Journal of Inorganic Materials, Volume. 36, Issue 4, 436(2021)

3D Printed Zirconia Ceramics via Fused Deposit Modeling and Its Mechanical Properties

Li ZHANG1... Xianfeng YANG1,*, Xiewen XU1, Jinyu GUO1, Zhe ZHOU1, Peng LIU1 and Zhipeng XIE2 |Show fewer author(s)
Author Affiliations
  • 11. School of Materials Science and Engineering, Changsha University of Science & Technology, Changsha 410114,China
  • 22. Department of Materials Science and Engineering, State Key Laboratory of New Ceramic and Fine Processing, Tsinghua university, Beijing 100083, China
  • show less
    References(15)

    [1] W CHEN Z, Y LI Z, J LI J et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 39, 661-687(2019).

    [3] Y NIU F, J WU D, F LU et al. Microstructure and macro properties of Al2O3 ceramics prepared by laser engineered net shaping. Ceramics International, 44, 14303-14310(2018).

    [4] W HALLORAN J. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization. Annual Review of Materials Research, 46, 19-40(2016).

    [5] B LI X, H ZHONG, X ZHANG J et al. Powder characteristics on the rheological performance of resin-based zirconia suspension for stereolithography. Journal of Inorganic Materials, 35, 231-235(2020).

    [6] E FEILDEN, E G T BLANCA, F GIULIANI et al. Robocasting of structural ceramic parts with hydrogel inks. Journal of the European Ceramic Society, 36, 2525-2533(2016).

    [7] E BENARFA B A, S NETO A, M MIRANDA I et al. Robocasting: prediction of ink printability in solgel bioactive glass. Journal of the American Ceramic Society, 102, 1608-1618(2019).

    [8] L HE Q, J JIE, F YANG X et al. Additive manufacturing of dense zirconia ceramics by fused deposition modeling via screw extrusion. Journal of the European Ceramic Society, 41, 1033-1040(2021).

    [9] S CANO, J GONZALEZ-GUTIERREZ, J SAPKOTA et al. Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: selection of binder formulation. Additive Manufacturing, 26, 117-128(2019).

    [10] L GORJAN, R TONELLO, T SEBASTIAN et al. Fused deposition modeling of mullite structures from a preceramic polymer and gamma-alumina. Journal of the European Ceramic Society, 39, 2463-2471(2019).

    [11] A ARNESANO, K PADMANABHAN S, A NOTARANGELO et al. Fused deposition modeling shaping of glass infiltrated alumina for dental restoration. Ceramics International, 46, 2206-2212(2020).

    [12] P KIM N, D CHO, M ZIELEWSKI. Optimization of 3D printing parameters of screw type extrusion (STE) for ceramics using the taguchi method. Ceramics International, 45, 2351-2360(2019).

    [13] U SCHEITHAUER, E SCHWARZER, J RICHTER H et al. Thermoplastic 3D printing-An additive manufacturing method for producing dense ceramics. International Journal of Applied Ceramic Technology, 12, 26-31(2015).

    [14] B LI J, G XIE Z, H ZHANG X et al. Study of metal powder extrusion and accumulating rapid prototyping. Key Engineering Materials, 443, 81-86(2010).

    [15] E RYSHKEWITCH. Compression strength of porous sintered alumina and zirconia. Journal of the American Ceramic Society, 36, 65-68(1953).

    Tools

    Get Citation

    Copy Citation Text

    Li ZHANG, Xianfeng YANG, Xiewen XU, Jinyu GUO, Zhe ZHOU, Peng LIU, Zhipeng XIE. 3D Printed Zirconia Ceramics via Fused Deposit Modeling and Its Mechanical Properties[J]. Journal of Inorganic Materials, 2021, 36(4): 436

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: RESEARCH PAPER

    Received: Sep. 22, 2020

    Accepted: --

    Published Online: Nov. 24, 2021

    The Author Email: YANG Xianfeng (yangxfcsust@csust.edu.cn)

    DOI:10.15541/jim20200560

    Topics