[1] Hu H F, Guo P, Qiao G B. Review on some key mechanical problems for large mirrors in space optics[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 51, 42-47(2023).

[2] Bayar M. Lens barrel optomechanical design principles[J]. Optical Engineering, 20, 181-186(1981).

[3] Vukobratovich D, Fetterhoff K A, Myers J R et al. Bonded mounts for small cryogenic optics[J]. Proceedings of SPIE, 4131, 228-239(2000).

[4] Klotz G L. Tool for bonded optical element thermal stability analysis[J]. Proceedings of SPIE, 8125, 81250I(2011).

[5] Guan S H. Analysis of impact of RTV bond on the surface shape in the assembly of high-precision optical lens[D](2013).

[6] Dong D Y, Li Z L, Li R G et al. Simulation and experiment of influence of adhesive curing on reflective mirror surface[J]. Optics and Precision Engineering, 22, 2698-2707(2014).

[7] Zhou D P. Viscoelasticity and internal stress relaxation of the adhesive line[J]. Adhesion, 1997, 19-54.

[8] Feng R. Research on the influence of adhesion difference on the surface shape of opto-mechnical lenses[D](2022).

[9] Maggiore S, Banea M D, Stagnaro P et al. A review of structural adhesive joints in hybrid joining processes[J]. Polymers, 13, 3961(2021).

[10] Sun L J, Wu W C, Chen W C et al. Microstress bonding design of low-distortion mirror assembly[J]. Optical Engineering, 61, 105109(2022).

[11] Liu G Q, Ma C, Zhang Z C et al. Flexible support structure of lens for spaceborne thermal infrared long wave spectrometer[J]. Chinese Journal of Lasers, 51, 1710003(2024).

[12] Zhai F C, Zeng Q H, Mao F L et al. Mirror compensation technology for photoelectric stabilized platform based on virtual image motion analysis[J]. Acta Optica Sinica, 44, 2012004(2024).

[13] Company M. Safety data sheet[EB/OL]. https:∥www.3m.com/3M/en/_US/p/d/b40066427/

[14] de Vreugd J, Jansen K M B, Ernst L J et al. Modelling of viscoelastic properties of a curing adhesive[C], 241-251(2007).

[15] Zhang X B, Yin S H, Zhu K J et al. Simulation of compression molding aspherical glass lenses based on generalized Maxwell model[J]. Materials Review, 27, 148-152(2013).

[16] Chen Y, Zhang K H. The application of Boltzmann overlapping principle in viscoelastic theory of polymer[J]. Journal of Northwest Normal University (Natural Science Edition), 41, 90-92(2005).

[17] Liu J. Mechanical behavior analysis of adhesive structure of optomechanical system[D](2011).

[18] Guan Y J. Optimum design of adhesive bonds in the space mirror[J]. Journal of Machine Design, 28, 72-76(2011).

[19] Wu Y J, Liu Y, Sun X. Analysis and elimination of adhesive bonding force of flexible supported space mirror[J]. Infrared and Laser Engineering, 51, 20210496(2022).

[20] Yoder P, Vukobratovich D[M]. Opto-mechanical systems design, two volume set(2018).

[21] Hu H F, Zhou D, Zhao C C et al. Hetero-bonding strength investigation into opto-mechanical interface[J]. Frontiers in Astronomy and Space Sciences, 11, 1406090(2024).

[22] Zhang J Q, Guo Y B, Zhang Y J et al. Design of reflector assembly and adhesive layer under airborne wide temperature conditions[J]. Chinese Optics, 16, 578-586(2023).

[23] Lu Y T, Wang W Z. Alignment of large aperture gluing primary mirror with finite element method[J]. Spacecraft Recovery & Remote Sensing, 38, 38-44(2017).

[24] Hu H F. Research on design and test of the multi-point hybrid support structures for in-situ optical fabrication and test of large optics[D](2020).