International Journal of Extreme Manufacturing, Volume. 6, Issue 6, 62011(2024)

Mechanism and manufacturing of 4D printing: derived and beyond the combination of 3D printing and shape memory material

Feng Pei... Yang Feng, Jia Jiye, Zhang Jing, Tan Wei and Shuai Cijun |Show fewer author(s)
References(425)

[1] [1] Tibbits S 2013 The emergence of “4D printing” (available at: www.ted.com/talks/skylar_tibbits_the_emergence_of_4d_printing)

[2] [2] Ma J, Franco B, Tapia G, Karayagiz K, Johnson L, Liu J, Arroyave R, Karaman I and Elwany A 2017 Spatial control of functional response in 4D-printed active metallic structures Sci. Rep.7 46707

[3] [3] Kim D, Ferretto I, Leinenbach C and Lee W 2022 3D and 4D printing of complex structures of Fe-Mn-Si-based shape memory alloy using laser powder bed fusion Adv. Mater. Interfaces9 2200171

[4] [4] Caputo M P, Berkowitz A E, Armstrong A, Mllner P and Solomon C V 2018 4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys Addit. Manuf.21 579–88

[5] [5] Chen W, Gu D D, Yang J K, Yang Q, Chen J and Shen X F 2022 Compressive mechanical properties and shape memory effect of NiTi gradient lattice structures fabricated by laser powder bed fusion Int. J. Extrem. Manuf.4 045002

[6] [6] Wei S S, Zhang J L, Zhang L, Zhang Y J, Song B, Wang X B, Fan J X, Liu Q and Shi Y S 2023 Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a review Int. J. Extrem. Manuf.5 032001

[7] [7] Zhang J, Xu M K, Zhang N, Wang T M, Zhang Y M, Yang Z H and Wang Q H 2024 Advances and applications of 4D-printed high-strength shape memory polymers Addit. Manuf. Front.3 200115

[8] [8] Gonzlez-Henrquez C M, Sarabia-Vallejos M A and Rodriguez-Hernandez J 2019 Polymers for additive manufacturing and 4D-printing: materials, methodologies, and biomedical applications Prog. Polym. Sci.94 57–116

[9] [9] Chen M, Gao M, Bai L C, Zheng H, Qi H J and Zhou K 2023 Recent advances in 4D printing of liquid crystal elastomers Adv. Mater.35 2209566

[10] [10] Wang R, Yuan C, Cheng J X, He X N, Ye H T, Jian B C, Li H G, Bai J M and Ge Q 2024 Direct 4D printing of ceramics driven by hydrogel dehydration Nat. Commun.15 758

[11] [11] Liu G et al 2023 4D additive-subtractive manufacturing of shape memory ceramics Adv. Mater.35 2302108

[12] [12] Li T, Liu Q Y, Qi H B and Zhai W 2022 Prestrain programmable 4D printing of nanoceramic composites with bioinspired microstructure Small18 2204032

[13] [13] Wang Y, Cui H T, Esworthy T, Mei D Q, Wang Y C and Zhang L G 2022 Emerging 4D printing strategies for next-generation tissue regeneration and medical devices Adv. Mater.34 2109198

[14] [14] Wan X et al 2024 Recent advances in 4D printing of advanced materials and structures for functional applications Adv. Mater.36 2312263

[15] [15] Lyu Z Y, Wang J L and Chen Y F 2023 4D printing: interdisciplinary integration of smart materials, structural design, and new functionality Int. J. Extrem. Manuf.5 032011

[16] [16] Han X Y, Saiding Q, Cai X L, Xiao Y, Wang P, Cai Z W, Gong X, Gong W M, Zhang X C and Cui W G 2023 Intelligent vascularized 3D/4D/5D/6D-printed tissue scaffolds Nano-Micro. Lett.15 239

[17] [17] Chen X, Han S Y, Wu W H, Wu Z H, Yuan Y, Wu J and Liu C S 2022 Harnessing 4D printing bioscaffolds for advanced orthopedics Small18 2106824

[18] [18] Chen A N et al 2024 Multimaterial 3D and 4D bioprinting of heterogenous constructs for tissue engineering Adv. Mater.36 2307686

[19] [19] Yan S Y, Zhang F H, Luo L, Wang L L, Liu Y J and Leng J S 2023 Shape memory polymer composites: 4D printing, smart structures, and applications Research6 0234

[20] [20] Mahmood A, Akram T, Shenggui C and Chen H F 2023 Revolutionizing manufacturing: a review of 4D printing materials, stimuli, and cutting-edge applications Composites B 266 110952

[21] [21] Shahbazi M, Jger H, Ettelaie R, Mohammadi A and Kashi P A 2023 Multimaterial 3D printing of self-assembling smart thermo-responsive polymers into 4D printed objects: a review Addit. Manuf.71 103598

[22] [22] Ren L, Wang Z G, Ren L Q, Xu C, Li B Q, Shi Y S and Liu Q P 2023 Understanding the role of process parameters in 4D printing: a review Composites B 265 110938

[23] [23] Zhou X L, Ren L, Song Z, Li G, Zhang J, Li B, Wu Q, Li W, Ren L and Liu Q 2023 Advances in 3D/4D printing of mechanical metamaterials: from manufacturing to applications Composites B 254 110585

[24] [24] de Kergariou C, Demoly F, Perriman A, Le Duigou A and Scarpa F 2023 The design of 4D-printed hygromorphs: state-of-the-art and future challenges Adv. Funct. Mater.33 2210353

[25] [25] Yarali E, Mirzaali M J, Ghalayaniesfahani A, Accardo A, Diaz-payno P J and Zadpoor A A 2024 4D printing for biomedical applications Adv. Mater.36 2402301

[26] [26] Shi H, Zhang M and Mujumdar A S 2024 3D/4D printed super reconstructed foods: characteristics, research progress, and prospects Comprehensive Rev. Food Sci. Food Saf.23 e13310

[27] [27] Huang J J, Xia S J, Li Z A, Wu X W and Ren J N 2021 Applications of four-dimensional printing in emerging directions: review and prospects J. Mater. Sci. Technol.91 105–20

[28] [28] Li H G et al 2024 Reconfigurable 4D printing via mechanically robust covalent adaptable network shape memory polymer Sci. Adv.10 eadl4387

[29] [29] Webber M J and Tibbitt M W 2022 Dynamic and reconfigurable materials from reversible network interactions Nat. Rev. Mater.7 541–56

[30] [30] Machado T O, Stubbs C J, Chiaradia V, Alraddadi M A, Brandolese A, Worch J C and Dove A P 2024 A renewably sourced, circular photopolymer resin for additive manufacturing Nature629 1069–74

[31] [31] Liang C, Cui J J, Sun Y D, Lu Z, Liu F K, Feng S W, Hu G, Cui J and Zhang B 2024 Digital light 3D printed fast- and controlled degradation of covalent hydrogel networks Chem. Eng. J.480 148027

[32] [32] Zhao Q, Qi H J and Xie T 2015 Recent progress in shape memory polymer: new behavior, enabling materials, and mechanistic understanding Prog. Polym. Sci.49–50 79–120

[33] [33] Xia Y L, He Y, Zhang F H, Liu Y J and Leng J S 2021 A review of shape memory polymers and composites: mechanisms, materials, and applications Adv. Mater.33 2000713

[34] [34] Wang X F, He Y, Liu Y J and Leng J S 2022 Advances in shape memory polymers: remote actuation, multi-stimuli control, 4D printing and prospective applications Mater. Sci. Eng. R 151 100702

[35] [35] Lendlein A and Gould O E C 2019 Reprogrammable recovery and actuation behaviour of shape-memory polymers Nat. Rev. Mater.4 116–33

[36] [36] Khalid M Y, Arif Z U, Noroozi R, Zolfagharian A and Bodaghi M 2022 4D printing of shape memory polymer composites: a review on fabrication techniques, applications, and future perspectives J. Manuf. Process.81 759–97

[37] [37] Wang Y, Sachyani Keneth E, Kamyshny A, Scalet G, Auricchio F and Magdassi S 2022 4D multimaterial printing of programmable and selective light-activated shape-memory structures with embedded gold nanoparticles Adv. Mater. Technol.7 2101058

[38] [38] Tekay E, Aybakan B and Aslan V U 2023 4D printable maleated poly(styrene-b-ethylene/butylene-b-styrene)/poly(ethylene-co-vinyl acetate) thermoplastic elastomer blends; effects of blend composition on shape memory and mechanical properties Addit. Manuf.78 103870

[39] [39] Fang Z Z, Lu R Z, Chen J D, Zhao Q and Wu J J 2022 Vat photopolymerization of tough glassy polymers with multiple shape memory performances Addit. Manuf.59 103171

[40] [40] Wang F F, Luo F Z, Huang Y X, Cao X S and Yuan C 2023 4D printing via multispeed fused deposition modeling Adv. Mater. Technol.8 2201383

[41] [41] van Manen T, Janbaz S, Jansen K M B and Zadpoor A A 2021 4D printing of reconfigurable metamaterials and devices Commun. Mater.2 56

[42] [42] Ding Z, Weeger O, Qi H J and Dunn M L 2018 4D rods: 3D structures via programmable 1D composite rods Mater. Des.137 256–65

[43] [43] Zhang Q, Kuang X, Weng S Y, Yue L, Roach D J, Fang D N and Qi H J 2021 Shape-memory balloon structures by pneumatic multi-material 4D printing Adv. Funct. Mater.31 2010872

[44] [44] Chen S Y, Zhang Q L and Feng J C 2017 3D printing of tunable shape memory polymer blends J. Mater. Chem. C 5 8361–5

[45] [45] Wan X, He Y, Liu Y J and Leng J S 2022 4D printing of multiple shape memory polymer and nanocomposites with biocompatible, programmable and selectively actuated properties Addit. Manuf.53 102689

[46] [46] Zhang H et al 2023 Regulation of electrically responsive shape recovery behavior of 4D printed polymers for application in actuators Addit. Manuf.78 103836

[47] [47] Lin C, Xin X Z, Tian L F, Zhang D, Liu L W, Liu Y J and Leng J S 2024 Thermal-, magnetic-, and light-responsive 4D printed SMP composites with multiple shape memory effects and their promising applications Composites B 274 111257

[48] [48] Goo B, Hong C H and Park K 2020 4D printing using anisotropic thermal deformation of 3D-printed thermoplastic parts Mater. Des.188 108485

[49] [49] Koh T Y and Sutradhar A 2022 Untethered selectively actuated microwave 4D printing through ferromagnetic PLA Addit. Manuf.56 102866

[50] [50] Zarna C, Rodrguez-Fabi S, Echtermeyer A T and Chinga-Carrasco G 2022 Preparation and characterisation of biocomposites containing thermomechanical pulp fibres, poly(lactic acid) and poly(butylene-adipate-terephthalate) or poly(hydroxyalkanoates) for 3D and 4D printing Addit. Manuf.59 103166

[51] [51] Ren L Q, Li B Q, Song Z Y, Liu Q P, Ren L and Zhou X L 2019 Bioinspired fiber-regulated composite with tunable permanent shape and shape memory properties via 3D magnetic printing Composites B 164 458–66

[52] [52] Wang Q R, Tian X Y, Huang L, Li D C, Malakhov A V and Polilov A N 2018 Programmable morphing composites with embedded continuous fibers by 4D printing Mater. Des.155 404–13

[53] [53] Zeng C J, Liu L W, Bian W F, Liu Y J and Leng J S 2020 4D printed electro-induced continuous carbon fiber reinforced shape memory polymer composites with excellent bending resistance Composites B 194 108034

[54] [54] Wu J T, Zhao Z A, Kuang X, Hamel C M, Fang D N and Qi H J 2018 Reversible shape change structures by grayscale pattern 4D printing Multifunct. Mater.1 015002

[55] [55] Zhang Y, Huang L M, Song H J, Ni C J, Wu J J, Zhao Q and Xie T 2019 4D printing of a digital shape memory polymer with tunable high performance ACS Appl. Mater. Interfaces11 32408–13

[56] [56] Peng W J et al 2020 Light-coded digital crystallinity patterns toward bioinspired 4D transformation of shape-memory polymers Adv. Funct. Mater.30 2000522

[57] [57] van Manen T, Janbaz S and Zadpoor A A 2017 Programming 2D/3D shape-shifting with hobbyist 3D printers Mater. Horiz.4 1064–9

[58] [58] Ding Z, Yuan C, Peng X R, Wang T J, Qi H J and Dunn M L 2017 Direct 4D printing via active composite materials Sci. Adv.3 e1602890

[59] [59] Cheng J X et al 2022 Centrifugal multimaterial 3D printing of multifunctional heterogeneous objects Nat. Commun.13 7931

[60] [60] Ge Q, Sakhaei A H, Lee H, Dunn C K, Fang N X and Dunn M L 2016 Multimaterial 4D printing with tailorable shape memory polymers Sci. Rep.6 31110

[61] [61] Ren L Q, Li W X, Liu H L, Li B Q, Zhou X L, Ren L, Han Z W, Song Z Y and Liu Q P 2023 Rotational Co-extrusion 4D printing of heterogeneous filaments to enable sophisticated shape morphing Addit. Manuf.73 103661

[62] [62] Wang W, Li C Z, Cho M and Ahn S H 2018 Soft tendril-inspired grippers: shape morphing of programmable polymer-paper bilayer composites ACS Appl. Mater. Interfaces10 10419–27

[63] [63] Yuan C, Wang F F, Qi B Y, Ding Z, Rosen D W and Ge Q 2020 3D printing of multi-material composites with tunable shape memory behavior Mater. Des.193 108785

[64] [64] Moosabeiki V et al 2024 Curvature tuning through defect-based 4D printing Commun. Mater.5 10

[65] [65] Peng B A, Yang Y C, Gu K, Amis E J and Cavicchi K A 2019 Digital light processing 3D printing of triple shape memory polymer for sequential shape shifting ACS Mater. Lett.1 410–7

[66] [66] Wang L L, Zhang F H, Du S Y and Leng J S 2023 4D printing of triple-shape memory cyanate composites based on interpenetrating polymer network structures ACS Appl. Mater. Interfaces15 21496–506

[67] [67] Li H Z, Gao X and Luo Y W 2016 Multi-shape memory polymers achieved by the spatio-assembly of 3D printable thermoplastic building blocks Soft Matter12 3226–33

[68] [68] Rossegger E, Hller R, Reisinger D, Fleisch M, Strasser J, Wieser V, Griesser T and Schlgl S 2021 High resolution additive manufacturing with acrylate based vitrimers using organic phosphates as transesterification catalyst Polymer221 123631

[69] [69] Rossegger E, Hller R, Reisinger D, Strasser J, Fleisch M, Griesser T and Schlgl S 2021 Digital light processing 3D printing with thiol–acrylate vitrimers Polym. Chem.12 639–44

[70] [70] Inverardi N, Pandini S, Bignotti F, Scalet G, Marconi S and Auricchio F 2020 Sequential motion of 4D printed photopolymers with broad glass transition Macromol. Mater. Eng.305 1900370

[71] [71] Zhou K, Sun R, Wojciechowski J P, Wang R, Yeow J, Zuo Y, Song X, Wang C, Shao Y and Stevens M M 2024 4D multimaterial printing of soft actuators with spatial and temporal control Adv. Mater.36 2312135

[72] [72] Huang S et al 2023 Digital light processing 4D printing multilayer polymers with tunable mechanical properties and shape memory behavior Chem. Eng. J.465 142830

[73] [73] Wang K J, Jia Y G, Zhao C Z and Zhu X X 2019 Multiple and two-way reversible shape memory polymers: design strategies and applications Prog. Mater. Sci.105 100572

[74] [74] Zare M, Prabhakaran M P, Parvin N and Ramakrishna S 2019 Thermally-induced two-way shape memory polymers: mechanisms, structures, and applications Chem. Eng. J.374 706–20

[75] [75] Finkelmann H, Benn J and Semmler K 1995 Smectic liquid single crystal elastomers Macromol. Symp.96 169

[76] [76] Bonetti L, Natali D, Pandini S, Messori M, Toselli M and Scalet G 2024 4D printing of semi-crystalline crosslinked polymer networks with two-way shape-memory effect Mater. Des.238 112725

[77] [77] Wang Y and Li X 2021 4D-printed bi-material composite laminate for manufacturing reversible shape-change structures Composites B 219 108918

[78] [78] Shi Y P, Fang G Q, Cao Z L, Shi F Z, Zhao Q, Fang Z Z and Xie T 2021 Digital light fabrication of reversible shape memory polymers Chem. Eng. J.426 131306

[79] [79] Behl M, Kratz K, Zotzmann J, Nchel U and Lendlein A 2013 Reversible bidirectional shape-memory polymers Adv. Mater.25 4466–9

[80] [80] Behl M, Kratz K, Noechel U, Sauter T and Lendlein A 2013 Temperature-memory polymer actuators Proc. Natl Acad. Sci. USA110 12555–9

[81] [81] Chen G C, Dong J T, Xu X N, Zou W K, Jin B J, Peng W J, Zhao Q, Xie T and Zheng N 2022 Converse two-way shape memory effect through a dynamic covalent network design J. Mater. Chem. A 10 10350–4

[82] [82] Roach D J, Sun X H, Peng X R, Demoly F, Zhou K and Qi H J 2022 4D printed multifunctional composites with cooling-rate mediated tunable shape morphing Adv. Funct. Mater.32 2203236

[83] [83] Lee A Y, An J, Chua C K and Zhang Y 2019 Preliminary investigation of the reversible 4D printing of a dual-layer component Engineering5 1159–70

[84] [84] Wang Y and Li X 2021 4D printing reversible actuator with strain self-sensing function via structural design Composites B 211 108644

[85] [85] Wang X F, He Y and Leng J S 2023 Bionic shape memory polyurethane/Prussian blue nanoparticle-based actuators with two-way and programmable light-driven motions ACS Appl. Polym. Mater.5 1398–408

[86] [86] Mao Y Q, Ding Z, Yuan C, Ai S G, Isakov M, Wu J T, Wang T J, Dunn M L and Qi H J 2016 3D printed reversible shape changing components with stimuli responsive materials Sci. Rep.6 24761

[87] [87] Li H, Liang X Y and Song W B 2019 Buckling-controlled two-way shape memory effect in a ring-shaped bilayer Acta Mech. Sin.35 1217–25

[88] [88] Kim D, Lee H S and Yoon J 2016 Highly bendable bilayer-type photo-actuators comprising of reduced graphene oxide dispersed in hydrogels Sci. Rep.6 20921

[89] [89] Chen S J, Hu J L and Zhuo H T 2010 Properties and mechanism of two-way shape memory polyurethane composites Compos. Sci. Technol.70 1437–43

[90] [90] Lee A Y, Zhou A W, An J, Chua C K and Zhang Y 2020 Contactless reversible 4D-printing for 3D-to-3D shape morphing Virtual Phys. Prototyp.15 481–95

[91] [91] Wu S, Ze Q J, Zhang R D, Hu N, Cheng Y, Yang F Y and Zhao R K 2019 Symmetry-breaking actuation mechanism for soft robotics and active metamaterials ACS Appl. Mater. Interfaces11 41649–58

[92] [92] Jiang S J et al 2019 Multifunctional Janus microplates arrays actuated by magnetic fields for water/light switches and bio-inspired assimilatory coloration Adv. Mater.31 1807507

[93] [93] Chang L F, Wang D P, Huang Z S, Wang C F, Torop J, Li B, Wang Y J, Hu Y and Aabloo A 2023 A versatile ionomer-based soft actuator with multi-stimulus responses, self-sustainable locomotion, and photoelectric conversion Adv. Funct. Mater.33 2212341

[94] [94] Zou B H, Liang Z H, Zhong D J, Cui Z M, Xiao K, Shao S and Ju J 2023 Magneto-thermomechanically reprogrammable mechanical metamaterials Adv. Mater.35 2207349

[95] [95] Gao Y, Liu W F and Zhu S P 2019 Thermoplastic polyolefin elastomer blends for multiple and reversible shape memory polymers Ind. Eng. Chem. Res.58 19495–502

[96] [96] Song H J, Fang Z Z, Jin B J, Pan P J, Zhao Q and Xie T 2019 Synergetic chemical and physical programming for reversible shape memory effect in a dynamic covalent network with two crystalline phases ACS Macro Lett.8 682–6

[97] [97] Wong J-W et al 2023 Sustainable approach for the synthesis of a semicrystalline polymer with a reversible shape-memory effect ACS Macro Lett.12 563–9

[98] [98] Yang G, Li H Q, Xing R Q, Lv M D, Ma C Q, Yan J and Zhuang X P 2023 Thermal-triggered “on–off” switchable triboelectric nanogenerator based on two-way shape memory polymer Adv. Funct. Mater.33 2214001

[99] [99] Yuan W H, Liu K K, Zhou J, Ni L L, Shan G R, Bao Y Z and Pan P J 2020 Stress-free two-way shape memory effects of semicrystalline polymer networks enhanced by self-nucleated crystallization ACS Macro Lett.9 1325–31

[100] [100] Li S Y et al 2023 4D printed thermoplastic polyamide elastomers with reversible two-way shape memory effect Adv. Mater. Technol.8 2202066

[101] [101] Jiang Y X, Leng Q Y, Yan Y J, Ng E L L, Chee H L, Wang F K, Chan S Y, Loh X J, Wang J and Chan B Q Y 2022 4D printing of single-network shape memory polyurethanes with two-way actuation properties ACS Appl. Polym. Mater.4 8574–83

[102] [102] Tobushi H, Hashimoto T, Hayashi S and Yamada E 1997 Thermomechanical constitutive modeling in shape memory polymer of polyurethane series J. Intell. Mater. Syst. Struct.8 711–8

[103] [103] Liu Y P, Gall K, Dunn M L, Greenberg A R and Diani J 2006 Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling Int. J. Plast.22 279–313

[104] [104] Zhao F, Zheng X Y, Zhou S C, Zhou B, Xue S F and Zhang Y 2021 Constitutive model for epoxy shape memory polymer with regulable phase transition temperature Int. J. Smart Nano Mater.12 72–87

[105] [105] Qi H J, Nguyen T D, Castro F, Yakacki C M and Shandas R 2008 Finite deformation thermo-mechanical behavior of thermally induced shape memory polymers J. Mech. Phys. Solids56 1730–51

[106] [106] Kim J H, Kang T J and Yu W R 2010 Thermo-mechanical constitutive modeling of shape memory polyurethanes using a phenomenological approach Int. J. Plast.26 204–18

[107] [107] Baghani M, Naghdabadi R, Arghavani J and Sohrabpour S 2012 A thermodynamically-consistent 3 D constitutive model for shape memory polymers Int. J. Plast.35 13–30

[108] [108] Yarali E, Taheri A and Baghani M 2020 A comprehensive review on thermomechanical constitutive models for shape memory polymers J. Intell. Mater. Syst. Struct.31 1243–83

[109] [109] Shojaei A, Xu W, Yan C, Yang Q X and Li G Q 2022 Insight in thermomechanical constitutive modeling of shape memory polymers Front. Mech. Eng.8 956129

[110] [110] Huang R, Zheng S J, Liu Z S and Ng T Y 2020 Recent advances of the constitutive models of smart materials—hydrogels and shape memory polymers Int. J. Appl. Mech.12 2050014

[111] [111] Athinarayanarao D, Prod'hon R, Chamoret D, Qi H J, Bodaghi M, Andr J C and Demoly F 2023 Computational design for 4D printing of topology optimized multi-material active composites npj Comput. Mater.9 1

[112] [112] Sigmund O and Maute K 2013 Topology optimization approaches Struct. Multidiscip. Optim.48 1031–55

[113] [113] Maute K, Tkachuk A, Wu J T, Qi H J, Ding Z and Dunn M L 2015 Level set topology optimization of printed active composites J. Mech. Des.137 111402

[114] [114] Lumpe T S and Shea K 2021 Computational design of 3D-printed active lattice structures for reversible shape morphing J. Mater. Res.36 3642–55

[115] [115] Liu J K et al 2018 Current and future trends in topology optimization for additive manufacturing Struct. Multidiscip. Optim.57 2457–83

[116] [116] Geiss M J, Boddeti N, Weeger O, Maute K and Dunn M L 2019 Combined level-set-XFEM-density topology optimization of four-dimensional printed structures undergoing large deformation J. Mech. Des.141 051405

[117] [117] Yu Y X, Qian K R, Yang H, Yao L N and Zhang Y J 2022 Hybrid IGA-FEA of fiber reinforced thermoplastic composites for forward design of AI-enabled 4D printing J. Mater. Process. Technol.302 117497

[118] [118] de Kergariou C, Kim B C, Perriman A, Le Duigou A, Guessasma S and Scarpa F 2022 Design of 3D and 4D printed continuous fibre composites via an evolutionary algorithm and voxel-based finite elements: application to natural fibre hygromorphs Addit. Manuf.59 103144

[119] [119] Hosseinzadeh M, Ghoreishi M and Narooei K 2023 4D printing of shape memory polylactic acid beams: an experimental investigation into FDM additive manufacturing process parameters, mathematical modeling, and optimization J. Manuf. Process.85 774–82

[120] [120] Zolfagharian A, Durran L, Gharaie S, Rolfe B, Kaynak A and Bodaghi M 2021 4D printing soft robots guided by machine learning and finite element models Sens. Actuators A 328 112774

[121] [121] Tang K K, Xiang Y J, Tian J, Hou J X, Chen X Y, Wang X Q and Zhong Z 2024 Machine learning-based morphological and mechanical prediction of kirigami-inspired active composites Int. J. Mech. Sci.266 108956

[122] [122] Sossou G, Demoly F, Belkebir H, Qi H J, Gomes S and Montavon G 2019 Design for 4D printing: modeling and computation of smart materials distributions Mater. Des.181 108074

[123] [123] Ji Q L, Chen M, Wang X V, Wang L H and Feng L 2022 Optimal shape morphing control of 4D printed shape memory polymer based on reinforcement learning Robot. Comput. Integr. Manuf.73 102209

[124] [124] Peng X, Liu G A, Wang J, Li J Q, Wu H P, Jiang S F and Yi B 2023 Controllable deformation design for 4D-printed active composite structure: optimization, simulation, and experimental verification Compos. Sci. Technol.243 110265

[125] [125] Benyahia K, Seriket H, Prod'hon R, Gomes S, Andr J C, Qi H J and Demoly F 2022 A computational design approach for multi-material 4D printing based on interlocking blocks assembly Addit. Manuf.58 102993

[126] [126] Wang J G, Zhang Y Z, Zheng J C, Zhao X B, Guo H J, Qiu Y, Wang X D, Liu L Q and Yu H B 2023 A 4D-printing inverse design strategy for micromachines with customized shape-morphing Small19 2302656

[127] [127] Sun X H, Yu L X, Yue L, Zhou K, Demoly F, Zhao R R and Qi H J 2024 Machine learning and sequential subdomain optimization for ultrafast inverse design of 4D-printed active composite structures J. Mech. Phys. Solids186 105561

[128] [128] Hamel C M, Roach D J, Long K N, Demoly F, Dunn M L and Qi H J 2019 Machine-learning based design of active composite structures for 4D printing Smart Mater. Struct.28 065005

[129] [129] Sun X H, Yue L, Yu L X, Shao H, Peng X R, Zhou K, Demoly F, Zhao R K and Qi H J 2022 Machine learning-evolutionary algorithm enabled design for 4D-printed active composite structures Adv. Funct. Mater.32 2109805

[130] [130] Zhao Z, Wu J T, Mu X M, Chen H S, Qi H J and Fang D N 2017 Origami by frontal photopolymerization Sci. Adv.3 e1602326

[131] [131] Liu C, Tan Y Z, He C W, Ji S B and Xu H P 2021 Unconstrained 3D shape programming with light-induced stress gradient Adv. Mater.33 2105194

[132] [132] Shao Y C, Long F, Zhao Z, Fang M, Jing H, Guo J, Shi X, Sun A, Xu G and Cheng Y 2023 4D printing light-driven soft actuators based on liquid-vapor phase transition composites with inherent sensing capability Chem. Eng. J.454 140271

[133] [133] Nguyen T D, Qi H J, Castro F and Long K N 2008 A thermoviscoelastic model for amorphous shape memory polymers: incorporating structural and stress relaxation J. Mech. Phys. Solids56 2792–814

[134] [134] Li G Q and Wang A Q 2016 Cold, warm, and hot programming of shape memory polymers J. Polym. Sci. B 54 1319–39

[135] [135] Shahi K and Ramachandran V 2022 Theoretical and experimental investigation of shape memory polymers programmed below glass transition temperature Polymers14 2753

[136] [136] Dong K, Wang Y H, Wang Z H, Qiu W L, Zheng P and Xiong Y 2023 Reusability and energy absorption behavior of 4D printed continuous fiber-reinforced auxetic composite structures Composites A 169 107529

[137] [137] Namvar N, Zolfagharian A, Vakili-Tahami F and Bodaghi M 2022 Reversible energy absorption of elasto-plastic auxetic, hexagonal, and AuxHex structures fabricated by FDM 4D printing Smart Mater. Struct.31 055021

[138] [138] Mehrpouya M, Edelijn T, Ibrahim M, Mohebshahedin A, Gisario A and Barletta M 2022 Functional behavior and energy absorption characteristics of additively manufactured smart sandwich structures Adv. Eng. Mater.24 2200677

[139] [139] Aberoumand M, Soltanmohammadi K, Rahmatabadi D, Soleyman E, Ghasemi I, Baniassadi M, Abrinia K, Bodaghi M and Baghani M 2023 4D printing of polyvinyl chloride (PVC): a detailed analysis of microstructure, programming, and shape memory performance Macromol. Mater. Eng.308 2200677

[140] [140] Yue L, Sun X H, Yu L X, Li M Z, Montgomery S M, Song Y Y, Nomura T, Tanaka M and Qi H J 2023 Cold-programmed shape-morphing structures based on grayscale digital light processing 4D printing Nat. Commun.14 5519

[141] [141] Soleyman E, Rahmatabadi D, Soltanmohammadi K, Aberoumand M, Ghasemi I, Abrinia K, Baniassadi M, Wang K and Baghani M 2022 Shape memory performance of PETG 4D printed parts under compression in cold, warm, and hot programming Smart Mater. Struct.31 085002

[142] [142] Soleyman E, Rahmatabadi D, Aberoumand M, Soltanmohammadi K, Ghasemi I, Baniassadi M, Abrinia K and Baghani M 2024 Cold programming of ordered porous PETG 4D printed by material extrusion Arch. Civ. Mech. Eng.24 67

[143] [143] Rahmatabadi D, Ghasemi I, Baniassadi M, Abrinia K and Baghani M 2023 4D printing of PLA-TPU blends: effect of PLA concentration, loading mode, and programming temperature on the shape memory effect J. Mater. Sci.58 7227–43

[144] [144] Fallah A, Asif S, Gokcer G and Koc B 2023 4D printing of continuous fiber-reinforced electroactive smart composites by coaxial additive manufacturing Compos. Struct.316 117034

[145] [145] Bodaghi M, Serjouei A, Zolfagharian A, Fotouhi M, Rahman H and Durand D 2020 Reversible energy absorbing meta-sandwiches by FDM 4D printing Int. J. Mech. Sci.173 105451

[146] [146] Aberoumand M, Rahmatabadi D, Soltanmohammadi K, Soleyman E, Ghasemi I, Baniassadi M, Abrinia K, Bodaghi M and Baghani M 2023 Stress recovery and stress relaxation behaviors of PVC 4D printed by FDM technology for high-performance actuation applications Sens. Actuators A 361 114572

[147] [147] Delaey J, Dubruel P and Van Vlierberghe S 2020 Shape-memory polymers for biomedical applications Adv. Funct. Mater.30 1909047

[148] [148] Xie H, Yang K K and Wang Y Z 2019 Photo-cross-linking: a powerful and versatile strategy to develop shape-memory polymers Prog. Polym. Sci.95 32–64

[149] [149] Hornat C C and Urban M W 2020 Shape memory effects in self-healing polymers Prog. Polym. Sci.102 101208

[150] [150] Zhou Y F, Wei G, Yuan J Z, Sang X X, Miao J T and Liu R 2023 UV-assisted direct ink writing 4D printing of benzoxazine/epoxy thermosets Chem. Eng. J.477 147221

[151] [151] Feng P, Zhao R Y, Yang F, Peng S P, Pan H and Shuai C J 2024 Co-continuous structure enhanced magnetic responsive shape memory PLLA/TPU blend fabricated by 4D printing Virtual Phys. Prototyp.19 e2290186

[152] [152] Tang Z Z, Gong J H, Cao P R, Tao L M, Pei X Q, Wang T M, Zhang Y M, Wang Q H and Zhang J Q 2022 3D printing of a versatile applicability shape memory polymer with high strength and high transition temperature Chem. Eng. J.431 134211

[153] [153] Shuai C J, Xu W T, He H F, Yang F, Liu J L and Feng P 2024 Layered co-continuous structure in bone scaffold fabricated by laser additive manufacturing for enhancing electro-responsive shape memory properties J. Mater. Res. Technol.30 61–69

[154] [154] Ramaraju H, Akman R E, Safranski D L and Hollister S J 2020 Designing biodegradable shape memory polymers for tissue repair Adv. Funct. Mater.30 2002014

[155] [155] Liu C, Qin H and Mather P T 2007 Review of progress in shape-memory polymers J. Mater. Chem.17 1543–58

[156] [156] Hager M D, Bode S, Weber C and Schubert U S 2015 Shape memory polymers: past, present and future developments Prog. Polym. Sci.49–50 3–33

[157] [157] Behl M, Razzaq M Y and Lendlein A 2010 Multifunctional shape-memory polymers Adv. Mater.22 3388–410

[158] [158] Qi X, Zhang J C, Zhang L Q and Yue D M 2021 Bio-based, robust, shape memory, self-healing and recyclable elastomers based on a semi-interpenetrating dynamic network J. Mater. Chem. A 9 25399–407

[159] [159] Liu R Y et al 2018 Shape memory polymers for body motion energy harvesting and self-powered mechanosensing Adv. Mater.30 1705195

[160] [160] Zheng Y, Zeng B B, Yang L H, Shen J B and Guo S Y 2020 Fabrication of thermoplastic polyurethane/polycaprolactone multilayered composites with confined distribution of MWCNTs for achieving tunable thermo- and electro-responsive shape-memory performances Ind. Eng. Chem. Res.59 2977–87

[161] [161] Zheng Y, Qin J X, Shen J B and Guo S Y 2020 Controllable distribution of conductive particles in polymer blends via a bilayer structure design: a strategy to fabricate shape-memory composites with tunable electro-responsive properties J. Mater. Chem. C 8 9593–601

[162] [162] Zheng Y, Dong R Q, Shen J B and Guo S Y 2016 Tunable shape memory performances via multilayer assembly of thermoplastic polyurethane and polycaprolactone ACS Appl. Mater. Interfaces8 1371–80

[163] [163] Zeng B B, Yang L H, Qin J X, Zheng Y and Guo S Y 2020 Nacre-inspired polymeric materials with body heat-responsive shape-memory effect, high optical transparence, and balanced mechanical properties ACS Appl. Mater. Interfaces12 52008–17

[164] [164] Du J, Armstrong S R and Baer E 2013 Co-extruded multilayer shape memory materials: comparing layered and blend architectures Polymer54 5399–407

[165] [165] Wang L L, Zhang F H, Du S Y and Leng J S 2022 4D printing of shape-changing structures based on IPN epoxy composites formed by UV post-curing and -ray radiation Composites A 162 107146

[166] [166] Wu P, Yu T Y, Chen M J, Kang N and El Mansori M 2024 Electrically/magnetically dual-driven shape memory composites fabricated by multi-material magnetic field-assisted 4D printing Adv. Funct. Mater.34 2314854

[167] [167] Li Z L, Yu R and Guo B L 2021 Shape-memory and self-healing polymers based on dynamic covalent bonds and dynamic noncovalent interactions: synthesis, mechanism, and application ACS Appl. Bio Mater.4 5926–43

[168] [168] Xia D Y, Wang P, Ji X F, Khashab N M, Sessler J L and Huang F H 2020 Functional supramolecular polymeric networks: the marriage of covalent polymers and macrocycle-based host-guest interactions Chem. Rev.120 6070–123

[169] [169] Lehn J M 2005 Dynamers: dynamic molecular and supramolecular polymers Prog. Polym. Sci.30 814–31

[170] [170] Kloxin C J, Scott T F, Adzima B J and Bowman C N 2010 Covalent adaptable networks (CANs): a unique paradigm in cross-linked polymers Macromolecules43 2643–53

[171] [171] Montarnal D, Capelot M, Tournilhac F and Leibler L 2011 Silica-like malleable materials from permanent organic networks Science334 965–8

[172] [172] Zou W K, Dong J T, Luo Y W, Zhao Q and Xie T 2017 Dynamic covalent polymer networks: from old chemistry to modern day innovations Adv. Mater.29 1606100

[173] [173] Williams G T, Haynes C J E, Fares M, Caltagirone C, Hiscock J R and Gale P A 2021 Advances in applied supramolecular technologies Chem. Soc. Rev.50 2737–63

[174] [174] Yan X Z, Wang F, Zheng B and Huang F H 2012 Stimuli-responsive supramolecular polymeric materials Chem. Soc. Rev.41 6042–65

[175] [175] Peng H Q, Zhu W P, Guo W J, Li Q Y, Ma S X, Bucher C, Liu B, Ji X F, Huang F H and Sessler J L 2023 Supramolecular polymers: recent advances based on the types of underlying interactions Prog. Polym. Sci.137 101635

[176] [176] Wanasinghe S V, Dodo O J and Konkolewicz D 2022 Dynamic bonds: adaptable timescales for responsive materials Angew. Chem., Int. Ed.61 e202206938

[177] [177] Zheng N, Xu Y, Zhao Q and Xie T 2021 Dynamic covalent polymer networks: a molecular platform for designing functions beyond chemical recycling and self-healing Chem. Rev.121 1716–45

[178] [178] Peng S Y, Sun Y, Ma C M, Duan G G, Liu Z Z and Ma C X 2022 Recent advances in dynamic covalent bond-based shape memory polymers e-Polymers22 285–300

[179] [179] Zhao X L, Tian P X, Li Y D and Zeng J B 2022 Biobased covalent adaptable networks: towards better sustainability of thermosets Green Chem.24 4363–87

[180] [180] Cui J J, Liu F K, Lu Z, Feng S W, Liang C, Sun Y D, Cui J and Zhang B 2023 Repeatedly recyclable 3D printing catalyst-free dynamic thermosetting photopolymers Adv. Mater.35 2211417

[181] [181] Jiang Z C, Xiao Y Y, Kang Y, Pan M, Li B J and Zhang S 2017 Shape memory polymers based on supramolecular interactions ACS Appl. Mater. Interfaces9 20276–93

[182] [182] Jiang Z, Bhaskaran A, Aitken H M, Shackleford I C G and Connal L A 2019 Using synergistic multiple dynamic bonds to construct polymers with engineered properties Macromol. Rapid Commun.40 1900038

[183] [183] He X, Lin Y C, Ding Y C, Abdullah A M, Lei Z P, Han Y B, Shi X J, Zhang W and Yu K 2022 Reshapeable, rehealable and recyclable sensor fabricated by direct ink writing of conductive composites based on covalent adaptable network polymers Int. J. Extrem. Manuf.4 015301

[184] [184] Fan L F, Rong M Z, Zhang M Q and Chen X D 2018 Repeated intrinsic self-healing of wider cracks in polymer via dynamic reversible covalent bonding molecularly combined with a two-way shape memory effect ACS Appl. Mater. Interfaces10 38538–46

[185] [185] Li X J, Wang L L, Li Y W and Xu S F 2023 Reprocessable, self-healing, thermadapt shape memory polycaprolactone via robust ester–ester interchanges toward kirigami-tailored 4D medical devices ACS Appl. Polym. Mater.5 1585–95

[186] [186] Miao W S, Zou W K, Jin B J, Ni C J, Zheng N, Zhao Q and Xie T 2020 On demand shape memory polymer via light regulated topological defects in a dynamic covalent network Nat. Commun.11 4257

[187] [187] Miao W S, Zou W K, Luo Y W, Zheng N, Zhao Q and Xie T 2020 Structural tuning of polycaprolactone based thermadapt shape memory polymer Polym. Chem.11 1369–74

[188] [188] Meurer J, Hniopek J, Btz T, Zechel S, Enke M, Vitz J, Schmitt M, Popp J, Hager M D and Schubert U S 2021 Shape-memory metallopolymers based on two orthogonal metal-ligand interactions Adv. Mater.33 2006655

[189] [189] Ahn D et al 2022 Controllable physical synergized triboelectricity, shape memory, self-healing, and optical sensing with rollable form factor by Zn cluster Adv. Sci.9 2200441

[190] [190] Ni C J et al 2023 Shape memory polymer with programmable recovery onset Nature622 748–53

[191] [191] Cui C H, An L, Zhang Z L, Ji M K, Chen K, Yang Y X, Su Q, Wang F, Cheng Y L and Zhang Y F 2022 Reconfigurable 4D printing of reprocessable and mechanically strong polythiourethane covalent adaptable networks Adv. Funct. Mater.32 2203720

[192] [192] Xu X N, Fang Z Z, Jin B J, Mu H F, Shi Y P, Xu Y, Chen G C, Zhao Q, Zheng N and Xie T 2023 Regenerative living 4D printing via reversible growth of polymer networks Adv. Mater.35 2209824

[193] [193] Chen J Y, Wang Z F, Yao B W, Geng Y H, Wang C, Xu J H, Chen T, Jing J J and Fu J J 2024 Ultra-highly stiff and tough shape memory polyurea with unprecedented energy density by precise slight cross-linking Adv. Mater.36 2401178

[194] [194] Peng W J, Zhang G G, Zhao Q and Xie T 2021 Autonomous off-equilibrium morphing pathways of a supramolecular shape-memory polymer Adv. Mater.33 2102473

[195] [195] Yang X et al 2022 A repeatable dual-encryption platform from recyclable thermosets with self-healing ability and shape memory effect Adv. Funct. Mater.32 2205177

[196] [196] Miao J T, Ge M Y, Peng S Q, Zhong J, Li Y W, Weng Z X, Wu L X and Zheng L H 2019 Dynamic imine bond-based shape memory polymers with permanent shape reconfigurability for 4D printing ACS Appl. Mater. Interfaces11 40642–51

[197] [197] Joe J et al 2021 A 4D printable shape memory vitrimer with repairability and recyclability through network architecture tailoring from commercial poly(-caprolactone) Adv. Sci.8 2103682

[198] [198] Choi S, Park B, Jo S, Seo J H, Lee W, Kim D G, Lee K B, Kim Y S and Park S 2022 Weldable and reprocessable shape memory epoxy vitrimer enabled by controlled formulation for extrusion-based 4D printing applications Adv. Eng. Mater.24 2101497

[199] [199] Tran H B D, Vazquez-martel C, Catt S O, Jia Y X, Tsotsalas M, Spiegel C A and Blasco E 2024 4D printing of adaptable “living” materials based on alkoxyamine chemistry Adv. Funct. Mater.34 2315238

[200] [200] Liu S, Dong X X, Wang Y X, Xiong J, Guo R, Xiao J F, Sun C F, Zhai F and Wang X L 2023 4D printing of shape memory epoxy for adaptive dynamic components Adv. Mater. Technol.8 2202004

[201] [201] Tournier P, Saint-p G, Lagneau N, Loll F, Halgand B, Tessier A, Guicheux J, Le Visage C and Delplace V 2023 Clickable dynamic bioinks enable post-printing modifications of construct composition and mechanical properties controlled over time and space Adv. Sci.10 2300055

[202] [202] Li Z et al 2024 Self-healing and shape memory reconfigurable poly(urethane-urea-amide) elastomers containing multiple dynamic bonds for improving performance of 4D printout Chem. Eng. J.485 149933

[203] [203] Es Sayed J, Khoonkari M, Oggioni M, Perrin P, Sanson N, Kamperman M and Wodarczyk-biegun M K 2022 Multi-responsive jammed micro-gels ink: toward control over the resolution and the stability of 3D printed scaffolds Adv. Funct. Mater.32 2207816

[204] [204] Wang J, Lin X, Wang R G, Lu Y L and Zhang L Q 2023 Self-healing, photothermal-responsive, and shape memory polyurethanes for enhanced mechanical properties of 3D/4D printed objects Adv. Funct. Mater.33 2211579

[205] [205] Cheng C Y, Xie H, Xu Z Y, Li L, Jiang M N, Tang L, Yang K K and Wang Y Z 2020 4D printing of shape memory aliphatic copolyester via UV-assisted FDM strategy for medical protective devices Chem. Eng. J.396 125242

[206] [206] Wang Y H, Ye H T, He J, Ge Q and Xiong Y 2024 Electrothermally controlled origami fabricated by 4D printing of continuous fiber-reinforced composites Nat. Commun.15 2322

[207] [207] Shuai C J, Wang Z C, Yang F, Zhang H Y, Liu J L and Feng P 2023 Laser additive manufacturing of shape memory biopolymer bone scaffold: 3D conductive network construction and electrically driven mechanism J. Adv. Res. accepted (https://doi.org/10.1016/j.jare.2023.11.031)

[208] [208] Wang W H, Wang S, Zhou J Y, Deng H X, Sun S S, Xue T, Ma Y Q and Gong X L 2023 Bio-inspired semi-active safeguarding design with enhanced impact resistance via shape memory effect Adv. Funct. Mater.33 2212093

[209] [209] Liu H, Wang F F, Wu W Y, Dong X F and Sang L 2023 4D printing of mechanically robust PLA/TPU/Fe3O4 magneto-responsive shape memory polymers for smart structures Composites B 248 110382

[210] [210] Zhang F H, Wen N, Wang L L, Bai Y and Leng J S 2021 Design of 4D printed shape-changing tracheal stent and remote controlling actuation Int. J. Smart Nano Mater.12 375–89

[211] [211] Zhang F H, Wang L L, Zheng Z C, Liu Y J and Leng J S 2019 Magnetic programming of 4D printed shape memory composite structures Composites A 125 105571

[212] [212] Paunovi N et al 2022 Digital light 3D printed bioresorbable and NIR-responsive devices with photothermal and shape-memory functions Adv. Sci.9 2200907

[213] [213] Yang H, Leow W R, Wang T, Wang J, Yu J C, He K, Qi D P, Wan C J and Chen X D 2017 3D printed photoresponsive devices based on shape memory composites Adv. Mater.29 1701627

[214] [214] Launay V, Wolf R, Dumur F and Laleve J 2022 Photothermal activation in the near infrared range for 4-dimensional printing using relevant organic dyes Addit. Manuf.58 103031

[215] [215] Han B, Zhang Y L, Chen Q D and Sun H B 2018 Carbon-based photothermal actuators Adv. Funct. Mater.28 1802235

[216] [216] Feng S W et al 2024 Photo switchable 4D printing remotely controlled responsive and mimetic deformation shape memory polymer nanocomposites Adv. Funct. Mater.34 2401431

[217] [217] Shuai C J, Wang Z C, Peng S P, Shuai Y, Chen Y W, Zeng D and Feng P 2022 Water-responsive shape memory thermoplastic polyurethane scaffolds triggered at body temperature for bone defect repair Mater. Chem. Front.6 1456–69

[218] [218] Mller L A E, Zingg A, Arcifa A, Zimmermann T, Nystrm G, Burgert I and Siqueira G 2022 Functionalized cellulose nanocrystals as active reinforcements for light-actuated 3D-printed structures ACS Nano16 18210–22

[219] [219] Pan H M and Goto A 2023 Topology-dependent ph-responsive actuation and shape memory programming for biomimetic 4D printing Macromol. Rapid Commun.44 2300074

[220] [220] Qiao Y Q et al 2020 Treatment of MRSA-infected osteomyelitis using bacterial capturing, magnetically targeted composites with microwave-assisted bacterial killing Nat. Commun.11 4446

[221] [221] Huang D Q, Wang J L, Song C H and Zhao Y J 2023 Ultrasound-responsive matters for biomedical applications Innovation4 100421

[222] [222] Sol J A H P, Smits L G, Schenning A P H J and Debije M G 2022 Direct ink writing of 4D structural colors Adv. Funct. Mater.32 2201766

[223] [223] Cecchini L, Mariani S, Ronzan M, Mondini A, Pugno N M and Mazzolai B 2023 4D printing of humidity-driven seed inspired soft robots Adv. Sci.10 2205146

[224] [224] Mller L A E, Zimmermann T, Nystrm G, Burgert I and Siqueira G 2020 Mechanical properties tailoring of 3D printed photoresponsive nanocellulose composites Adv. Funct. Mater.30 2002914

[225] [225] Lu X L, Ambulo C P, Wang S T, Rivera-tarazona L K, Kim H, Searles K and Ware T H 2021 4D-printing of photoswitchable actuators Angew. Chem., Int. Ed.60 5536–43

[226] [226] Zhang X Z, Zhou Q Q, Liu H R and Liu H W 2014 UV light induced plasticization and light activated shape memory of spiropyran doped ethylene-vinyl acetate copolymers Soft Matter10 3748–54

[227] [227] Teng X X, Zhang M, Adhikari B and Ma Y M 2024 4D printed pH-responsive labels of methacrylic anhydride grafted konjac glucomannan for detecting quality changes in respiring climacteric fruits Food Hydrocolloids149 109543

[228] [228] Wang Z J, Liang X, Wang G Y, Wang X H and Chen Y 2023 Emerging bioprinting for wound healing Adv. Mater.11 2304738

[229] [229] Gao L, Akhtar M U, Yang F, Ahmad S, He J K, Lian Q, Cheng W, Zhang J H and Li D C 2021 Recent progress in engineering functional biohybrid robots actuated by living cells Acta Biomater.121 29–40

[230] [230] Fu Z Q, Ouyang L L, Xu R Z, Yang Y and Sun W 2022 Responsive biomaterials for 3D bioprinting: a review Mater. Today52 112–32

[231] [231] Guix M, Mestre R, Patio T, De Corato M, Fuentes J, Zarpellon G and Snchez S 2021 Biohybrid soft robots with self-stimulating skeletons Sci. Robot.6 eabe7577

[232] [232] Wang Y X, Pereira R F, Peach C, Huang B Y, Vyas C and Bartolo P 2023 Robotic in situ bioprinting for cartilage tissue engineering Int. J. Extrem. Manuf.5 032004

[233] [233] Zhou D Z, Dou B H, Kroh F, Wang C Q and Ouyang L L 2023 Biofabrication strategies with single-cell resolution: a review Int. J. Extrem. Manuf.5 042005

[234] [234] Park S, Shou W, Makatura L, Matusik W and Fu K 2022 3D printing of polymer composites: materials, processes, and applications Matter5 43–76

[235] [235] Ligon S C, Liska R, Stampfl J, Gurr M and Mlhaupt R 2017 Polymers for 3D printing and customized additive manufacturing Chem. Rev.117 10212–90

[236] [236] Fu P et al 2022 4D printing of polymers: techniques, materials, and prospects Prog. Polym. Sci.126 101506

[237] [237] Meng H and Hu J L 2010 A brief review of stimulus-active polymers responsive to thermal, light, magnetic, electric, and water/solvent stimuli J. Intell. Mater. Syst. Struct.21 859–85

[238] [238] Ahn S H, Lee K T, Kim H J, Wu R Z, Kim J S and Song S H 2012 Smart soft composite: an integrated 3D soft morphing structure using bend-twist coupling of anisotropic materials Int. J. Precis. Eng. Manuf.13 631–4

[239] [239] Luo M J, Li R D, Zheng D, Kang J T, Wu H T, Deng S H and Niu P D 2023 Formation mechanism of inherent spatial heterogeneity of microstructure and mechanical properties of NiTi SMA prepared by laser directed energy deposition Int. J. Extrem. Manuf.5 035005

[240] [240] Jin Z B Y, Li Y R, Yu K, Liu L X, Fu J Z, Yao X H, Zhang A G and He Y 2021 3D printing of physical organ models: recent developments and challenges Adv. Sci.8 2101394

[241] [241] Jian B C, Li H G, He X N, Wang R, Yang H Y and Ge Q 2024 Two-photon polymerization-based 4D printing and its applications Int. J. Extrem. Manuf.6 012001

[242] [242] Chen D B et al 2020 4D printing strain self-sensing and temperature self-sensing integrated sensor-actuator with bioinspired gradient gaps Adv. Sci.7 2000584

[243] [243] Chen Q Y, Han L, Ren J B, Rong L H, Cao P F and Advincula R C 2020 4D printing via an unconventional fused deposition modeling route to high-performance thermosets ACS Appl. Mater. Interfaces12 50052–60

[244] [244] Li N, Zhao W, Li F F, Liu L W, Liu Y J and Leng J S 2023 A 4D-printed programmable soft network with fractal design and adjustable hydrophobic performance Matter6 940–62

[245] [245] Lin C, Liu L W, Liu Y J and Leng J S 2021 4D printing of bioinspired absorbable left atrial appendage occluders: a proof-of-concept study ACS Appl. Mater. Interfaces13 12668–78

[246] [246] Lin C, Lv J X, Li Y S, Zhang F H, Li J R, Liu Y J, Liu L W and Leng J S 2019 4D-printed biodegradable and remotely controllable shape memory occlusion devices Adv. Funct. Mater.29 1906569

[247] [247] Peng W J, Yin J, Zhang X M, Shi Y P, Che G, Zhao Q and Liu J 2023 4D printed shape memory anastomosis ring with controllable shape transformation and degradation Adv. Funct. Mater.33 2214505

[248] [248] Ren L, Wang Z, Ren L, Liu Q, Li W, Song Z, Li B, Wu Q and Zhou X 2023 4D printing of shape memory composites with remotely controllable local deformation Mater. Today Chem.29 101470

[249] [249] Sang L, Wu W Y, Sun Z Q, Wang F, Xu J, Tian J, Zhao Y P and Zhang H 2023 Reusability and energy absorption behavior of 4D-printed heterogeneous lattice structures based on biomass shape memory polyester J. Mater. Res. Technol.27 1563–78

[250] [250] Wang J J, Hong L Q and Jiao P C 2023 Graphene-reinforced shape memorable chiral metamaterials: theoretical analysis with experimental and numerical validations Mater. Des.226 111648

[251] [251] Wang X L, Zhang Y, Shen P Q, Cheng Z J, Chu C L, Xue F and Bai J 2022 Preparation of 4D printed peripheral vascular stent and its degradation behavior under fluid shear stress after deployment Biomater. Sci.10 2302–14

[252] [252] Yang X C, Chen W H, Liu H Y, Yang B S, Xie Y, Wang Y, Lei Y F and Xue L J 2022 Light-driven shape memory of 3D-printed PEEK for programmable actuations Adv. Mater. Technol.7 2200266

[253] [253] Cen S Y, Li Z H, Guo Z A, Li H R, Shi J Y, Huang X W, Zou X B and Holmes M 2022 4D printing of a citrus pectin/-CD Pickering emulsion: a study on temperature induced color transformation Addit. Manuf.56 102925

[254] [254] Deng Y D, Yang B B, Zhang F H, Liu Y J, Sun J B, Zhang S Q, Zhao Y T, Yuan H P and Leng J S 2022 4D printed orbital stent for the treatment of enophthalmic invagination Biomaterials291 121886

[255] [255] Deng Y D, Zhang F H, Jiang M L, Liu Y J, Yuan H P and Leng J S 2022 Programmable 4D printing of photoactive shape memory composite structures ACS Appl. Mater. Interfaces14 42568–77

[256] [256] Deng Y D, Zhang F H, Liu Y J, Zhang S Q, Yuan H P and Leng J S 2023 4D printed shape memory polyurethane-based composite for bionic cartilage scaffolds ACS Appl. Polym. Mater.5 1283–92

[257] [257] Kuang X, Chen K J, Dunn C K, Wu J T, Li V C F and Qi H J 2018 3D printing of highly stretchable, shape-memory, and self-healing elastomer toward novel 4D printing ACS Appl. Mater. Interfaces10 7381–8

[258] [258] Wei H Q, Cauchy X, Navas I O, Abderrafai Y, Chizari K, Sundararaj U, Liu Y J, Leng J S and Therriault D 2019 Direct 3D printing of hybrid nanofiber-based nanocomposites for highly conductive and shape memory applications ACS Appl. Mater. Interfaces11 24523–32

[259] [259] Wei H Q, Zhang Q W, Yao Y T, Liu L W, Liu Y J and Leng J S 2017 Direct-write fabrication of 4D active shape-changing structures based on a shape memory polymer and its nanocomposite ACS Appl. Mater. Interfaces9 876–83

[260] [260] Zhang C, Cai D P, Liao P, Su J W, Deng H, Vardhanabhuti B, Ulery B D, Chen S Y and Lin J 2021 4D printing of shape-memory polymeric scaffolds for adaptive biomedical implantation Acta Biomater.122 101–10

[261] [261] Wan X, Luo L, Liu Y J and Leng J S 2020 Direct ink writing based 4D printing of materials and their applications Adv. Sci.7 2001000

[262] [262] Choong Y Y C, Maleksaeedi S, Eng H, Wei J and Su P C 2017 4D printing of high performance shape memory polymer using stereolithography Mater. Des.126 219–25

[263] [263] Miao S D, Cui H T, Nowicki M, Xia L, Zhou X, Lee S J, Zhu W, Sarkar K, Zhang Z Y and Zhang L G 2018 Stereolithographic 4D bioprinting of multiresponsive architectures for neural engineering Adv. Biosyst.2 1800101

[264] [264] Kalat M N, Staszczak M, Urbaski L, Polvorinos-Fernndez C, Vega C A, Cristea M, Ionita D, Lantada A D and Pieczyska E A 2023 Investigating a shape memory epoxy resin and its application to engineering shape-morphing devices empowered through kinematic chains and compliant joints Mater. Des.233 112263

[265] [265] Weems A C, Arno M C, Yu W, Huckstepp R T R and Dove A P 2021 4D polycarbonates via stereolithography as scaffolds for soft tissue repair Nat. Commun.12 3771

[266] [266] Deng S H, Huang L M, Wu J J, Pan P J, Zhao Q and Xie T 2021 Bioinspired dual-mode temporal communication via digitally programmable phase-change materials Adv. Mater.33 2008119

[267] [267] Kuhnt T, Camarero-espinosa S, Takhsha Ghahfarokhi M, Arregun M, Cabassi R, Albertini F, Nieto D, Baker M B and Moroni L 2022 4D printed shape morphing biocompatible materials based on anisotropic ferromagnetic nanoparticles Adv. Funct. Mater.32 2202539

[268] [268] Le Fer G and Becker M L 2020 4D printing of resorbable complex shape-memory poly(propylene fumarate) star scaffolds ACS Appl. Mater. Interfaces12 22444–52

[269] [269] Wang Y, Cui H T, Wang Y C, Xu C Y, Esworthy T J, Hann S Y, Boehm M, Shen Y L, Mei D Q and Zhang L G 2021 4D printed cardiac construct with aligned myofibers and adjustable curvature for myocardial regeneration ACS Appl. Mater. Interfaces13 12746–58

[270] [270] Wu H Z, Chen P, Yan C Z, Cai C and Shi Y S 2019 Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing Mater. Des.171 107704

[271] [271] Wu Y, Han Y, Wei Z X, Xie Y, Yin J and Qian J 2023 4D printing of chiral mechanical metamaterials with modular programmability using shape memory polymer Adv. Funct. Mater.33 2306442

[272] [272] Zhang B et al 2021 Mechanically robust and UV-curable shape-memory polymers for digital light processing based 4D printing Adv. Mater.33 2101298

[273] [273] Zhang B, Zhang W, Zhang Z Q, Zhang Y F, Hingorani H, Liu Z J, Liu J and Ge Q 2019 Self-healing four-dimensional printing with an ultraviolet curable double-network shape memory polymer system ACS Appl. Mater. Interfaces11 10328–36

[274] [274] Zhang H, Huang S, Sheng J, Fan L S, Zhou J Z, Shan M Y, Wei J A, Wang C, Yang H W and Lu J Z 2022 4D printing of Ag nanowire-embedded shape memory composites with stable and controllable electrical responsivity: implications for flexible actuators ACS Appl. Nano Mater.5 6221–31

[275] [275] Elliott L V, Salzman E E and Greer J R 2021 Stimuli responsive shape memory microarchitectures Adv. Funct. Mater.31 2008380

[276] [276] Minnick G et al 2023 Two-photon polymerized shape memory microfibers: a new mechanical characterization method in liquid Adv. Funct. Mater.33 2206739

[277] [277] Spratte T, Geiger S, Colombo F, Mishra A, Taale M, Hsu L Y, Blasco E and Selhuber-Unkel C 2023 Increasing the efficiency of thermoresponsive actuation at the microscale by direct laser writing of pNIPAM Adv. Mater. Technol.8 2200714

[278] [278] Wang J Y, Jin F, Dong X Z, Liu J and Zheng M L 2022 Flytrap inspired Ph-driven 3D hydrogel actuator by femtosecond laser microfabrication Adv. Mater. Technol.7 2200276

[279] [279] Wu X Y et al 2022 On-demand editing of surface properties of microstructures made by 3D direct laser writing via photo-mediated RAFT polymerization Adv. Funct. Mater.32 2109446

[280] [280] Zhang W et al 2022 Stiff shape memory polymers for high-resolution reconfigurable nanophotonics Nano Lett.22 8917–24

[281] [281] Mei S X et al 2023 4D printing of polyamide 1212 based shape memory thermoplastic polyamide elastomers by selective laser sintering J. Manuf. Process.92 157–64

[282] [282] Wu H Z, Wang O X, Tian Y J, Wang M Z, Su B, Yan C Z, Zhou K and Shi Y S 2021 Selective laser sintering-based 4D printing of magnetism-responsive grippers ACS Appl. Mater. Interfaces13 12679–88

[283] [283] Tao R, Ji L T, Li Y, Wan Z S, Hu W X, Wu W W, Liao B B, Ma L H and Fang D N 2020 4D printed origami metamaterials with tunable compression twist behavior and stress-strain curves Composites B 201 108344

[284] [284] Wang D, Dong L and Gu G Y 2023 3D printed fractal metamaterials with tunable mechanical properties and shape reconfiguration Adv. Funct. Mater.33 2208849

[285] [285] Wang D, Xu H P, Wang J Q, Jiang C R, Zhu X Y, Ge Q and Gu G Y 2020 Design of 3D printed programmable horseshoe lattice structures based on a phase-evolution model ACS Appl. Mater. Interfaces12 22146–56

[286] [286] Zhang Y F, Li Z H, Li H K, Li H G, Xiong Y, Zhu X Y, Lan H B and Ge Q 2021 Fractal-based stretchable circuits via electric-field-driven microscale 3D printing for localized heating of shape memory polymers in 4D printing ACS Appl. Mater. Interfaces13 41414–23

[287] [287] Gao Z Q, Yin J, Liu P, Li Q, Zhang R, Yang H Y and Zhou H Z 2023 Simultaneous multi-material embedded printing for 3D heterogeneous structures Int. J. Extrem. Manuf.5 035001

[288] [288] Zheng Q Y, Xie B, Xu Z L and Wu H 2023 A systematic printability study of direct ink writing towards high-resolution rapid manufacturing Int. J. Extrem. Manuf.5 035002

[289] [289] Huang Y H et al 2023 A direct laser-synthesized magnetic metamaterial for low-frequency wideband passive microwave absorption Int. J. Extrem. Manuf.5 035503

[290] [290] Rosenbaum C et al 2022 Electro- and photochemical studies of gold (III) bromide towards a novel laser-based method of gold patterning Int. J. Extrem. Manuf.4 035001

[291] [291] Zhang Y X, Wu D, Zhang Y C, Bian Y C, Wang C W, Li J W, Chu J R and Hu Y L 2023 Femtosecond laser direct writing of functional stimulus-responsive structures and applications Int. J. Extrem. Manuf.5 042012

[292] [292] Zou M et al 2023 3D printed fiber-optic nanomechanical bioprobe Int. J. Extrem. Manuf.5 015005

[293] [293] Tumbleston J R et al 2015 Continuous liquid interface production of 3D objects Science347 1349–52

[294] [294] Huang Z Y, Shao G B, Zhou D K, Deng X H, Qiao J and Li L Q 2023 3D printing of high-precision and ferromagnetic functional devices Int. J. Extrem. Manuf.5 035501

[295] [295] Kelly B E, Bhattacharya I, Heidari H, Shusteff M, Spadaccini C M and Taylor H K 2019 Volumetric additive manufacturing via tomographic reconstruction Science363 1075–9

[296] [296] Li W J, Cheng X P, Wang Y and Wang S F 2021 Projection printing of scaffolds with shape recovery capacity and simultaneously improved stiffness and toughness using an ultra-fast-curing poly(propylene fumarate)/hyperbranched additive resin Addit. Manuf.48 102446

[297] [297] Chen L, Duan G H, Zhang C, Cheng P and Wang Z L 2022 3D printed hydrogel for soft thermo-responsive smart window Int. J. Extrem. Manuf.4 025302

[298] [298] Wang Z, Yin Q, Zhan Z, Li W, Xie M, Duan H, Cheng P, Zhang C, Chen Y and Dong Z 2023 Bionic microchannels for step lifting transpiration Int. J. Extrem. Manuf.5 025502

[299] [299] Zhan Z H, Chen L, Duan H G, Chen Y Q, He M and Wang Z L 2022 3D printed ultra-fast photothermal responsive shape memory hydrogel for microrobots Int. J. Extrem. Manuf.4 015302

[300] [300] Zhang W Q, Ye H T, Feng X B, Zhou W Z, Cao K, Li M Y, Fan S F and Lu Y 2022 Tailoring mechanical properties of PSL 3D-printed structures via size effect Int. J. Extrem. Manuf.4 045201

[301] [301] Shuai C J, Wang K D, Peng S P, Zan J, Xiao J, Hu S and Zhong Q 2024 Accelerating Ce3+/Ce4+ conversion in CeO2 via Mn doping to endow scaffolds with chemodynamic therapy properties Surf. Interfaces45 103846

[302] [302] Shuai C J, Shi X X, Wang K, Gu Y L, Yang F and Feng P 2024 Ag-doped CNT/HAP nanohybrids in a PLLA bone scaffold show significant antibacterial activity Bio-Des. Manuf.7 105–20

[303] [303] Qi F W, Liu W, Li Z K, Peng S P, Chen Y Y, Tan W and Shuai C J 2024 Reactive oxygen species responsive nitric oxide release for enhanced photodynamic antibacterial therapy of scaffolds ACS Appl. Polym. Mater.6 6581–93

[304] [304] Qi F W, Li H X, Gao X W, Wang Y F, Qian H Y, Li W, Liu S L, Zhou H R, Peng S P and Shuai C J 2024 Oxygen vacancy healing boosts the piezoelectricity of bone scaffolds Biomater. Sci.12 495–506

[305] [305] Han W, Kong L B and Xu M 2022 Advances in selective laser sintering of polymers Int. J. Extrem. Manuf.4 042002

[306] [306] Meng Z J, Mu X D, He J K, Zhang J L, Ling R and Li D C 2023 Embedding aligned nanofibrous architectures within 3D-printed polycaprolactone scaffolds for directed cellular infiltration and tissue regeneration Int. J. Extrem. Manuf.5 025001

[307] [307] Li M M, Lyu Q Q, Peng B L, Chen X D, Zhang L B and Zhu J T 2022 Bioinspired colloidal photonic composites: fabrications and emerging applications Adv. Mater.34 2110488

[308] [308] Ren L Q, Wu Q, Li J Y, He Y L, Zhang Y L, Zhou X L, Wu S Y, Liu Q P and Li B Q 2024 4D printing of customizable and reconfigurable mechanical metamaterials Int. J. Mech. Sci.270 109112

[309] [309] Xin X Z, Liu L W, Liu Y J and Leng J S 2022 4D pixel mechanical metamaterials with programmable and reconfigurable properties Adv. Funct. Mater.32 2107795

[310] [310] Liu B R et al 2023 4D direct laser writing of submerged structural colors at the microscale Small19 2204630

[311] [311] Liu M X, Fan M Y, Zhu S, Liu W P, Yang L L and Ge D T 2023 Dual manipulation of light and shape based on nanoparticle-induced shape memory composites J. Mater. Chem. C 11 4570–5

[312] [312] Qi Y, Song L J, Zhou C T and Zhang S F 2023 Hydration activates dual-confined shape-memory effects of cold-reprogrammable photonic crystals Adv. Mater.35 2210753

[313] [313] Wang J C, Wang Z G, Song Z Y, Ren L Q, Liu Q P and Ren L 2019 Biomimetic shape–color double-responsive 4D printing Adv. Mater. Technol.4 1900293

[314] [314] Zhang W et al 2021 Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers Nat. Commun.12 112

[315] [315] Spiegel C A, Hackner M, Bothe V P, Spatz J P and Blasco E 2022 4D printing of shape memory polymers: from macro to micro Adv. Funct. Mater.32 2110580

[316] [316] Xu R, Chen C Q, Sun J P, He Y L, Li X, Lu M-H and Chen Y F 2023 The design, manufacture and application of multistable mechanical metamaterials-a state-of-the-art review Int. J. Extrem. Manuf.5 042013

[317] [317] Schmid M, Amado A and Wegener K 2014 Materials perspective of polymers for additive manufacturing with selective laser sintering J. Mater. Res.29 1824–32

[318] [318] Lohse D 2022 Fundamental fluid dynamics challenges in inkjet printing Annu. Rev. Fluid Mech.54 349–82

[319] [319] Qin J R, Feng P P, Wang Y R, Du X L and Song B T 2020 Nanofibrous actuator with an alignment gradient for millisecond-responsive, multidirectional, multimodal, and multidimensional large deformation ACS Appl. Mater. Interfaces12 46719–32

[320] [320] Gu T F, Bi H J, Sun H, Tang J F, Ren Z C, Zhou X Y and Xu M 2023 Design and development of 4D-printed cellulose nanofibers reinforced shape memory polymer composites: application for self-deforming plant bionic soft grippers Addit. Manuf.70 103544

[321] [321] Zhai F, Feng Y Y, Li Z Y, Xie Y X, Ge J, Wang H, Qiu W and Feng W 2021 4D-printed untethered self-propelling soft robot with tactile perception: rolling, racing, and exploring Matter4 3313–26

[322] [322] Ren L Q, He Y L, Ren L, Wang Z G, Zhou X L, Wu Q, Wang K Y, Li B Q and Liu Q P 2023 Multi-parameter-encoded 4D printing of liquid crystal elastomers for programmable shape morphing behaviors Addit. Manuf.61 103376

[323] [323] Podstawczyk D, Nizio M, ledzik P, Simiska-stanny J, Dawiec-liniewska A and Shavandi A 2024 Coaxial 4D printing of vein-inspired thermoresponsive channel hydrogel actuators Adv. Funct. Mater.34 2310514

[324] [324] Li S N, Yang H L, Chen G Q, Zheng J X, Wang W Q, Ren J Y, Zhu C J, Yang Y B, Cong Y and Fu J 2023 4D printing of biomimetic anisotropic self-sensing hydrogel actuators Chem. Eng. J.473 145444

[325] [325] Kim Y, Yuk H, Zhao R K, Chester S A and Zhao X H 2018 Printing ferromagnetic domains for untethered fast-transforming soft materials Nature558 274–9

[326] [326] Deng H, Sattari K, Xie Y C, Liao P, Yan Z and Lin J 2020 Laser reprogramming magnetic anisotropy in soft composites for reconfigurable 3D shaping Nat. Commun.11 6325

[327] [327] Tang T T, Alfarhan S, Jin K L and Li X J 2023 4D printing of seed capsule-inspired hygro-responsive structures via liquid crystal templating-assisted vat photopolymerization Adv. Funct. Mater.33 2211602

[328] [328] Kuang X, Wu J T, Chen K J, Zhao Z, Ding Z, Hu F J Y, Fang D N and Qi H J 2019 Grayscale digital light processing 3D printing for highly functionally graded materials Sci. Adv.5 eaav5790

[329] [329] Nojoomi A, Arslan H, Lee K and Yum K 2018 Bioinspired 3D structures with programmable morphologies and motions Nat. Commun.9 3705

[330] [330] Schwartz J J and Boydston A J 2019 Multimaterial actinic spatial control 3D and 4D printing Nat. Commun.10 791

[331] [331] Qiu W L, He X N, Fang Z M, Wang Y H, Dong K, Zhang G Q, Xu X G, Ge Q and Xiong Y 2023 Shape-tunable 4D printing of LCEs via cooling rate modulation: stimulus-free locking of actuated state at room temperature ACS Appl. Mater. Interfaces15 47509–19

[332] [332] Chen M, Hou Y B, An R, Qi H J and Zhou K 2024 4D printing of reprogrammable liquid crystal elastomers with synergistic photochromism and photoactuation Adv. Mater.36 2303969

[333] [333] Wang Q R, Tian X Y, Zhang D K, Zhou Y L, Yan W Q and Li D C 2023 Programmable spatial deformation by controllable off-center freestanding 4D printing of continuous fiber reinforced liquid crystal elastomer composites Nat. Commun.14 3869

[334] [334] Sydney Gladman A, Matsumoto E A, Nuzzo R G, Mahadevan L and Lewis J A 2016 Biomimetic 4D printing Nat. Mater.15 413–8

[335] [335] Simiska-Stanny J, Nizio M, Szymczyk-Zikowska P, Broyna M, Junka A, Shavandi A and Podstawczyk D 2022 4D printing of patterned multimaterial magnetic hydrogel actuators Addit. Manuf.49 102506

[336] [336] Ma C P, Wu S, Ze Q J, Kuang X, Zhang R D, Qi H J and Zhao R K 2021 Magnetic multimaterial printing for multimodal shape transformation with tunable properties and shiftable mechanical behaviors ACS Appl. Mater. Interfaces13 12639–48

[337] [337] Wu P, Yu T Y and Chen M J 2023 Magnetically-assisted digital light processing 4D printing of flexible anisotropic soft-magnetic composites Virtual Phys. Prototyp.18 e2244924

[338] [338] Ren L Q, Zhou X L, Liu Q P, Liang Y H, Song Z Y, Zhang B Y and Li B Q 2018 3D magnetic printing of bio-inspired composites with tunable mechanical properties J. Mater. Sci.53 14274–86

[339] [339] Kricke J L, Yusnila Khairani I, Beele B B J, Shkodich N, Farle M, Slabon A, Doate-Buenda C and Gkce B 2023 4D printing of magneto-responsive polymer structures by masked stereolithography for miniaturised actuators Virtual Phys. Prototyp.18 e2251017

[340] [340] Zhu Q L, Dai C F, Wagner D, Daab M, Hong W, Breu J, Zheng Q and Wu Z L 2020 Distributed electric field induces orientations of nanosheets to prepare hydrogels with elaborate ordered structures and programmed deformations Adv. Mater.32 2005567

[341] [341] Xue P et al 2021 Near-infrared light-driven shape-morphing of programmable anisotropic hydrogels enabled by MXene nanosheets Angew. Chem., Int. Ed.60 3390–6

[342] [342] Wadsworth P, Nelson I, Porter D L, Raeymaekers B and Naleway S E 2020 Manufacturing bioinspired flexible materials using ultrasound directed self-assembly and 3D printing Mater. Des.185 108243

[343] [343] Berehu H M and Patnaik S 2024 Biogenic zinc oxide nanoparticles synthesized from Tinospora Cordifolia induce oxidative stress, mitochondrial damage and apoptosis in colorectal cancer Nanotheranostics8 312–29

[344] [344] Xu W H et al 2021 3D printing-enabled nanoparticle alignment: a review of mechanisms and applications Small17 2100817

[345] [345] Ren L Q, Li Z S, Liu Q P, Ren L, Wu Q, Li B Q, Li G W, Song Z Y and Zhou X L 2021 Programmable 4D printing of bioinspired solvent-driven morphing composites Adv. Mater. Technol.6 2001289

[346] [346] Goodarzi Hosseinabadi H, Biswas A, Bhusal A, Yousefinejad A, Lall A, Zimmermann W H, Miri A K and Ionov L 2024 4D-printable photocrosslinkable polyurethane-based inks for tissue scaffold and actuator applications Small20 2306387

[347] [347] Ding A X, Lee S J, Ayyagari S, Tang R, Huynh C T and Alsberg E 2022 4D biofabrication via instantly generated graded hydrogel scaffolds Bioact. Mater.7 324–32

[348] [348] Bayles A V, Pleij T, Hofmann M, Hauf F, Tervoort T and Vermant J 2022 Structuring hydrogel cross-link density using hierarchical filament 3D printing ACS Appl. Mater. Interfaces14 15667–77

[349] [349] Liu X J, Li B Y, Gu Z Z and Zhou K 2023 4D printing of butterfly scale-inspired structures for wide-angle directional liquid transport Small19 2207640

[350] [350] Deng C S, Liu Y C, Fan X H, Jiao B Z, Zhang Z X, Zhang M D, Chen F Y, Gao H, Deng L M and Xiong W 2023 Femtosecond laser 4D printing of light-driven intelligent micromachines Adv. Funct. Mater.33 2211473

[351] [351] Jin D D, Chen Q Y, Huang T Y, Huang J Y, Zhang L and Duan H L 2020 Four-dimensional direct laser writing of reconfigurable compound micromachines Mater. Today32 19–25

[352] [352] Huang T Y, Huang H W, Jin D D, Chen Q Y, Huang J Y, Zhang L and Duan H L 2020 Four-dimensional micro-building blocks Sci. Adv.6 eaav8219

[353] [353] Nojoomi A, Jeon J and Yum K 2021 2D material programming for 3D shaping Nat. Commun.12 603

[354] [354] Huang L M, Jiang R Q, Wu J J, Song J Z, Bai H, Li B G, Zhao Q and Xie T 2017 Ultrafast digital printing toward 4D shape changing materials Adv. Mater.29 1605390

[355] [355] Chen K J, Zhang L, Kuang X, Li V, Lei M, Kang G Z, Wang Z L and Qi H J 2019 Dynamic photomask-assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator Adv. Funct. Mater.29 1903568

[356] [356] Rafiee M, Farahani R D and Therriault D 2020 Multi-material 3D and 4D printing: a survey Adv. Sci.7 1902307

[357] [357] Roach D J, Hamel C M, Dunn C K, Johnson M V, Kuang X and Qi H J 2019 The m4 3D printer: a multi-material multi-method additive manufacturing platform for future 3D printed structures Addit. Manuf.29 100819

[358] [358] Peng X R, Kuang X, Roach D J, Wang Y Q, Hamel C M, Lu C L and Qi H J 2021 Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices Addit. Manuf.40 101911

[359] [359] Cadiou T, Demoly F and Gomes S 2021 A hybrid additive manufacturing platform based on fused filament fabrication and direct ink writing techniques for multi-material 3D printing Int. J. Adv. Manuf. Technol.114 3551–62

[360] [360] Jin J, Zhang F Z, Yang Y L, Zhang C Q, Wu H D, Xu Y and Chen Y 2023 Hybrid multimaterial 3D printing using photocuring-while-dispensing Small19 2302405

[361] [361] Peng X R, Wu S, Sun X H, Yue L, Montgomery S M, Demoly F, Zhou K, Zhao R R and Qi H J 2022 4D printing of freestanding liquid crystal elastomers via hybrid additive manufacturing Adv. Mater.34 2204890

[362] [362] Rau D A, Forgiarini M and Williams C B 2021 Hybridizing direct ink write and mask-projection vat photopolymerization to enable additive manufacturing of high viscosity photopolymer resins Addit. Manuf.42 101996

[363] [363] Zhang Y F, Li H G, Long C Y, Xiong Y and Ge Q 2023 Tailorable activation of thermoresponsive composite structures incorporating wavy heaters via hybrid manufacturing Compos. Commun.38 101523

[364] [364] Wu L X, Meng L, Wang Y Y, Lv M, Ouyang T Y, Wang Y L and Zeng X Y 2023 Fabrication of polyetheretherketone (PEEK)-based 3D electronics with fine resolution by a hydrophobic treatment assisted hybrid additive manufacturing method Int. J. Extrem. Manuf.5 035003

[365] [365] Liu B et al 2024 4D printed hydrogel scaffold with swelling-stiffening properties and programmable deformation for minimally invasive implantation Nat. Commun.15 1587

[366] [366] Choi I, Jang S, Jung S, Woo S, Kim J, Bak C, Lee Y and Park S 2023 A dual stimuli-responsive smart soft carrier using multi-material 4D printing Mater. Horiz.10 3668–79

[367] [367] Rivera-Tarazona L K, Shukla T, Singh K A, Gaharwar A K, Campbell Z T and Ware T H 2022 4D printing of engineered living materials Adv. Funct. Mater.32 2106843

[368] [368] Hassan I and Selvaganapathy P R 2022 A microfluidic printhead with integrated hybrid mixing by sequential injection for multimaterial 3D printing Addit. Manuf.50 102559

[369] [369] Skylar-Scott M A, Mueller J, Visser C W and Lewis J A 2019 Voxelated soft matter via multimaterial multinozzle 3D printing Nature575 330–5

[370] [370] Larson N M, Mueller J, Chortos A, Davidson Z S, Clarke D R and Lewis J A 2023 Rotational multimaterial printing of filaments with subvoxel control Nature613 682–8

[371] [371] Yang W J, Tong Q Y, He C X, He T T, Shuai X, Song H, Aiyiti W and Shuai C J 2024 Mechanically propelled ion exchange regulates metal/bioceramic interface characteristics to improve the corrosion resistance of Mg composite for orthopedic applications Ceram. Int.50 23124–34

[372] [372] Shuai C J, Zhao Y, Deng Y W and Gao C D 2024 Heterogeneous grain structure in biodegradable Zn prepared via mechanical alloying and laser powder bed fusion for strength-plasticity synergy Virtual Phys. Prototyp.19 e2317780

[373] [373] Shuai C J, Zhang J, Yang Y W, Qian H Y, Yang M L and Yang L Y M 2024 Epitaxial growth of rare-earth yttrium on nanosheets to form semicoherent interface in zinc implant J. Mater. Res. Technol.29 1206–17

[374] [374] Shuai C J, Li D S, Yao X, Li X and Gao C D 2023 Additive manufacturing of promising heterostructure for biomedical applications Int. J. Extrem. Manuf.5 032012

[375] [375] Gao C D, Wang L Y, Deng Y W, Peng S P and Shuai C J 2025 Multifactorial impacts of B-doping on Fe81Ga19 alloys prepared by laser-beam powder bed fusion: microstructure, magnetostriction, and osteogenesis J. Mater. Sci. Technol.205 14–26

[376] [376] Bandyopadhyay A, Mitra I, Avila J D, Upadhyayula M and Bose S 2023 Porous metal implants: processing, properties, and challenges Int. J. Extrem. Manuf.5 032014

[377] [377] Tan C, Deng C, Li S, Abena A, Jamshidi P, Essa K, Wu L, Xu G, Attallah M M and Liu J 2022 Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure Int. J. Extrem. Manuf.4 045003

[378] [378] Zhao W, Zhang F H, Leng J S and Liu Y J 2019 Personalized 4D printing of bioinspired tracheal scaffold concept based on magnetic stimulated shape memory composites Compos. Sci. Technol.184 107866

[379] [379] Li Y Y, You J Q, Lv H X, Wang C, Zhai S B, Ren S C, Liu X Y, Zhang Y D and Zhou Y M 2024 4D-printed dual-responsive bioscaffolds for treating critical-sized irregular bone defects Chem. Eng. J.489 151205

[380] [380] Mahjoubnia A, Cai D P, Wu Y C, King S D, Torkian P, Chen A C, Talaie R, Chen S Y and Lin J 2024 Digital light 4D printing of bioresorbable shape memory elastomers for personalized biomedical implantation Acta Biomater.177 165–77

[381] [381] Bond G, Mahjoubnia A, Zhao W, King S D, Chen S Y and Lin J 2023 4D printing of biocompatible, hierarchically porous shape memory polymeric structures Biomater. Adv.153 213575

[382] [382] Chen A N, Su J, Li Y J, Zhang H B, Shi Y S, Yan C S and Lu J 2023 3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering Int. J. Extrem. Manuf.5 032007

[383] [383] Zhao W, Yue C B, Liu L W, Liu Y J and Leng J S 2023 Research progress of shape memory polymer and 4D printing in biomedical application Adv. Healthc. Mater.12 2201975

[384] [384] Arif Z U, Khalid M Y, Ahmed W and Arshad H 2022 A review on four-dimensional (4D) bioprinting in pursuit of advanced tissue engineering applications Bioprinting27 e00203

[385] [385] Agarwal T et al 2021 4D printing in biomedical applications: emerging trends and technologies J. Mater. Chem. B 9 7608–32

[386] [386] Solis D M and Czekanski A 2022 3D and 4D additive manufacturing techniques for vascular-like structures—a review Bioprinting25 e00182

[387] [387] Li Y G, Shi Y X, Lu Y C, Li X, Zhou J, Zadpoor A A and Wang L N 2023 Additive manufacturing of vascular stents Acta Biomater.167 16–37

[388] [388] Kirillova A, Maxson R, Stoychev G, Gomillion C T and Ionov L 2017 4D biofabrication using shape-morphing hydrogels Adv. Mater.29 1703443

[389] [389] Cui C X, Kim D O, Pack M Y, Han B, Han L, Sun Y and Han L H 2020 4D printing of self-folding and cell-encapsulating 3D microstructures as scaffolds for tissue-engineering applications Biofabrication12 045018

[390] [390] Kitana W, Apsite I, Hazur J, Boccaccini A R and Ionov L 2023 4D biofabrication of T-shaped vascular bifurcation Adv. Mater. Technol.8 2200429

[391] [391] Jia H, Gu S Y and Chang K 2018 3D printed self-expandable vascular stents from biodegradable shape memory polymer Adv. Polym. Technol.37 3222–8

[392] [392] Lin C, Zhang L J, Liu Y J, Liu L W and Leng J S 2020 4D printing of personalized shape memory polymer vascular stents with negative Poisson's ratio structure: a preliminary study Sci. China Technol. Sci.63 578–88

[393] [393] Zhou Y Y, Zhou D, Cao P R, Zhang X R, Wang Q H, Wang T M, Li Z L, He W Y, Ju J P and Zhang Y M 2021 4D printing of shape memory vascular stent based on CD-g-polycaprolactone Macromol. Rapid Commun.42 2100176

[394] [394] Shin Y C et al 2019 Development of a shape-memory tube to prevent vascular stenosis Adv. Mater.31 1904476

[395] [395] Zhang Y Y et al 2018 Radiopaque highly stiff and tough shape memory hydrogel microcoils for permanent embolization of arteries Adv. Funct. Mater.28 1705962

[396] [396] Wang S et al 2023 Preshaped 4D photocurable ultratough organogel microcoils for personalized endovascular embolization Adv. Mater.35 2308130

[397] [397] Cui H T et al 2020 4D physiologically adaptable cardiac patch: a 4-month in vivo study for the treatment of myocardial infarction Sci. Adv.6 eabb5067

[398] [398] Zhang Y C, Li C R, Zhang W, Deng J J, Nie Y Y, Du X F, Qin L and Lai Y X 2022 3D-printed NIR-responsive shape memory polyurethane/magnesium scaffolds with tight-contact for robust bone regeneration Bioact. Mater.16 218–31

[399] [399] You Y D et al 2021 4D printing of multi-responsive membrane for accelerated in vivo bone healing via remote regulation of stem cell fate Adv. Funct. Mater.31 2103920

[400] [400] Sun M Y et al 2024 4D oriented dynamic scaffold for promoting peripheral nerve regeneration and functional recovery Adv. Funct. Mater.34 2305827

[401] [401] Ghofrani A, Taghavi L, Khalilivavdareh B, Rohani Shirvan A and Nouri A 2022 Additive manufacturing and advanced functionalities of cardiac patches: a review Eur. Polym. J.174 111332

[402] [402] Miao S D et al 2018 Photolithographic-stereolithographic-tandem fabrication of 4D smart scaffolds for improved stem cell cardiomyogenic differentiation Biofabrication10 035007

[403] [403] Hann S Y, Cui H, Esworthy T and Zhang L G 2023 4D thermo-responsive smart hiPSC-CM cardiac construct for myocardial cell therapy Int. J. Nanomed.18 1809–21

[404] [404] Feng J Y, Shi H, Yang X Y and Xiao S 2021 Self-adhesion conductive sub-micron fiber cardiac patch from shape memory polymers to promote electrical signal transduction function ACS Appl. Mater. Interfaces13 19593–602

[405] [405] Cabrera M S, Sanders B, Goor O J G M, Driessen-Mol A, Oomens C W J and Baaijens F P T 2017 Computationally designed 3D printed self-expandable polymer stents with biodegradation capacity for minimally invasive heart valve implantation: a proof-of-concept study 3D Print. Addit. Manuf.4 19–29

[406] [406] Wang C et al 2020 Advanced reconfigurable scaffolds fabricated by 4D printing for treating critical-size bone defects of irregular shapes Biofabrication12 045025

[407] [407] Liu C et al 2023 4D printing of personalized-tunable biomimetic periosteum with anisotropic microstructure for accelerated vascularization and bone healing Adv. Healthc. Mater.12 2202868

[408] [408] Zhao W, Huang Z P, Liu L W, Wang W B, Leng J S and Liu Y J 2021 Porous bone tissue scaffold concept based on shape memory PLA/Fe3O4Compos. Sci. Technol.203 108563

[409] [409] Wang Y J, Jeng U S and Hsu S H 2018 Biodegradable water-based polyurethane shape memory elastomers for bone tissue engineering ACS Biomater. Sci. Eng.4 1397–406

[410] [410] Senatov F S, Zadorozhnyy M Y, Niaza K V, Medvedev V V, Kaloshkin S D, Anisimova N Y, Kiselevskiy M V and Yang K C 2017 Shape memory effect in 3D-printed scaffolds for self-fitting implants Eur. Polym. J.93 222–31

[411] [411] Senatov F S, Niaza K V, Zadorozhnyy M Y, Maksimkin A V, Kaloshkin S D and Estrin Y Z 2016 Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds J. Mech. Behav. Biomed. Mater.57 139–48

[412] [412] Hendrikson W J, Rouwkema J, Clementi F, van Blitterswijk C A, Far S and Moroni L 2017 Towards 4D printed scaffolds for tissue engineering: exploiting 3D shape memory polymers to deliver time-controlled stimulus on cultured cells Biofabrication9 031001

[413] [413] Liu W K et al 2022 Water-triggered stiffening of shape-memory polyurethanes composed of hard backbone dangling PEG soft segments Adv. Mater.34 2201914

[414] [414] Esworthy T J, Miao S D, Lee S J, Zhou X, Cui H T, Zuo Y Y and Zhang L G 2019 Advanced 4D-bioprinting technologies for brain tissue modeling and study Int. J. Smart Nano Mater.10 177–204

[415] [415] Miao S D, Nowicki M, Cui H T, Lee S J, Zhou X, Mills D K and Zhang L G 2019 4D anisotropic skeletal muscle tissue constructs fabricated by staircase effect strategy Biofabrication11 035030

[416] [416] Miao S D, Cui H T, Esworthy T, Mahadik B, Lee S J, Zhou X, Hann S Y, Fisher J P and Zhang L G 2020 4D self-morphing culture substrate for modulating cell differentiation Adv. Sci.7 1902403

[417] [417] Lin C, Huang Z P, Wang Q L, Zou Z C, Wang W B, Liu L W, Liu Y J and Leng J S 2023 Mass-producible near-body temperature-triggered 4D printed shape memory biocomposites and their application in biomimetic intestinal stents Composites B 256 110623

[418] [418] Lee Y B, Jeon O, Lee S J, Ding A X, Wells D and Alsberg E 2021 Induction of four-dimensional spatiotemporal geometric transformations in high cell density tissues via shape-changing hydrogels Adv. Funct. Mater.31 2010104

[419] [419] Kim S H et al 2020 4D-bioprinted silk hydrogels for tissue engineering Biomaterials260 120281

[420] [420] Cui H T, Miao S D, Esworthy T, Lee S J, Zhou X, Hann S Y, Webster T J, Harris B T and Zhang L G 2019 A novel near-infrared light responsive 4D printed nanoarchitecture with dynamically and remotely controllable transformation Nano Res.12 1381–8

[421] [421] Apsite I, Uribe J M, Posada A F, Rosenfeldt S, Salehi S and Ionov L 2020 4D biofabrication of skeletal muscle microtissues Biofabrication12 015016

[422] [422] Luo Y X, Lin X, Chen B R and Wei X Y 2019 Cell-laden four-dimensional bioprinting using near-infrared-triggered shape-morphing alginate/polydopamine bioinks Biofabrication11 045019

[423] [423] Calvo-Correas T, Shirole A, Crippa F, Fink A, Weder C, Corcuera M A and Eceiza A 2019 Biocompatible thermo- and magneto-responsive shape-memory polyurethane bionanocomposites Mater. Sci. Eng. C 97 658–68

[424] [424] Lopez-Larrea N, Wustoni S, Peas M I, Uribe J, Dominguez-alfaro A, Gallastegui A, Inal S and Mecerreyes D 2024 PNIPAM/PEDOT:PSS hydrogels for multifunctional organic electrochemical transistors Adv. Funct. Mater.2024 2403708

[425] [425] Zhu H, Yao C, Wei B Y, Xu C Y, Huang X X, Liu Y, He J K, Zhang J N and Li D C 2023 3D printing of functional bioengineered constructs for neural regeneration: a review Int. J. Extrem. Manuf.5 042004

Tools

Get Citation

Copy Citation Text

Feng Pei, Yang Feng, Jia Jiye, Zhang Jing, Tan Wei, Shuai Cijun. Mechanism and manufacturing of 4D printing: derived and beyond the combination of 3D printing and shape memory material[J]. International Journal of Extreme Manufacturing, 2024, 6(6): 62011

Download Citation

EndNote(RIS)BibTexPlain Text
Save article for my favorites
Paper Information

Category: Topical Review

Received: Apr. 24, 2024

Accepted: Feb. 13, 2025

Published Online: Feb. 13, 2025

The Author Email:

DOI:10.1088/2631-7990/ad7e5f

Topics