Manipulating Crystal Growth and Secondary Phase PbI2 to Enable Efficient and Stable Perovskite Solar Cells with Natural Additives

Yirong Wang; Yaohui Cheng; Chunchun Yin; Jinming Zhang; Jingxuan You; Jizheng Wang; Jinfeng Wang; Jun Zhang

doi:10.1007/s40820-024-01400-w

Nano-Micro Letters, Volume. 16, Issue 1, 183(2024)

Manipulating Crystal Growth and Secondary Phase PbI2 to Enable Efficient and Stable Perovskite Solar Cells with Natural Additives

Yirong Wang1...2, Yaohui Cheng3, Chunchun Yin1, Jinming Zhang1,*, Jingxuan You1,2, Jizheng Wang1,2,**, Jinfeng Wang4, and Jun Zhang12 |Show fewer author(s)

Author Affiliations

¹Institute of Chemistry, Chinese Academy of Sciences (CAS), Beijing 100190, People’s Republic of China

²University of Chinese Academy of Sciences, Beijing, 100049, People’s Republic of China

³Nanjing University, Nanjing, 210023, People’s Republic of China

⁴Wuhan Textile University, Wuhan, 430200, People’s Republic of China

show less

References(79)

[1] [1] A. Polman, M. Knight, E.C. Garnett, B. Ehrler, W.C. Sinke, Photovoltaic materials: present efficiencies and future challenges. Science 352, eaad4424 (2016). 10.1126/science.aad4424

[2] [2] G. Tang, F. Yan, Recent progress of flexible perovskite solar cells. Nano Today 39, 101155 (2021). 10.1016/j.nantod.2021.101155

[3] [3] R.J. Sutton, G.E. Eperon, L. Miranda, E.S. Parrott, B.A. Kamino et al., Bandgap-tunable cesium lead halide perovskites with high thermal stability for efficient solar cells. Adv. Energy Mater. 6, 1502458 (2016). 10.1002/aenm.201502458

[4] [4] A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009). 10.1021/ja809598r

[5] [5] Y. Zhao, F. Ma, Z. Qu, S. Yu, T. Shen et al., Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells. Science 377, 531–534 (2022). 10.1126/science.abp8873

[6] [6] J. Burschka, N. Pellet, S.-J. Moon, R. Humphry-Baker, P. Gao et al., Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013). 10.1038/nature12340

[7] [7] N.J. Jeon, J.H. Noh, W.S. Yang, Y.C. Kim, S. Ryu et al., Compositional engineering of perovskite materials for high-performance solar cells. Nature 517, 476–480 (2015). 10.1038/nature14133

[8] [8] National Renewable Energy Laboratory, "Best research-cell efficiency chart" (NREL, 2023); https://www.nrel.gov/pv/interactive-cell-efficiency.html

[9] [9] K. Wang, L. Zheng, Y. Hou, A. Nozariasbmarz, B. Poudel et al., Overcoming Shockley-Queisser limit using halide perovskite platform? Joule 6, 756–771 (2022). 10.1016/j.joule.2022.01.009

[10] [10] S. Zhang, F. Ye, X. Wang, R. Chen, H. Zhang et al., Minimizing buried interfacial defects for efficient inverted perovskite solar cells. Science 380, 404–409 (2023). 10.1126/science.adg3755

[11] [11] X. Gu, W. Xiang, Q. Tian, S.F. Liu, Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells. Angew. Chem. Int. Ed. 60, 23164–23170 (2021). 10.1002/anie.202109724

[12] [12] H. Yu, H. Lu, F. Xie, S. Zhou, N. Zhao, Native defect-induced hysteresis behavior in organolead iodide perovskite solar cells. Adv. Funct. Mater. 26, 1411–1419 (2016). 10.1002/adfm.201504997

[13] [13] S. Zhang, J. He, X. Guo, J. Su, Z. Lin et al., Crystallization dynamic control of perovskite films with suppressed phase transition and reduced defects for highly efficient and stable all-inorganic perovskite solar cells. ACS Mater. Lett. 5, 1497–1505 (2023). 10.1021/acsmaterialslett.3c00275

[14] [14] S. Xiong, Z. Hou, S. Zou, X. Lu, J. Yang et al., Direct observation on p- to n-type transformation of perovskite surface region during defect passivation driving high photovoltaic efficiency. Joule 5, 467–480 (2021). 10.1016/j.joule.2020.12.009

[15] [15] H. Zhu, S. Teale, M.N. Lintangpradipto, S. Mahesh, B. Chen et al., Long-term operating stability in perovskite photovoltaics. Nat. Rev. Mater. 8, 569–586 (2023). 10.1038/s41578-023-00582-w

[16] [16] Y. Gao, F. Ren, D. Sun, S. Li, G. Zheng et al., Elimination of unstable residual lead iodide near the buried interface for the stability improvement of perovskite solar cells. Energy Environ. Sci. 16, 2295–2303 (2023). 10.1039/D3EE00293D

[17] [17] F. Lang, O. Shargaieva, V.V. Brus, H.C. Neitzert, J. Rappich et al., Influence of radiation on the properties and the stability of hybrid perovskites. Adv. Mater. 30, 1702905 (2018). 10.1002/adma.201702905

[18] [18] L. Zuo, H. Guo, D.W. DeQuilettes, S. Jariwala, N. De Marco et al., Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells. Sci. Adv. 3, e1700106 (2017). 10.1126/sciadv.1700106

[19] [19] M. Wu, Y. Duan, L. Yang, P. You, Z. Li et al., Multifunctional small molecule as buried interface passivator for efficient planar perovskite solar cells. Adv. Funct. Mater. 33, 2300128 (2023). 10.1002/adfm.202300128

[20] [20] Q. Jiang, Y. Zhao, X. Zhang, X. Yang, Y. Chen et al., Surface passivation of perovskite film for efficient solar cells. Nat. Photon. 13, 460–466 (2019). 10.1038/s41566-019-0398-2

[21] [21] X. Zhu, S. Yang, Y. Cao, L. Duan, M. Du et al., Ionic-liquid-perovskite capping layer for stable 24.33%-efficient solar cell. Adv. Energy Mater. 12, 2103491 (2022). 10.1002/aenm.202103491

[22] [22] Y. Shen, G. Xu, J. Li, X. Lin, F. Yang et al., Functional ionic liquid polymer stabilizer for high-performance perovskite photovoltaics. Angew. Chem. Int. Ed. 62, e202300690 (2023). 10.1002/anie.202300690

[23] [23] Y. Du, Q. Tian, X. Chang, J. Fang, X. Gu et al., Ionic liquid treatment for highest-efficiency ambient printed stable all-inorganic CsPbI3 perovskite solar cells. Adv. Mater. 34, e2106750 (2022). 10.1002/adma.202106750

[24] [24] Y. Wang, Y. Yang, N. Li, M. Hu, S.R. Raga et al., Ionic liquid stabilized perovskite solar modules with power conversion efficiency exceeding 20%. Adv. Funct. Mater. 32, 2204396 (2022). 10.1002/adfm.202204396

[25] [25] J.H. Lee, B. Nketia-Yawson, J.J. Lee, J.W. Jo, Ionic liquid-mediated reconstruction of perovskite surface for highly efficient photovoltaics. Chem. Eng. J. 446, 137351 (2022). 10.1016/j.cej.2022.137351

[26] [26] J. Peng, D. Walter, Y. Ren, M. Tebyetekerwa, Y. Wu et al., Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells. Science 371, 390–395 (2021). 10.1126/science.abb8687

[27] [27] Y. Xu, X. Guo, Z. Lin, Q. Wang, J. Su et al., Perovskite films regulation via hydrogen-bonded polymer network for efficient and stable perovskite solar cells. Angew. Chem. Int. Ed. 62, e202306229 (2023). 10.1002/anie.202306229

[28] [28] K. Kim, J. Han, S. Lee, S. Kim, J.-M. Choi et al., Liquid-state dithiocarbonate-based polymeric additives with monodispersity rendering perovskite solar cells with exceptionally high certified photocurrent and fill factor. Adv. Energy Mater. 13, 2203742 (2023). 10.1002/aenm.202203742

[29] [29] T.H. Han, J.W. Lee, C. Choi, S. Tan, C. Lee et al., Perovskite-polymer composite cross-linker approach for highly-stable and efficient perovskite solar cells. Nat. Commun. 10, 520 (2019). 10.1038/s41467-019-08455-z

[30] [30] Y. Zhao, J. Wei, H. Li, Y. Yan, W. Zhou et al., A polymer scaffold for self-healing perovskite solar cells. Nat. Commun. 7, 10228 (2016). 10.1038/ncomms10228

[31] [31] X. Wang, C. Yao, F. Wang, Z. Li, Cellulose-based nanomaterials for energy applications. Small 13, 201702240 (2017). 10.1002/smll.201702240

[32] [32] D. Klemm, B. Heublein, H.-P. Fink, A. Bohn, Cellulose: fascinating biopolymer and sustainable raw material. Angew. Chem. Int. Ed. 44, 3358–3393 (2005). 10.1002/anie.200460587

[33] [33] C. Chen, Y. Kuang, S. Zhu, I. Burgert, T. Keplinger et al., Structure–property–function relationships of natural and engineered wood. Nat. Rev. Mater. 5, 642–666 (2020). 10.1038/s41578-020-0195-z

[34] [34] J. You, X. Zhang, Q. Nan, K. Jin, J. Zhang et al., Aggregation-regulated room-temperature phosphorescence materials with multi-mode emission, adjustable excitation-dependence and visible-light excitation. Nat. Commun. 14, 4163 (2023). 10.1038/s41467-023-39767-w

[35] [35] Y. Xie, H. Lu, J. Huang, H. Xie, Natural materials for sustainable organic solar cells: status and challenge. Adv. Funct. Mater. 33, 2213910 (2023). 10.1002/adfm.202213910

[36] [36] R. Jia, W. Tian, H. Bai, J. Zhang, S. Wang et al., Amine-responsive cellulose-based ratiometric fluorescent materials for real-time and visual detection of shrimp and crab freshness. Nat. Commun. 10, 795 (2019). 10.1038/s41467-019-08675-3

[37] [37] J. Yang, S. Xiong, T. Qu, Y. Zhang, X. He et al., Extremely low-cost and green cellulose passivating perovskites for stable and high-performance solar cells. ACS Appl. Mater. Interfaces 11, 13491–13498 (2019). 10.1021/acsami.9b01740

[38] [38] F. Bisconti, A. Giuri, L. Dominici, S. Carallo, E. Quadrivi et al., Managing transparency through polymer/perovskite blending: a route toward thermostable and highly efficient, semi-transparent solar cells. Nano Energy 89, 106406 (2021). 10.1016/j.nanoen.2021.106406

[39] [39] X. Zhu, R. Lin, H. Gu, H. Hu, Z. Liu et al., Ecofriendly hydroxyalkyl cellulose additives for efficient and stable MAPbI3-Based inverted perovskite solar cells. Energy Environ. Mater. 6, e12426 (2023). 10.1002/eem2.12426

[40] [40] J. Liu, Q. He, J. Bi, M. Lei, W. Zhang et al., Remarkable quality improvement of CsPbIBr2 perovskite film by cellulose acetate addition for efficient and stable carbon-based inorganic perovskite solar cells. Chem. Eng. J. 424, 130324 (2021). 10.1016/j.cej.2021.130324

[41] [41] Y.-R. Wang, C.-C. Yin, J.-M. Zhang, J. Wu, J. Yu et al., Functional cellulose materials fabricated by using ionic liquids as the solvent. Chin. J. Polym. Sci. 41, 483–499 (2023). 10.1007/s10118-022-2787-0

[42] [42] K.N. Onwukamike, S. Grelier, E. Grau, H. Cramail, M.A.R. Meier, Critical review on sustainable homogeneous cellulose modification: why renewability is not enough. ACS Sustain. Chem. Eng. 7, 1826–1840 (2019). 10.1021/acssuschemeng.8b04990

[43] [43] Y. Cheng, Y. Wang, X. Zhang, J. Zhang, Z. He et al., Spontaneous, scalable, and self-similar superhydrophobic coatings for all-weather deicing. Nano Res. 16, 7171–7179 (2023). 10.1007/s12274-022-5320-4

[44] [44] V. Gaydarov, Z. Chen, G. Zamfirova, M.A. Söylemez, J. Zhang et al., Micromechanical and positron annihilation lifetime study of new cellulose esters with different topological structures. Carbohydr. Polym. 219, 56–62 (2019). 10.1016/j.carbpol.2019.05.022

[45] [45] R. Chen, Y. Wang, S. Nie, H. Shen, Y. Hui et al., Sulfonate-assisted surface iodide management for high-performance perovskite solar cells and modules. J. Am. Chem. Soc. 143, 10624–10632 (2021). 10.1021/jacs.1c03419

[46] [46] T. Duong, H. Pham, T.C. Kho, P. Phang, K.C. Fong et al., High efficiency perovskite-silicon tandem solar cells: effect of surface coating versus bulk incorporation of 2D perovskite. Adv. Energy Mater. 10, 1903553 (2020). 10.1002/aenm.201903553

[47] [47] Y. Liu, S. Akin, L. Pan, R. Uchida, N. Arora et al., Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22. Sci. Adv. 5, eaaw2543 (2019). 10.1126/sciadv.aaw2543

[48] [48] H. Wang, F. Ye, J. Liang, Y. Liu, X. Hu et al., Pre-annealing treatment for high-efficiency perovskite solar cells via sequential deposition. Joule 6, 2869–2884 (2022). 10.1016/j.joule.2022.10.001

[49] [49] H. Wang, Z. Wang, Z. Yang, Y. Xu, Y. Ding et al., Ligand-modulated excess PbI2 nanosheets for highly efficient and stable perovskite solar cells. Adv. Mater. 32, e2000865 (2020). 10.1002/adma.202000865

[50] [50] X. Yang, D. Luo, Y. Xiang, L. Zhao, M. Anaya et al., Buried interfaces in halide perovskite photovoltaics. Adv. Mater. 33, 2006435 (2021). 10.1002/adma.202006435

[51] [51] Q. Han, S.H. Bae, P. Sun, Y.T. Hsieh, Y.M. Yang et al., Single crystal formamidinium lead iodide (FAPbI3): insight into the structural, optical, and electrical properties. Adv. Mater. 28, 2253–2258 (2016). 10.1002/adma.201505002

[52] [52] B. Shi, X. Yao, F. Hou, S. Guo, Y. Li et al., Unraveling the passivation process of PbI2 to enhance the efficiency of planar perovskite solar cells. J. Phys. Chem. C 122, 21269–21276 (2018). 10.1021/acs.jpcc.8b08075

[53] [53] M. Qin, P.F. Chan, X. Lu, A systematic review of metal halide perovskite crystallization and film formation mechanism unveiled by in situ GIWAXS. Adv. Mater. 33, e2105290 (2021). 10.1002/adma.202105290

[54] [54] G. Yang, Z. Ren, K. Liu, M. Qin, W. Deng et al., Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation. Nat. Photon. 15, 681–689 (2021). 10.1038/s41566-021-00829-4

[55] [55] W. Shao, H. Wang, F. Ye, C. Wang, C. Wang et al., Modulation of nucleation and crystallization in PbI2 films promoting preferential perovskite orientation growth for efficient solar cells. Energy Environ. Sci. 16, 252–264 (2023). 10.1039/D2EE03342A

[56] [56] H. Cui, L. Huang, S. Zhou, C. Wang, X. Hu et al., Lead halide coordination competition at buried interfaces for low VOC-deficits in wide-bandgap perovskite solar cells. Energy Environ. Sci. 16, 5992–6002 (2023). 10.1039/D3EE02818F

[57] [57] N. Preda, L. Mihut, M. Baibarac, I. Baltog, R. Ramer et al., Films and crystalline powder of PbI2 intercalated with ammonia and pyridine. J. Mater. Sci. Mater. Electron. 20, 465–470 (2009). 10.1007/s10854-008-9681-6

[58] [58] L. Liu, J. Tang, S. Li, Z. Yu, J. Du et al., Multi-site intermolecular interaction for in situ formation of vertically orientated 2D passivation layer in highly efficient perovskite solar cells. Adv. Funct. Mater. 33, 2303038 (2023). 10.1002/adfm.202303038

[59] [59] Y. Ge, H. Wang, C. Wang, C. Wang, H. Guan et al., Intermediate phase engineering with 2, 2-azodi(2-methylbutyronitrile) for efficient and stable perovskite solar cells. Adv. Mater. 35, e2210186 (2023). 10.1002/adma.202210186

[60] [60] J. Chang, E. Feng, H. Li, Y. Ding, C. Long et al., Crystallization and orientation modulation enable highly efficient doctor-bladed perovskite solar cells. Nano-Micro Lett. 15, 164 (2023). 10.1007/s40820-023-01138-x

[61] [61] K. Meng, X. Wang, Q. Xu, Z. Li, Z. Liu et al., In situ observation of crystallization dynamics and grain orientation in sequential deposition of metal halide perovskites. Adv. Funct. Mater. 29, 1902319 (2019). 10.1002/adfm.201902319

[62] [62] M.A. Mahmud, H.T. Pham, T. Duong, Y. Yin, J. Peng et al., Combined bulk and surface passivation in dimensionally engineered 2D–3D perovskite films via chlorine diffusion. Adv. Funct. Mater. 31, 2104251 (2021). 10.1002/adfm.202104251

[63] [63] Y. Yu, C. Wang, C.R. Grice, N. Shrestha, D. Zhao et al., Synergistic effects of lead thiocyanate additive and solvent annealing on the performance of wide-bandgap perovskite solar cells. ACS Energy Lett. 2, 1177–1182 (2017). 10.1021/acsenergylett.7b00278

[64] [64] H. Zhang, M. Kramarenko, G. Martínez-Denegri, J. Osmond, J. Toudert et al., Formamidinium incorporation into compact lead iodide for low band gap perovskite solar cells with open-circuit voltage approaching the radiative limit. ACS Appl. Mater. Interfaces 11, 9083–9092 (2019). 10.1021/acsami.8b20899

[65] [65] J. Zhuang, P. Mao, Y. Luan, X. Yi, Z. Tu et al., Interfacial passivation for perovskite solar cells: the effects of the functional group in phenethylammonium iodide. ACS Energy Lett. 4, 2913–2921 (2019). 10.1021/acsenergylett.9b02375

[66] [66] P. Liu, Z. Yu, N. Cheng, C. Wang, Y. Gong et al., Low-cost and Efficient Hole-Transport-Material-free perovskite solar cells employing controllable electron-transport layer based on P25 nanoparticles. Electrochim. Acta 213, 83–88 (2016). 10.1016/j.electacta.2016.07.095

[67] [67] J. He, C.F. Ng, K. Young Wong, W. Liu, T. Chen, Photostability and moisture stability of CH3 NH3 PbI3-based solar cells by ethyl cellulose. ChemPlusChem 81, 1292–1298 (2016). 10.1002/cplu.201600415

[68] [68] H.-Y. Chu, J.-Y. Hong, C.-F. Huang, J.-Y. Wu, T.-L. Wang et al., Enhanced photovoltaic properties of perovskite solar cells by the addition of cellulose derivatives to MAPbI3 based photoactive layer. Cellulose 26, 9229–9239 (2019). 10.1007/s10570-019-02724-2

[69] [69] P. Zhang, N. Gu, L. Song, W.-H. Chen, P. Du et al., Bifunctional green cellulose derivatives employed for high efficiency and stable perovskite solar cells under ambient environment. J. Alloys Compd. 886, 161247 (2021). 10.1016/j.jallcom.2021.161247

[70] [70] B. Xiao, Y. Qian, X. Li, Y. Tao, Z. Yi et al., Enhancing the stability of planar perovskite solar cells by green and inexpensive cellulose acetate butyrate. J. Energy Chem. 76, 259–265 (2023). 10.1016/j.jechem.2022.09.039

[71] [71] Z. Zhang, C. Wang, F. Li, L. Liang, L. Huang et al., Bifunctional cellulose interlayer enabled efficient perovskite solar cells with simultaneously enhanced efficiency and stability. Adv. Sci. 10, e2207202 (2023). 10.1002/advs.202207202

[72] [72] J. Liu, N. Liu, G. Li, Y. Wang, Z. Wang et al., Cinnamate-functionalized cellulose nanocrystals as interfacial layers for efficient and stable perovskite solar cells. ACS Appl. Mater. Interfaces 15, 1348–1357 (2023). 10.1021/acsami.2c19193

[73] [73] F. Wu, S. Mabrouk, M. Han, Y. Tong, T. Zhang et al., Effects of electron- and hole-current hysteresis on trap characterization in organo-inorganic halide perovskite. J. Energy Chem. 76, 414–420 (2023). 10.1016/j.jechem.2022.10.011

[74] [74] E.A. Duijnstee, J.M. Ball, V.M. Le Corre, L.J.A. Koster, H.J. Snaith et al., Toward understanding space-charge limited current measurements on metal halide perovskites. ACS Energy Lett. 5, 376–384 (2020). 10.1021/acsenergylett.9b02720

[75] [75] B. Liu, Y. Wang, Y. Wu, Y. Zhang, J. Lyu et al., Vitamin natural molecule enabled highly efficient and stable planar n–p homojunction perovskite solar cells with efficiency exceeding 24.2%. Adv. Energy Mater. 13, 2203352 (2023). 10.1002/aenm.202203352

[76] [76] S.M. Abdulrahim, Z. Ahmad, J. Bahadra, N.J. Al-Thani, Electrochemical impedance spectroscopy analysis of hole transporting material free mesoporous and planar perovskite solar cells. Nanomaterials (Basel) 10, 1635 (2020). 10.3390/nano10091635

[77] [77] Y. Liu, M. Bag, L.A. Renna, Z.A. Page, P. Kim et al., Understanding interface engineering for high-performance fullerene/perovskite planar heterojunction solar cells. Adv. Energy Mater. 6, 1501606 (2016). 10.1002/aenm.201501606

[78] [78] G. Xu, P. Bi, S. Wang, R. Xue, J. Zhang et al., Integrating ultrathin bulk-heterojunction organic semiconductor intermediary for high-performance low-bandgap perovskite solar cells with low energy loss. Adv. Funct. Mater. 28, 1804427 (2018). 10.1002/adfm.201804427

[79] [79] K. Liu, S. Rafique, S.F. Musolino, Z. Cai, F. Liu et al., Covalent bonding strategy to enable non-volatile organic cation perovskite for highly stable and efficient solar cells. Joule 7, 1033–1050 (2023). 10.1016/j.joule.2023.03.019

Tools

Get Citation

Copy Citation Text

Yirong Wang, Yaohui Cheng, Chunchun Yin, Jinming Zhang, Jingxuan You, Jizheng Wang, Jinfeng Wang, Jun Zhang. Manipulating Crystal Growth and Secondary Phase PbI2 to Enable Efficient and Stable Perovskite Solar Cells with Natural Additives[J]. Nano-Micro Letters, 2024, 16(1): 183

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Research Articles

Received: Jan. 2, 2024

Accepted: Mar. 15, 2024

Published Online: Jan. 23, 2025

The Author Email: Zhang Jinming (zhjm@iccas.ac.cn), Wang Jizheng (jizheng@iccas.ac.cn)

DOI:10.1007/s40820-024-01400-w

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology

微信扫一扫：分享