Journal of the Chinese Ceramic Society, Volume. 50, Issue 3, 742(2022)

Effect of Cr2O3 Addition on Microstructure and Mechanical Properties of ZTA Composite Ceramics

WANG Zekai1,*... ZHU Lihui1, ZHANG Zhaoquan2, FAN Wugang2, WANG Xiaojiao2, LIANG Suoxian2, KANG Longwu2 and HUANG Yingpu3 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(26)

    [1] [1] WADA M, SEKION T, KUSUNOSE T, et al. Effects of fine alumina dispersion on ionic conductivity and mechanical properties of ytterbia stabilized cubic zirconia[J]. Mater Res Innovations, 2004, 8(2): 115-120.

    [2] [2] ZENG P. Biocompatible alumina ceramic for total hip replacement[J]. Mater Sci Technol, 2008, 24(5): 505-516.

    [3] [3] KUMAR A S, DURAI A R, SORNAKUMAR T. Machinability of hardened steel using alumina based ceramic cutting tools[J]. Int J Refract Met Hard, 2003, 21(3): 109-117.

    [4] [4] JIN P, GAO Y L, LIU N, et al. Design and fabrication of alumina micro reciprocating engine [J]. J Harbin Inst Technol, 2008, 15(6): 801-804.

    [7] [7] MANSHOR H, ARIS S M, AZHAR A Z A, et al. Effects of TiO2 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina ceramic composite[J]. Ceram Int, 2015, 41(3): 3961-3967.

    [9] [9] TAN P, YANG Y, SUI Y D, et al. Influence of CeO2 addition on the microstructure and mechanical properties of Zirconia-toughened alumina (ZTA) composite prepared by spark plasma sintering[J]. Ceram Int, 2020, 46(6): 7510-7516.

    [10] [10] MAHMOOD A A, GAFUR M, HOQUE M. Effect of MgO on the physical, mechanical and microstructural properties of ZTA-TiO2 composites[J]. Mater Sci Eng A, 2017, 707: 117-124.

    [11] [11] AZHAR A Z A, SHAWAL S H MSKT, MANSHOR H, et al. The effects of CeO2 addition on the physical and microstructural properties of ZTA-TiO2 ceramics composite[J]. J Alloys Compd, 2019, 773: 27-33.

    [12] [12] SUI Y D, HAN L N, JIANG Y H, et al. Influence of Er2O3 content on microstructure and mechanical properties of ZTA-TiO2 composites[J]. J Rare Earths, 2019, 27(3): 299-304.

    [13] [13] SUI Y D, HAN L N, JIANG Y H, et al. Effect of Ta2O5 addition on the microstructure and mechanical properties of TiO2-added yttria-stabilized zirconia-toughened alumina (ZTA) composites[J]. Ceram Int, 2018, 44: 14811-14816.

    [14] [14] SKTANI Z D I, AZHAR A Z A, RATNAM M M, et al. The influence of in-situ formation of hibonite on the properties of zirconia toughened alumina (ZTA) composites[J]. Ceram Int, 2014, 40(4): 6211-6217.

    [15] [15] SKTANI Z D I, RATNAM M M, AHMAD Z A. Influence of combined CaO and CaCO3 additions on the microstructure and properties of ZTA[J]. J Australas Ceram Soc, 2016, 52(1): 167-176.

    [16] [16] AHMAD Z A, REJAB N A, SKTANI Z D I. Tougher and harder zirconia toughened alumina (ZTA) composites through in situ microstructural formation of LaMgAl11O19[J]. Int J Refract Met Hard, 2019, 79: 60-68.

    [17] [17] RIU D H, KONG Y M, KIM H E. Effect of Cr2O3 addition on microstructural evolution and mechanical properties of Al2O3[J]. J Eur Ceram Soc, 2000, 20(10): 1475-1481.

    [18] [18] AZHAR A Z A, MOHAMAD H, RATNAM M M, et al. The effects of MgO addition on microstructure, mechanical properties and wear performance of zirconia-toughened alumina cutting inserts[J]. J Alloys Compd, 2010, 497(1): 316-320.

    [19] [19] NIIHARA K. A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics[J]. J Mater Sci Lett, 1983, 2(5): 221-223.

    [20] [20] AZHAR A Z A, CHOONG L C, MOHAMED H, et al. Effects of Cr2O3 addition on the mechanical properties, microstructure and wear performance of zirconia-toughened-alumina (ZTA) cutting inserts[J]. J Alloys Compd, 2011, 513: 91-96.

    [21] [21] STUBICAN V S, HUZINEC G, DAMJANOVIC D. Diffusion of 51Cr in surface layer of magnesia, alumina, and spinel[J]. J Am Ceram Soc, 1985, 68(4): 181-184.

    [22] [22] STUBICAN V S, OSENBACH J W. Grain-boundary and lattice diffusion of 51Cr in alumina and spinel[J]. J Am Ceram Soc, 1984, 406-417.

    [23] [23] BRILLANTE A, MAGNANI G. Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia-alumina composite[J]. J Eur Ceram Soc, 2005, 25(15): 3383-3392.

    [24] [24] HERNANDEZ M, GONZALEZ M, PABLOS A D. C-diffusion during hot press in the Al2O3-Cr2O3 system[J]. Acta Materialia, 2003, 51(1): 217-228.

    [25] [25] HIRATA T, AKIYAMA K, YAMAMOTO H. Sintering behavior of Cr2O3-Al2O3 ceramics[J]. J Eur Ceram Soc, 2000, 20(2): 195-199.

    [26] [26] ZHANG Y, GUO W M, JIANG Z B, et al. Dense high-entropy boride ceramics with ultra-high hardness[J]. Scripta Mater, 2019, 164: 135-139.

    [27] [27] MANSHOR H, AZHAR A Z A, RASHID R A, et al. Effects of Cr2O3 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina added with TiO2 (ZTA-TiO2) ceramic composite[J]. Int J Refract Met Hard, 2016, 61(3): 40-45.

    [28] [28] XIA J F, NIAN H Q, LIU W, et al. Effect of Cr2O3 derived from Cr(NO3)3·9H2O precursor on the densification and mechanical properties of zirconia-toughened alumina (ZTA) composites[J]. Ceram Int, 2016, 42(7): 9116-9124.

    [29] [29] REJAB N A, AZHAR A Z A, RATNAM M M, et al. The effects of CeO2 addition on the physical, microstructural and mechanical properties of yttria stabilized zirconia toughened alumina (ZTA)[J]. Int J Refract Met Hard, 2013, 36: 162-166.

    Tools

    Get Citation

    Copy Citation Text

    WANG Zekai, ZHU Lihui, ZHANG Zhaoquan, FAN Wugang, WANG Xiaojiao, LIANG Suoxian, KANG Longwu, HUANG Yingpu. Effect of Cr2O3 Addition on Microstructure and Mechanical Properties of ZTA Composite Ceramics[J]. Journal of the Chinese Ceramic Society, 2022, 50(3): 742

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Jul. 6, 2021

    Accepted: --

    Published Online: Nov. 11, 2022

    The Author Email: Zekai WANG (2277293735@qq.com)

    DOI:10.14062/j.issn.0454-5648.20210549

    Topics