[1] S P FANG, P C YANG, X D ZHU. Form deviation measurement of helical gear tooth flank using phase-shifting laser interferometry. Lasers in Engineering, 29, 9-22(2014).

[2] T LI, X TAN. Stepwise interferometric method of measuring the refractive index of liquid samples. Applied Optics, 1993 32, 2274-2277.

[3] F ZHANG, X PENG. Analysis on load-bearing contact characteristics of face gear tooth surface wear with installation errors. Computers and Concrete, 31, 163-171(2023).

[4] C LIANG, C SONG, C ZHU et al. Modelling method,simulation and experimental verification of hypoid gear involved tooth surface deviation under manufacturing process. Mechanism and Machine Theory, 182, 105248-105254(2023).

[5] Pengcheng YANG, Yang LIU, Xindong ZHU et al. Recognition method of scattering noise in interferometric streak images based on object image. Applied Optics, 38, 221-226(2017).

[6] N K ANUSHKANNA, H MANGALAM, C R RATHISH. Design simulation and optimization of optical full-adder based on Mach Zehnder interference. Optics Communications, 528, 129056-129062(2023).

[7] X D ZHU, Z CHEN, P C YANG et al. Design optical surface as the measurement datum in measuring gear tooth flank by symmetrical laser interferometer. Optics & Laser Technology, 169, 110034-110045(2024).

[8] P C YANG, L P LIAN, Z J YU et al. Optical path modulation of interference fringe density based on position errors analysis in oblique laser interferometry. Optical Engineering, 61, 124112-124120(2022).

[9] Yibing HU, Chen TANG, Shan TAO. Optical interference fringe image enhancement based on multi-scale Retinex algorithm. Advances in Lasers and Optoelectronics, 56, 241006(2019).

[10] P C YANG, S P FANG, L MENG et al. Shield analysis and non-rigid match in positioning the actual interferogram on the tooth flank based on oblique incidence interferometry. Optik, 124, 4307-4312(2013).

[11] S P FANG, X D ZHU, P C YANG et al. Analysis and compensation method for installation error in measuring gear tooth flank with laser interferometry. Optical Engineering, 53, 084111(2014).

[12] X D ZHU, Z H WANG, P C YANG et al. Analysis and optimization of shielding in measuring helical gear tooth flank by laser interferometry. Measurement Science and Technology, 33, 105006-105012(2022).

[13] S P FANG, L J WANG, P C YANG et al. Improvement of the oblique-incidence optical interferometric system to measure tooth flanks of involute helical gears. Optics,Image Science and Vision, 28, 590-595(2011).

[14] Z J YU, P C YANG, X D ZHU et al. Valid measurement region segmentation method for the interferogram based on local fringe distribution features. Optics Communications, 540, 129503(2023).

[15] S P FANG, L J WANG, M KOMORI et al. Design of laser interferometric system for measurement of gear tooth flank. Optik, 122, 1301-1304(2011).

[16] P C YANG, S P FANG, L MENG et al. Shield analysis and non-rigid match in positioning the actual interferogram on the tooth flank based on oblique incidence interferometry. Optik, 124, 4307-4312(2013).

[17] Lukai LIN, Qianqian NIU, Yi LI. Optimized camera parameter calibration method based on checkerboard calibration board. Computer Technology and Development, 33, 101-105(2023).

[18] Zhao YANG, Pencheng YANG, Mengmeng ZHANG et al. A study of correction methods for local geometric aberrations in projected phantom imaging. Photonics Letters, 51, 0311004(2022).

[19] S P FANG, X D ZHU, P C YANG et al. Affect of interference fringe width for processing accuracy and its recognition in measuring form deviation of tooth flank with laser interferometry. Optics Communications, 328, 49-56(2014).