Beijing: Chemical Industry Press, 2006

[3] [3] Zheng Lei, Yuan Juntang, Li Shaohua. Drilling of hole mechanisms of ceramic of compositie armors [J]. J. Chinese Ceramic Society, 2007, 35: 568

[4] [4] Chen Hongxin, Jia Tianqing, Huang Min et al.. Visible-infrared femtosecond laser-induced optical breakdown of 6H SiC[J]. Acta Optica Sinica, 2006， 26(3): 467～470

[5] [5] Zhang Shan, Kang Shaoying. Experimental studies of laser processing of ceramic strength[J]. Applied Laser, 1996，16(5)： 218～220

[6] [6] K. Li, P. Sheng. Plane stress model for fracture of ceramics during laser cutting[J]. Int. J. Mach. Tools Manufact, 1995, 35(11): 1493～1506

[7] [7] Zhang Shan, Kang Shaoying. Experimental studies of laser processing of constructural ceramics[J]. Chinese J. Lasers, 1995，A22(10)： 797～800

[8] [8] R. Akarapu, A. E. Segall. Numerical simulations of an active-stressing technique for delaying fracture during cutting of alumina[J]. J. Manufacturing Science and Engineering, 2006, 128: 921～927

[9] [9] G. Lu, E. Siores, B. Wang. An empirical equation for crack formation in the laser cutting of ceramic plate[J].J. Materials Processing Technology， 1999， 88(1)： 154～158

[10] [10] N. Barsch, K. Korber, A Ostendorf et al.. Ablation and cutting of planar silicon devices using femtosecond laser pulses[J]. Appl. Phys. A, 2003, 77: 237～242

[11] [11] Zhang Zheng, Liang Yong, Zhang bingchun et al.. Study on the re-cast layer for laser drilling of Al2O3 ceramics[J]. Laser J., 2000，21(1)： 43～45

[12] [12] B. P. Pifutsk. Gas-aided laser cutting of thin and brittle materials[P]. China Patent: CN1222389C，2005-10-12

[13] [13] F. Quintero, J. Pou, F. Lusquinos et al.. Comparative study of the influence of the gas injection system on the Nd; Yttrium-aluminum-garnet laser cutting of advanced oxide ceramics[J]. Review of Scientific Instruments， 2003， 74(9)： 4199～4205

[14] [14] Liu Guozhen. Method and instrument for self-substrate cutting devices[P]. China Patent: CN1508850，2004-6-30

[15] [15] I. Black，K. L. Chua. Laser cutting of thick ceramic tile[J]. Optics & Laser Technology, 1997，29(4)： 193～205

[16] [16] I. Black. Laser cutting speeds for ceramic tile： a theoretical-empirical comparison[J]. Optics & Laser Technology, 1998， 30： 95～101

[17] [17] F. Quintero, J. Pou, F. Lusquinos et al.. Nd∶YAG laser cutting of advanced ceramics[C]. SPIE， 2001， 4419： 756～760

[18] [18] Hong Lei，Li Lijun. A study of laser cutting engineering ceramics[J]. Optics & Laser Technology， 1999, (31)： 531～538

[19] [19] Hyoung-Shik Kang, Soon-Kug Hong, Seok-Chang Oh et al.. A study of cutting glass by laser[J]. SPIE, 2002, 4426: 367～370

[20] [20] Yu-Zan Wang, Lehnming Lin. Characterization of laser cleaving on glass sheets with a line-shape beam[J]. Optics & Laser Technology, 2007, 39: 892～899

[21] [21] Chwan-Huei Tsai，Bor-Chang Lin. Laser cutting with controlled fracture and pre-bending applied to LCD glass separation[J]. Int J. Adv. Manuf. Technol.， 2005. Original article

[22] [22] Chwan-Huei Tsai, Chuen-Heng Ou. Machining a smooth surface of ceramic material by laser fracture machining technique[J]. J. Materials Processing Technology, 2004, 155～156: 1797～1804

[23] [23] Chwan-Huei Tsai, Hong-Wen Chen. Laser cutting of thick ceramic substrates by controlled fracture technique[J]. J. Materials Processing Technology, 2003, 136: 166～173

[24] [24] V. Pereles-Santiago, M. Washington, P. Brugan et al.. Faster and damage-reduced laser cutting of thick ceramics using a simultaneous prescore approach[J]. J. Laser Applications, 2005， 17(4)： 219～224

[25] [25] Nan Hengyou, Qiu Dagao, Quan Baijun. Method and device for laser cutting of non-metal substrate [P]. China Patent: CN1349875, 2005-5-22

[26] [26] Ye Zhenhuan, Lou Qihong, Dong Jingxing et al.. Water-bath laser ablation and the laser processing method [P]. China Patent: CN1475324A，2004-2-18

[27] [27] Noboru Morita, Shuichi Ishida, Yasutomo Fujimori et al.. Pulsed laser processing of ceramics in water[J]. Appl. Phys. Lett., 1987, 52(23): 1965～1966

[28] [28] Zhu Bo, Qi Litao, Wang Yang et al.. The experimental study of water assisted laser machining[J]. Modern Manufacturing Engineering, 2003, 12： 73～74

[29] [29] Zhu Hua, Hua Yinqun. The research to the influencing factors of laser-cutting quality under water[J]. Laser J., 2007, 28： 73～74

[30] [30] Delphine Perrottet, Roy Housh, Bernold Richerzhagen et al.. Heat damage-free laser-microjet cutting achieves highest die fracture strength[J]. SPIE, 2005, 5713: 285～292

[31] [31] Li Lijun. An idea about “Laser Cutting Process”[J]. J. Hunan University (Natural Sciences), 1982，9(4)： 1～10

[32] [32] Aria, Kondou. Adhesive belt for cutting and the cutting method for semiconductor[P]. China Patent: CN1244726，2000-2-16

[33] [33] Jiang Yijian, Yan Yinzhou, Bao Yong et al.. Parallel-axis positioning device and method for laser processing of materials[P]. China Patent Application Number: 200810115283.9，2008-06-20