[1] T HUANG, Y T KANG, S J DU et al. A survey of modeling and control in ball screw feed-drive system. The International Journal of Advanced Manufacturing Technology, 121, 2923-2946(2022).

[2] J C YANG, C Y LI, M T XU et al. Nonlinear dynamic characteristics of ball screw feed system under thermal deformation. Nonlinear Dynamics, 107, 1965-1987(2022).

[3] K WANG, C G ZHOU et al. Investigation of the transmission accuracy of ball screw considering errors and preloading level. The International Journal of Advanced Manufacturing Technology, 118, 3917-3932(2022).

[4] J LIU, H T FENG, C G ZHOU. Static load distribution and axial static contact stiffness of a preloaded double-nut ball screw considering geometric errors. Mechanism and Machine Theory, 167, 104460(2022).

[5] Y S ZHANG, C G ZHOU, H T FENG. A meticulous friction torque model for a lubricated ball screw considering the surface roughness. Tribology International, 109014(2023).

[6] L C ZHANG, C G ZHOU. Experimental study on the coefficient of friction of the ball screw. Journal of Tribology, 144(2022).

[7] [7] 曾石蔷. 滚珠丝杠副螺旋滚道检测关键技术与分析［D］. 南京： 南京理工大学， 2020.ZENGS Q. Key Technology and Analysis of Spiral Raceway Detection of Ball Screw Pair［D］.Nanjing： Nanjing University of Science and Technology， 2020. （in Chinese）

[8] T KAGIWADA, H HARADA. Method for ball screw generation without form-dressing. Transactions of the Japan Society of Mechanical Engineers Series C, 62, 1612-1618(1996).

[9] [9] 潘映伶， 纪荣祎， 祁勤， 等. 高速高精度实时相位式激光测距系统［J］. 光学 精密工程， 2023， 31（16）： 2343-2351. doi: 10.37188/OPE.20233116.2343PANY L， JIR Y， QIQ， et al. High-speed and high-precision real-time phase laser ranging system［J］. Optics and Precision Engineering， 2023， 31（16）： 2343-2351.（in Chinese）. doi: 10.37188/OPE.20233116.2343

[10] [10] 吕启鑫， 石芳媛， 白倩， 等. 石英玻璃亚表面微裂纹的偏振激光散射检测方法［J］. 光学 精密工程， 2023， 31（14）： 2031-2039. doi: 10.37188/OPE.20233114.2031LÜQ X， SHIF Y， BAIQ， et al. Polarized laser scattering detection method for subsurface microcracks in quartz glass［J］. Optics and Precision Engineering， 2023， 31（14）： 2031-2039.（in Chinese）. doi: 10.37188/OPE.20233114.2031

[11] [11] 王世峰， 赵馨， 佟首峰， 等. 基于激光位移检测技术的螺纹检测仪研制［J］. 仪器仪表学报， 2007， 28（4）： 755-759. doi: 10.3321/j.issn:0254-3087.2007.04.035WANGSH F， ZHAOX， TONGSH F， et al. Development of screwthread detector based on laser probing displacement technique［J］. Chinese Journal of Scientific Instrument， 2007， 28（4）： 755-759.（in Chinese）. doi: 10.3321/j.issn:0254-3087.2007.04.035

[12] H T FENG, Y L WANG, C M LI et al. An automatic measuring method and system using a light curtain for the thread profile of a ballscrew. Measurement Science and Technology, 22, -085114(2011).

[13] M C HUANG, C C TAI. The pre-processing of data points for curve fitting in reverse engineering. The International Journal of Advanced Manufacturing Technology, 16, 635-642(2000).

[14] [14] 荣乾锋. 内外螺旋滚道型面检测方法与装置研究［D］. 南京： 南京理工大学， 2017.RONGQ F. Research on Method and Device for Detecting Inner and Outer Spiral Raceway Profile［D］.Nanjing： Nanjing University of Science and Technology， 2017. （in Chinese）

[15] [15] 陈明晶， 方源敏， 陈杰. 最小二乘法和迭代法圆曲线拟合［J］. 测绘科学， 2016， 41（1）： 194-197， 202. doi: 10.16251/j.cnki.1009-2307.2016.01.038CHENM J， FANGY M， CHENJ. Fitting of circular curve based on least square method and iterative method［J］. Science of Surveying and Mapping， 2016， 41（1）： 194-197， 202.（in Chinese）. doi: 10.16251/j.cnki.1009-2307.2016.01.038

[16] [16] 何怡刚， 李凯伟， 朋张胜， 等. 基于改进最小二乘支持向量机的IGBT模块键合线状态评估方法研究［J］. 电子测量与仪器学报， 2019， 33（9）： 170-176.HEY G， LIK W， PENGZH SH， et al. Research on condition assessment of wire bonding in IGBT modules based on improved LS-SVM［J］. Journal of Electronic Measurement and Instrumentation， 2019， 33（9）： 170-176.（in Chinese）