[1] [1] NADESAN M S, DINAKAR P. Structural concrete using sintered flyash lightweight aggregate: a review［J］. Construction and Building Materials, 2017, 154: 928-944.

[2] [2] TAJRA F, ELRAHMAN M A, STEPHAN D. The production and properties of cold-bonded aggregate and its applications in concrete: a review［J］. Construction and Building Materials, 2019, 225: 29-43.

[3] [3] TANG P, XUAN D X, CHENG H W, et al. Use of CO2 curing to enhance the properties of cold bonded lightweight aggregates (CBLAs) produced with concrete slurry waste (CSW) and fine incineration bottom ash (IBA)［J］. Journal of Hazardous Materials, 2020, 381: 120951.

[4] [4] TUNCEL E Y, PEKMEZCI B Y. A sustainable cold bonded lightweight PCM aggregate production: its effects on concrete properties［J］. Construction and Building Materials, 2018, 181: 199-216.

[5] [5] TAJRA F, ELRAHMAN M A, CHUNG S Y, et al. Performance assessment of core-shell structured lightweight aggregate produced by cold bonding pelletization process［J］. Construction and Building Materials, 2018, 179: 220-231.

[7] [7] GOMATHI P, ANANDAN S. Crushing strength properties of furnace slag-fly ash blended lightweight aggregates［J］. ARPN Journal of Engineering and Applied Sciences, 2013, 8: 246-251.

[8] [8] JIANG Y, LING T C, SHI M J. Strength enhancement of artificial aggregate prepared with waste concrete powder and its impact on concrete properties［J］. Journal of Cleaner Production, 2020, 257: 120515.

[10] [10] JIANG Y, LING T C. Production of artificial aggregates from steel-making slag: influences of accelerated carbonation during granulation and/or post-curing［J］. Journal of CO2 Utilization, 2020, 36: 135-144.

[11] [11] GAO Y, DE SCHUTTER G, YE G, et al. The ITZ microstructure, thickness and porosity in blended cementitious composite: effects of curing age, water to binder ratio and aggregate content［J］. Composites Part B: Engineering, 2014, 60: 1-13.

[12] [12] ZHU Y G, KOU S C, POON C S, et al. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete［J］. Cement and Concrete Composites, 2013, 35(1): 32-38.

[13] [13] SHAYAN A, XU A. Performance and properties of structural concrete made with recycled concrete aggregate［J］. ACI Materials Journal, 2003, 100(5): 371-380.

[14] [14] ZHANG H R, LIU W S, LIN X J, et al. To ameliorate the performance of recycled aggregate concrete (RAC) by pre-treating aggregate in sulfoaluminate cement slurry and water glass solution［J］. Journal of Building Engineering, 2021, 44: 103364.

[15] [15] GESOLU M, ZTURAN T, GNEYISI E. Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates［J］. Construction and Building Materials, 2007, 21(9): 1869-1878.

[18] [18] ZHANG H R, JI T, LIU H, et al. Modifying recycled aggregate concrete by aggregate surface treatment using sulphoaluminate cement and basalt powder［J］. Construction and Building Materials, 2018, 192: 526-537.

[19] [19] OUYANG K, LIU J H, LIU S H, et al. Influence of pre-treatment methods for recycled concrete aggregate on the performance of recycled concrete: a review［J］. Resources, Conservation and Recycling, 2023, 188: 106717.

[20] [20] ZHAN B J, XUAN D X, POON C S, et al. Characterization of interfacial transition zone in concrete prepared with carbonated modeled recycled concrete aggregates［J］. Cement and Concrete Research, 2020, 136: 106175.

[21] [21] SPAETH V, DJERBI TEGGUER A. Improvement of recycled concrete aggregate properties by polymer treatments［J］. International Journal of Sustainable Built Environment, 2013, 2(2): 143-152.