[1] [1] JIANG Z W, HE B, ZHU X P, et al. State-of-the-art review on properties evolution and deterioration mechanism of concrete at cryogenic temperature[J]. Constr Build Mater, 2020, 257: 119456.

[2] [2] HE B, XIE M J, JIANG Z W, et al. Temperature field distribution and microstructure of cement-based materials under cryogenic freeze-thaw cycles[J]. Constr Build Mater, 2020, 243: 118256.

[3] [3] WU Z M, SHI C J, HE W, et al. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete[J]. Constr Build Mater, 2016, 103: 8-14.

[4] [4] CHENG L N, LIU J H, DUAN P J, et al. Mechanical properties and degradation mechanism of LNG containment concrete material under cryogenic conditions[J]. Constr Build Mater, 2022, 347: 128557.

[5] [5] KIM M J, KIM S, LEE S K, et al. Mechanical properties of ultra-high-performance fiber-reinforced concrete at cryogenic temperatures[J]. Constr Build Mater, 2017, 157: 498-508.

[6] [6] ZHANG H E, SARKER P K, XIAO L, et al. Durability of low-carbon geopolymer mortar: different responses to cryogenic attack caused by water content and freeze-thaw mediums[J]. Cem Concr Compos, 2023, 139: 105065.

[7] [7] XIE J, LI X M, WU H H. Experimental study on the axial-compression performance of concrete at cryogenic temperatures[J]. Constr Build Mater, 2014, 72: 380-388.

[8] [8] LI Huijie, XIE Jian. Eng Mech, 2011, 28(S1): 80-84.

[9] [9] KOGBARA R B, SEONG M, ZOLLINGER D G, et al. Insights from bond-slip investigations in different reinforced concrete mixtures for LNG containment[J]. Case Stud Therm Eng, 2021, 23: 100812.

[10] [10] YAN J B, YANG X Y, LUO Y L, et al. Axial compression behaviours of ultra-high performance concrete-filled Q690 high-strength steel tubes at low temperatures[J]. Thin Walled Struct, 2021, 169: 108419.

[11] [11] SHI C J, WU Z M, XIAO J F, et al. A review on ultra high performance concrete: part I. Raw materials and mixture design[J]. Constr Build Mater, 2015, 101: 741-751.

[12] [12] HE B, ZHU X P, REN Q, et al. Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack[J]. Constr Build Mater, 2020, 265: 120323.

[13] [13] MONFORE G, LENTZ A. Physical properties of concrete at very low temperatures [R]. Portland Cement Association, 1962.

[14] [14] WANG Y R, CAO Y B, ZHANG P, et al. Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze-thaw cycles[J]. Constr Build Mater, 2019, 209: 566-576.

[15] [15] MONTEIRO P J M, RASHED A I, BASTACKY J, et al. Ice in cement paste as analyzed in the low-temperature scanning electron microscope[J]. Cem Concr Res, 1989, 19(2): 306-314.

[16] [16] WANG K, MONTEIRO P J, RUBINSKY B. Microscopic study of ice propagation in concrete[J]. ACI Mater J, 1996, 93(4): 370-377.

[17] [17] SHI Xudong, MA Chi, ZHANG Tianshen, et al. Eng Mech, 2017, 34(3): 61-67.

[18] [18] MACLEAN T J, LLOYD A. Compressive stress-strain response of concrete exposed to low temperatures[J]. J Cold Reg Eng, 2019, 33(4): 04019014.

[19] [19] TOGNON G. Behaviour of mortars and concretes in the temperature range from +20 ℃ to -196 ℃[C]: Proceedings of the Fifth International Symposium on the Chemistry of Cement, 1968.

[20] [20] MIURA T. The properties of concrete at very low temperatures[J]. Mater Struct, 1989, 22(4): 243-254.

[21] [21] HUO Y L, SUN H Y, LU D, et al. Mechanical properties of concrete at low and ultra-low temperatures- a review[J]. J Infrastruct Preserv Resil, 2022, 3(1): 1-15.

[22] [22] DAHMANI L, KHENANE A, KACI S. Behavior of the reinforced concrete at cryogenic temperatures[J]. Cryogenics, 2007, 47(9-10): 517-525.

[23] [23] ROSTáSY F S, PUSCH U. Strength and deformation of lightweight concrete of variable moisture content at very low temperatures[J]. Int J Cem Compos Light Concr, 1987, 9(1): 3-17.

[24] [24] KIM M J, YOO D Y, KIM S, et al. Effects of fiber geometry and cryogenic condition on mechanical properties of ultra-high-performance fiber-reinforced concrete[J]. Cem Concr Res, 2018, 107: 30-40.

[25] [25] BROWNE R, BAMFORTH P. The use of concrete for cryogenic storage: A summary of research, past, and present[C]: Proceedings of the Proc, 1st Int Conf on Cryogenic Concrete, 1981.

[26] [26] ZHANG Nan, LIAO Juan, JI Wenzhan, et al. J Chin Ceram Soc, 2014, 42(11): 1404-1408.

[27] [27] KRSTULOVIC-OPARA N. Liquefied natural gas storage: material behavior of concrete at cryogenic temperatures[J]. ACI Mater J, 2007, 104(3): 297-306.

[28] [28] JIANG Zhengwu, LI Xiongying. J Chin Ceram Soc, 2010, 38(4): 602-607.

[29] [29] KIM S, KIM M J, YOON H, et al. Effect of cryogenic temperature on the flexural and cracking behaviors of ultra-high-performance fiber-reinforced concrete[J]. Cryogenics, 2018, 93: 75-85.

[30] [30] HE B, ZHANG H E, ZHU X P, et al. Thermal-dependent brittleness effect of ultra-high performance concrete exposed to cryogenic flexural loads by acoustic emission evaluation[J]. Cem Concr Compos, 2023, 139: 105056.

[31] [31] MANUEL E, HUGO C, PLANAS J. Behavior at cryogenic temperatures of steel for concrete reinforcement[J]. ACI J Proc, 1986, 83(3): 405-411.

[32] [32] YAN J B, XIE J. Experimental studies on mechanical properties of steel reinforcements under cryogenic temperatures[J]. Constr Build Mater, 2017, 151: 661-672.

[33] [33] XIE Jian, LI Huijie, NIE Zhimeng, et al. China Civ Eng J, 2012, 45(10): 31-40.

[34] [34] XIE J, SIMIYU E S, LEI G C, et al. Experimental study on bonding properties between steel strand and concrete at cryogenic temperatures[J]. Trans Tianjin Univ, 2016, 22(4): 308-316.

[35] [35] VANDEWALLE L. Bond between a reinforcement bar and concrete at normal and cryogenic temperatures[J]. J Mater Sci Lett, 1989, 8(2): 147-149.

[36] [36] XIE J, LIU Y, QIAO Y, et al. Bond behaviors of ribbed CFRP bars in concrete exposed to low temperatures[J]. Constr Build Mater, 2022, 341: 127910.

[37] [37] JIN L, LIU K X, ZHANG R B, et al. Bond behavior between steel bar and concrete considering cryogenic temperatures and confinement[J]. Case Stud Constr Mater, 2023, 18: e01856.

[38] [38] KIM M J, YOO D Y. Cryogenic pullout behavior of steel fibers from ultra-high-performance concrete under impact loading[J]. Constr Build Mater, 2020, 239: 117852.

[39] [39] LEE G C, SHIH T S, CHANG K C. Mechanical properties of high-strength concrete at low temperature[J]. J Cold Reg Eng, 1988, 2(4): 169-178.

[40] [40] MONTEJO L A, SLOAN J E, KOWALSKY M J, et al. Cyclic response of reinforced concrete members at low temperatures[J]. J Cold Reg Eng, 2008, 22(3): 79-102.

[41] [41] BERNER D E. Behavior of prestressed concrete subjected to low temperatures and cyclic loading (cryogenic, offshore) [D]. University of California, 1984.

[42] [42] TOGNON G. Behaviour of mortars and concretes in the temperature range from +20 ℃ to -196 ℃[J]. 5th Int Congr Chem Cem Part 3, 1968: 229-249.

[43] [43] YAN J B, XIE J. Behaviours of reinforced concrete beams under low temperatures[J]. Constr Build Mater, 2017, 141: 410-425.

[44] [44] KANG E C, XIE J, YAN J B. Static and cyclic compressive behaviours of ultra-high performance concrete in cold regions[J]. Cold Reg Sci Technol, 2023, 213: 103937.

[45] [45] BIDDLE J W, HOLTEN V, SENGERS J V, et al. Thermal conductivity of supercooled water[J]. Phys Rev E Stat Nonlin Soft Matter Phys, 2013, 87(4): 042302.

[46] [46] ENGLISH N J, TSE J S. Thermal conductivity of supercooled water: an equilibrium molecular dynamics exploration[J]. J Phys Chem Lett, 2014, 5(21): 3819-3824.

[47] [47] JIANG Z W, DENG Z L, ZHU X P, et al. Increased strength and related mechanisms for mortars at cryogenic temperatures[J]. Cryogenics, 2018, 94: 5-13.

[48] [48] BRUN M, LALLEMAND A, QUINSON J F, et al. A new method for the simultaneous determination of the size and shape of pores: the thermoporometry[J]. Thermochim Acta, 1977, 21(1): 59-88.

[49] [49] JIANG Z W, ZHANG C, DENG Z L, et al. Thermal strain of cement-based materials under cryogenic temperatures and its freeze-thaw cycles using fibre Bragg grating sensor[J]. Cryogenics, 2019, 100: 1-10.

[50] [50] RHARDANE A, AL HAJ SLEIMAN S, ALAM S Y, et al. A quantitative assessment of the parameters involved in the freeze-thaw damage of cement-based materials through numerical modelling[J]. Constr Build Mater, 2021, 272: 121838.

[51] [51] JIANG Z W, DENG Z L, ZHANG N. Study on pore structure characterization of concrete at different ages by thermoporometry[J]. Key Eng Mater, 2013, 539: 178-183.

[52] [52] PICKETT G. Theory of volume changes in hardened port land-cement paste during freezing[J]. Highway Res Board Proceed, 1953, 32: 285-197.

[53] [53] SETZER M. Micro ice lens formation, artificial saturation and damage during freeze thaw attack[J]. Mater Build Struct, 2005, 6: 175-182.

[54] [54] SETZER M J. Micro-ice-lens formation in porous solid[J]. J Colloid Interface Sci, 2001, 243(1): 193-201.

[55] [55] LIU J H, ZHOU D W, CHENG L N, et al. A review on evolution laws and mechanism of concrete performance under cryogenic circumstance from multi-scale perspectives[J]. J Build Eng, 2023, 64: 105666.

[56] [56] PILEHVAR S, SZCZOTOK A M, RODRíGUEZ J F, et al. Effect of freeze-thaw cycles on the mechanical behavior of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials[J]. Constr Build Mater, 2019, 200: 94-103.

[57] [57] KOGBARA R B, IYENGAR S R, GRASLEY Z C, et al. Correlation between thermal deformation and microcracking in concrete during cryogenic cooling[J]. NDT E Int, 2016, 77: 1-10.

[58] [58] CUI J, HAO H, SHI Y C. Study of concrete damage mechanism under hydrostatic pressure by numerical simulations[J]. Constr Build Mater, 2018, 160: 440-449.

[59] [59] ZHU X P, HE B, XIE M J, et al. A comprehensive nitrogen adsorption measurement on the pore structure of calcium-silicate-hydrate subjected to cryogenic attack[J]. Measurement, 2021, 184: 109941.

[60] [60] ZHU X P, JIANG Z W, HE B, et al. Investigation on the physical stability of calcium-silicate-hydrate with varying CaO/SiO2 ratios under cryogenic attack[J]. Constr Build Mater, 2020, 252: 119103.

[61] [61] ZHU X P, QIAN C, HE B, et al. Experimental study on the stability of C-S-H nanostructures with varying bulk CaO/SiO2 ratios under cryogenic attack[J]. Cem Concr Res, 2020, 135: 106114.

[62] [62] ZHU X P, REN Q, HE B, et al. The nanomechanical nature of cementitious calcium-(alumino)silicate-hydrate under ultra-low temperature attack: an intrinsic transition and the role of aluminum for bottom-up enhancement[J]. Cem Concr Compos, 2022, 134: 104811.

[63] [63] ZHU X P, REN Q, HE B, et al. Upscaling degradation of cementitious calcium (aluminate) silicate hydrate upon ultra-low temperature attack: a multiscale insight and a bottom-up enhancement route[J]. Compos Part B Eng, 2022, 243: 110122.

[64] [64] ZHU X P, BROCHARD L, VANDAMME M, et al. Scaling of nanoscale elastic and tensile failure properties of cementitious calcium-silicate-hydrate materials at cryogenic temperatures: a molecular simulation study[J]. Cem Concr Res, 2023, 172: 107242.

[65] [65] ARAKAWA M, MAENO N. Mechanical strength of polycrystalline ice under uniaxial compression[J]. Cold Reg Sci Technol, 1997, 26(3): 215-229.

[66] [66] POWERS T, WILLIS T. The air requirement of frost resistant concrete[J]. Highway Res Board Proceed, 1950, 29: 184-211.

[67] [67] VALENZA J J, SCHERER G W. A review of salt scaling: II. Mechanisms[J]. Cem Concr Res, 2007, 37(7): 1022-1034.

[68] [68] VALENZA J J II, SCHERER G W. Mechanism for salt scaling[J]. J Am Ceram Soc, 2006, 89(4): 1161-1179.

[69] [69] VALENZA J J, SCHERER G W. Mechanisms of salt scaling[J]. Mater Struct, 2005, 38(4): 479-488.

[70] [70] COUSSY O. Poromechanics[M]. 2nd ed. Chichester, West Sussex, England: Wiley, 2004.

[71] [71] COUSSY O. Mechanics and Physics of Porous Solids[M]. Wiley, 2010.

[72] [72] COUSSY O, MONTEIRO P J M. Poroelastic model for concrete exposed to freezing temperatures[J]. Cem Concr Res, 2008, 38(1): 40-48.