[1] [1] Miao X X, Yuan X D, Lü H B, et al. Experimental study of laser-induced damage of optical components surface owing to particle contamination in high power laser facility［J］. Chinese Journal of Lasers, 2015, 42(6): 0602001.

[2] [2] Walker T, Guenther A, Nielsen P. Pulsed laser-induced damage to thin-film optical coatings: Part II: Theory［J］. IEEE Journal of Quantum Electronics, 1981, 17(10): 2053-2065.

[3] [3] Walker T, Guenther A, Nielsen P. Pulsed laser-induced damage to thin-film optical coatings: Part I: Experiment［J］. IEEE Journal of Quantum Electronics, 1981, 17(10): 2041-2052.

[4] [4] Génin F Y, Feit M D, Kozlowski M R, et al. Rear-surface laser damage on 355-nm silica optics owing to Fresnel diffraction on front-surface contamination particles［J］. Applied Optics, 2000, 39(21): 3654-3663.

[5] [5] Zhang L X, Zhu X B, Li F Y, et al. Laser-induced thermal damage influenced by surface defects of materials［J］. Acta Optica Sinica, 2016, 36(9): 0914001.

[6] [6] Zeng Y. Laser thermal damage research of thin films based on finite element method［D］. Xi′an: Xi′an Technological University, 2013.

[7] [7] Yang F F. Study on laser damage of optical thin film induced by inclusion absorption based on ANSYS［D］. Wuhan: Wuhan University of Technology, 2008.

[8] [8] Hao M M, Lu G G, Wang L N, et al. Study on laser damage of optical thin films on zinc-germanium diphosphide crystal induced by inclusion［J］. Chinese Journal of Lasers, 2015, 42(6): 0607001.

[9] [9] Spyak P R, Wolfe W L. Scatter from particulate-contaminated mirrors.Part 4: Properties of scatter from dust for visible to far-infrared wavelengths［J］. Optical Engineering, 1992, 31(8): 1775-1785.

[10] [10] Tribble A C, Boyadjian B, Davis J, et al. Contamination control engineering design guidelines for the aerospace community［J］. Proceedings of SPIE, 1996, 2864: 4-15.

[11] [11] Chen L X, Hu X C, Zhang B, et al. Fatigue damage characteristics of deformable mirrors for wavefront correction［J］. Chinese Journal of Lasers, 2016, 43(11): 1105002.

[12] [12] Xu J, Chen L X, You X H, et al. Thermal stress damage of thin-film components induced by surface impurities［J］. Acta Optica Sinica, 2017, 37(6): 0614003.

[13] [13] Liu G T. Atmospheric dust fall and source analysis in Hohhot［D］. Hohhot: Inner Mongolia Normal University, 2008.

[14] [14] Sheng X J. The simulation and experimental analysis of laser-controlled thermal stress cutting of alumina ceramic［D］. Shanghai: Shanghai Jiao Tong University, 2010.

[15] [15] Wang H X, Shen L, Li C F, et al. Analysis and experimental investigation of laser induced damage of optics［J］. Chinese Journal of Lasers, 2017, 44(3): 0302006.

[16] [16] Tolochko N K, Khlopkov Y V, Mozzharov S E, et al. Absorptance of powder materials suitable for laser sintering［J］. Rapid Prototyping Journal, 2000, 6(3): 155-161.

[17] [17] Henley S J, Carey J D, Silva S R P. Pulsed-laser-induced nanoscale island formation in thin metal-on-oxide films［J］. Physical Review B, 2005, 72(19): 195408.

[18] [18] Weber M J. Handbook ofoptical materials［M］. Boca Raton: CRC press, 2002.

[19] [19] Huang W. Study on thin films technology for mid-far-infrared laser coatings［D］. Chengdu: Sichuan University, 2005.

[20] [20] Chopra K L, Kaur I. Thin film phenomena［M］. New York: McGraw-Hill, 1969.

[21] [21] Zhang C J, Fu B, Zhang D Y, et al. Damage mechanisms of multiplayer films filters under continuous laser irradiation［J］. Applied Laser, 2009, 29(5): 431-434.

[22] [22] Miao X X, Yuan X D, Cheng X F, et al. Thermal stress simulation of laser induced damage of fused silica by contamination on the surface［J］. Laser Technology, 2011, 35(2): 285-288.

[23] [23] Chen L Z. The simulation and experimental research on laser induced damage of optical materials［D］. Hangzhou: Zhejiang University, 2014.

[24] [24] Xia J J, Gong H, Cheng L, et al. CW laser induced thermal and mechanical damage in optical window materials［J］. Acta Optica Sinica, 1997, 17(1): 20-23.

[25] [25] Wang H D, Zhang T H. Research progresses on characterization and detection technology of subsurface damages in optical materials［J］. Laser & Optoelectronics Progress, 2017, 54(10): 100003.

[26] [26] Su J H, Lü N, Ge J M. Characteristics of plasma shock waves in laser-induced film damage［J］. Chinese Journal of Lasers, 2016, 43(12): 1203003.

[27] [27] Hunt J S. National ignition facility performance review 1999［R］. Lawrence Livermore National Laboratory, 2000: 15013275.