[1] LIU G, LIU Y F, ZHENG S Q. Moving-gimbal effect suppression for AMB-rotor systems with improved dynamic response in control moment gyroscopes[J]. ISA Transactions, 125, 539-546(2022).

[2] [2] 2韩邦成， 彭松， 贺赞， 等. 磁悬浮控制力矩陀螺高速电机绕组涡流损耗计算及热分析［J］. 光学 精密工程， 2020， 28（1）： 130-140. doi: 10.3788/ope.20202801.0130HANB C， PENGS， HEZ， et al. Eddy Current loss calculation and thermal analysis of high-speed motor winding in magnetically suspended control moment gyroscope［J］. Opt. Precision Eng.， 2020， 28（1）： 130-140.（in Chinese）. doi: 10.3788/ope.20202801.0130

[3] LEI Y J, YUAN L, ZHU Q et al. A steering method with multiobjective optimizing for nonredundant single-gimbal control moment gyro systems[J]. IEEE Transactions on Industrial Electronics, 69, 4177-4184(2022).

[4] [4] 4李海涛， 宋鹏， 侯林. 双框架控制力矩陀螺框架系统的扰动观测及抑制［J］. 光学 精密工程， 2020， 28（2）： 340-349.LIH T， SONGP， HOUL. Disturbance observation and rejection for gimbal system of double gimbal control moment gyroscope［J］. Opt. Precision Eng.， 2020， 28（2）： 340-349.（in Chinese）

[5] HU R K, ZHOU G W, LI J Y. A nonlinear torsional vibration model of harmonic gear reducer and the effect of various factors on torsional vibration during start and stop[J]. Journal of Vibration and Control, 28, 1536-1549(2022).

[6] JUNG B J, KIM B, KOO J C et al. Joint torque sensor embedded in harmonic drive using order tracking method for robotic application[J]. IEEE/ASME Transactions on Mechatronics, 22, 1594-1599(2017).

[7] MIYAZAKI T, OHISHI K. Robust speed control system considering vibration suppression caused by angular transmission error of planetary gear[J]. IEEE/ASME Transactions on Mechatronics, 7, 235-244(2002).

[8] [8] 8李海涛， 房建成， 韩邦成， 等. 一种双框架磁悬浮控制力矩陀螺框架伺服系统扰动抑制方法研究［J］. 宇航学报， 2009， 30（6）： 2199-2205. doi: 10.3873/j.issn.1000-1328.2009.06.025LIH T， FANGJ C， HANB C， et al. Study on the system disturbance rejection method used in the gimbal servo system of double gimbal magnetically suspended control moment gyro［J］. Journal of Astronautics， 2009， 30（6）： 2199-2205.（in Chinese）. doi: 10.3873/j.issn.1000-1328.2009.06.025

[9] GODLER I, OHNISHI K, YAMASHITA T. Repetitive control to reduce speed ripple caused by strain wave gearing[C], 1034-1038(1994).

[10] [10] 10房建成， 陈萌， 李海涛. 磁悬浮控制力矩陀螺框架系统谐波减速器的迟滞建模［J］. 光学 精密工程， 2014， 22（11）： 2950-2958. doi: 10.3788/ope.20142211.2950FANGJ C， CHENM， LIH T. Hysteresis modeling for harmonic drive in DGMSCMG gimbal system［J］. Opt. Precision Eng.， 2014， 22（11）： 2950-2958.（in Chinese）. doi: 10.3788/ope.20142211.2950

[11] [11] 11党选举， 贺思颖. 采用非对称迟滞算子的工业机器人柔性关节迟滞特性建模［J］. 光学 精密工程， 2021， 29（10）： 2412-2420. doi: 10.37188/OPE.20212910.2412DANGX J， HES Y. Hysteresis modeling for flexible joint of industrial robot using asymmetric hysteresis operator［J］. Opt. Precision Eng.， 2021， 29（10）： 2412-2420.（in Chinese）. doi: 10.37188/OPE.20212910.2412

[12] [12] 12韩邦成， 马纪军， 李海涛. 谐波减速器的非线性摩擦建模及补偿［J］. 光学 精密工程， 2011， 19（5）： 1095-1103. doi: 10.3788/ope.20111905.1104HANB C， MAJ J， LIH T. Modeling and compensation of nonlinear friction in harmonic driver［J］. Opt. Precision Eng.， 2011， 19（5）： 1095-1103.（in Chinese）. doi: 10.3788/ope.20111905.1104

[13] SHI Y Y, YU Y J, LI H T et al. Speed fluctuation suppression by model-based feed-forward control in gimbal system with harmonic drive[J]. IEEE Transactions on Power Electronics, 37, 6678-6687(2022).

[14] LU Y S, LIN S M. Disturbance-observer-based adaptive feedforward cancellation of torque ripples in harmonic drive systems[J]. Electrical Engineering, 90, 95-106(2007).

[15] [15] 15王冲冲，杨桂林，陈庆盈，等.基于自适应干扰估测器的协作机器人关节速度波动抑制方法［J/OL］. 机器人： 1-10 ［2022-04-29］. DOI： 10.13973/j.cnki.robot.210412.WANGC C，YANGG L， CHENQ Y， et al. Joint velocity fluctuation suppression method of collaborative robot based on adaptive disturbance estimator［J/OL］. Robot：1-10［2022-04-29］. DOI： 10.13973/j.cnki.robot.210412.（in Chinese）

[16] [16] 16侯林. 基于谐波减速器的SGCMG框架系统扰动抑制方法研究［D］. 北京： 北京航空航天大学， 2018.HOUL. Research on Disturbances Rejection Method of Gimbal System for Single Gimbal Control Moment Gyroscope with Harmonic Driver ［D］. Beijing： Beihang University，2018. （in Chinese）

[17] BLANKEN L, OOMEN T. Multivariable iterative learning control design procedures： from decentralized to centralized， illustrated on an industrial printer[J]. IEEE Transactions on Control Systems Technology, 28, 1534-1541(2020).

[18] SONG F Z, LIU Y, JIN W et al. Data-driven feedforward learning with force ripple compensation for wafer stages： a variable-gain robust approach[J]. IEEE Transactions on Neural Networks and Learning Systems, 33, 1594-1608(2022).

[19] FU X W, YANG X F, ZANCHETTA P et al. Frequency-domain data-driven adaptive iterative learning control approach： with application to wafer stage[J]. IEEE Transactions on Industrial Electronics, 68, 9309-9318(2021).

[20] ARIMOTO S, KAWAMURA S, MIYAZAKI F. Bettering operation of Robots by learning[J]. Journal of Robotic Systems, 1, 123-140(1984).

[21] [21] 21张旭， 赖磊捷， 李朋志， 等. 电磁驱动柔顺微定位平台闭环频域逆迭代学习控制［J］. 光学 精密工程， 2021， 29（9）： 2149-2157. doi: 10.37188/OPE.20212909.2149ZHANGX， LAIL J， LIP Z， et al. Closed-loop inverse iterative learning control in frequency-domain for electromagnetic driven compliant micro-positioning platform［J］. Opt. Precision Eng.， 2021， 29（9）： 2149-2157.（in Chinese）. doi: 10.37188/OPE.20212909.2149

[22] BOLDER J, VAN ZUNDERT J, KOEKEBAKKER S et al. Enhancing flatbed printer accuracy and throughput： optimal rational feedforward controller tuning via iterative learning control[J]. IEEE Transactions on Industrial Electronics, 64, 4207-4216(2016).

[23] DAI L Y, LI X, ZHU Y et al. Feedforward tuning by fitting iterative learning control signal for precision motion systems[J]. IEEE Transactions on Industrial Electronics, 68, 8412-8421(2021).

[24] [24] 24史阳阳. 磁悬浮CMG高精度框架角速率伺服控制方法与实验研究［D］. 北京： 北京航空航天大学， 2021.SHIY Y. High-precision Gimbal Angular Speed Servo Control Method and Experimental Research for Magnetically Suspended Control Moment Gyroscope ［D］. Beijing： Beihang University， 2021. （in Chinese）

[25] NAKANO M, SHE J H, MASTUO Y et al. Elimination of position-dependent disturbances in constant-speed-rotation control systems[J]. Control Engineering Practice, 4, 1241-1248(1996).