[1] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[2] Chen Y, Lu F G, Zhang K et al. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling[J]. Journal of Alloys and Compounds, 670, 312-321(2016).

[3] Zhang Y C, Yang L, Lu W Z et al. Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition[J]. Materials Science and Engineering: A, 771, 138580(2020).

[4] Wu Y, Liu Y, Chen W J et al. Research status and development direction of extreme high-speed laser material deposition[J]. Electric Welding Machine, 50, 1-10, 140(2020).

[5] Schopphoven T, Gasser A, Wissenbach K et al. Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying[J]. Journal of Laser Applications, 28, 022501(2016).

[6] Wang H J, Zhang W, Peng Y B et al. Microstructures and wear resistance of FeCoCrNi-Mo high entropy alloy/diamond composite coatings by high speed laser cladding[J]. Coatings, 10, 300-314(2020).

[7] Schopphoven T, Gasser A, Backes G. EHLA: extreme high-speed laser material deposition[J]. Laser Technik Journal, 14, 26-29(2017).

[8] Schopphoven T, Pirch N, Mann S et al. Statistical/numerical model of the powder-gas jet for extreme high-speed laser material deposition[J]. Coatings, 10, 416-432(2020).

[9] Schopphoven T, Schleifenbaum J H, Tharmakulasingam S et al. Setting sights on a 3D process[J]. Photonics Views, 16, 64-68(2019).

[10] Xu J, Zhou J Y, Ren W B et al. Inconel 718 coating process for laser remanufacturing three-dimensional forming of K418 blades[J]. Laser & Optoelectronics Progress, 57, 031401(2020).

[11] Wang Y, Huang Y L, Yang Y Q. Numerical simulation on coaxial powder feeding laser directional energy deposition of IN718[J]. Chinese Journal of Lasers, 48, 0602115(2021).

[12] Chen B, Mazumder J. Role of process parameters during additive manufacturing by direct metal deposition of Inconel 718[J]. Rapid Prototyping Journal, 23, 919-929(2017).

[13] Petrat T, Brunner-Schwer C, Graf B et al. Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition[J]. Procedia Manufacturing, 36, 256-266(2019).

[14] Zhang Q L, Yao J H, Mazumder J. Laser direct metal deposition technology and microstructure and composition segregation of Inconel 718 superalloy[J]. Journal of Iron and Steel Research, International, 18, 73-78(2011).

[15] Gharbi M, Peyre P, Gorny C et al. Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy[J]. Journal of Materials Processing Technology, 213, 791-800(2013).

[16] Tan H, Hu G, Zhang F Y et al. Formation mechanism of adhering powder and improvement of the surface quality during laser solid forming[J]. The International Journal of Advanced Manufacturing Technology, 86, 1329-1338(2016).

[17] Alimardani M, Fallah V, Iravani-Tabrizipour M et al. Surface finish in laser solid freeform fabrication of an AISI 303L stainless steel thin wall[J]. Journal of Materials Processing Technology, 212, 113-119(2012).

[18] Zhu G X, Li D C, Zhang A F et al. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition[J]. Optics & Laser Technology, 44, 349-356(2012).

[19] Pi G, Zhang A F, Zhu G X et al. Self-regulation-effect in laser direct metal manufacturing[J]. Journal of Xi’an Jiaotong University, 44, 77-81(2010).

[20] Bi G J, Gasser A, Wissenbach K et al. Characterization of the process control for the direct laser metallic powder deposition[J]. Surface and Coatings Technology, 201, 2676-2683(2006).

[21] Liu J C, Li L J. In-time motion adjustment in laser cladding manufacturing process for improving dimensional accuracy and surface finish of the formed part[J]. Optics & Laser Technology, 36, 477-483(2004).

[22] Chen Y. Studies on formation mechanism and control methods of cracking in laser additive manufactured Inconel 718 alloy[D](2017).

[23] Ma M M, Wang Z M, Zeng X Y. Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy[J]. Materials Characterization, 106, 420-427(2015).

[24] Henry M M. Experimental study of process parameters setting in laser additive manufacturing for the repair of Inconel 718 Turbofan[D](2017).

[25] Dai J, Wang E T, Zhang Q S et al. Columnar crystal structure of Ni based alloy fabricated by laser additive manufacturing[J]. Applied Laser, 37, 813-818(2017).

[26] Li Y M, Fan F J, Han J W. Effect of process parameters on laser-cladded 718 alloy coating[J]. Journal of Lanzhou University of Technology, 44, 7-14(2018).

[27] Xiao H. Microstructure control and its mechanisms during laser additive manufacturing of Inconel 718[D](2017).

[28] Zhou C. Study on the molten-pool geometry and solidification parameters of laser additive manufactured Inconel 718[D](2018).

[29] Amine T, Newkirk J W, Liou F. Investigation of effect of process parameters on multilayer builds by direct metal deposition[J]. Applied Thermal Engineering, 73, 500-511(2014).

[30] Ma C F. Study on the element segregation control of Inconel 718 superalloys by laser additive manufacturing[D](2019).

[31] Fang J X, Wang Y J, Dong S Y et al. Microstructure and mechanics properties of interfaces between laser cladded Inconel718 coating and substrate[J]. China Mechanical Engineering, 30, 2108-2113(2019).

[32] Nie P L, Ojo O A, Li Z G. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy[J]. Acta Materialia, 77, 85-95(2014).

[33] Mukherjee T, Manvatkar V, De A et al. Dimensionless numbers in additive manufacturing[J]. Journal of Applied Physics, 121, 064904(2017).

[34] Qi H, Azer M, Ritter A. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured Inconel 718[J]. Metallurgical and Materials Transactions A, 40, 2410-2422(2009).

[35] Johnson A S, Shao S, Shamsaei N et al. Microstructure, fatigue behavior, and failure mechanisms of direct laser-deposited Inconel 718[J]. JOM, 69, 597-603(2017).

[36] Kuriya T, Koike R, Mori T et al. Relationship between solidification time and porosity with directed energy deposition of Inconel 718[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 12, JAMDSM0104(2018).

[37] Xie J. Study on the process of gradient microstructure in a nickel-based alloy by laser additive manufacturing[D](2018).

[38] Xi M Z, Gao S Y. Research on tensile properties of Inconel 718 superalloy fabricated by laser rapid forming process[J]. Chinese Journal of Lasers, 39, 0303004(2012).

[39] Tabernero I, Lamikiz A, Martínez S et al. Evaluation of the mechanical properties of Inconel 718 components built by laser cladding[J]. International Journal of Machine Tools and Manufacture, 51, 465-470(2011).

[40] Kelley P F, Saigal A, Carter A. Fatigue behaviour of direct metal laser sintered Inconel 718[J]. International Journal of Precision Technology, 6, 277-288(2016).

[41] Li L Q, Shen F M, Zhou Y D et al. Comparative study of stainless steel AISI 431 coatings prepared by extreme-high-speed and conventional laser cladding[J]. Journal of Laser Applications, 31, 042009(2019).

[42] Li L Q, Shen F M, Zhou Y D et al. Comparison of microstructure and corrosion resistance of 431 stainless steel coatings prepared by extreme high-speed laser cladding and conventional laser cladding[J]. Chinese Journal of Lasers, 46, 1002010(2019).

[43] Wu Z F, Qian M, Brandt M et al. Ultra-high-speed laser cladding of stellite® 6 alloy on mild steel[J]. JOM, 72, 4632-4638(2020).

[44] Sommer N, Stredak F, Böhm S. High-speed laser cladding on thin-sheet-substrates: influence of process parameters on clad geometry and dilution[J]. Coatings, 11, 952(2021).

[45] Zhou Y D. Research on microstructure and properties of X-M6V wear-resistant coating by extreme-high speed laser cladding on the surface of 45# steel[D](2020).

[46] Tantai F L, Tian H F, Chen F et al. Discussion on application of high-speed laser cladding on 27SiMn hydraulic support column[J]. New Technology & New Process, 52-54(2019).

[47] Qu J Y. Study on preparation technology and temperature field simulation of laser cladding Fe based amorphous alloy coating[D](2020).

[48] Lampa C, Smirnov I. High speed laser cladding of an iron based alloy developed for hard chrome replacement[J]. Journal of Laser Applications, 31, 022511(2019).

[49] Wang S G, Shi T, Fu G Y et al. Analysis of dilution rate and single channel morphology of high-speed cladding Cr50Ni alloy by laser inside-beam powder feeding process[J]. Surface Technology, 49, 311-318(2020).

[50] Wang K M, Du D, Liu G et al. A study on the additive manufacturing of a high chromium Nickel-based superalloy by extreme high-speed laser metal deposition[J]. Optics & Laser Technology, 133, 106504(2021).

[51] Shen B W, Du B R, Wang M H et al. Comparison on microstructure and properties of stainless steel layer formed by extreme high-speed and conventional laser melting deposition[J]. Frontiers in Materials, 6, 248-256(2019).

[52] Li Z H, Li M Y, Han B et al. High-pressure plunger high-speed laser cladding nickel-based alloy coating structure and wear resistance[J]. Surface Technology, 49, 45-54(2020).

[53] Yuan W Y, Li R F, Chen Z H et al. A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings[J]. Surface and Coatings Technology, 405, 126582(2021).

[54] Li Y, Bai R X, Lou L Y et al. Process and microstructure of 1.8 kW high speed laser cladding iron base alloy[C], 77-82(2018).

[55] Zhang Y, Lou L Y, Xu Q L et al. Microstructure and wear resistance of Ni-based WC coating by ultra-high speed laser cladding[J]. Acta Metallurgica Sinica, 56, 1530-1540(2020).

[56] Lou L Y, Zhang Y, Xu Q L et al. Microstructure and properties of metallic coatings with low dilution ratio by high speed laser cladding[J]. China Surface Engineering, 33, 149-159(2020).

[57] Lou L Y, Li C X, Zhang Y et al. Microstructure and surface morphology evolution of FeCr alloy thin coatings deposited by ultra-high speed laser cladding with low laser power[J]. Journal of Yanshan University, 44, 116-124(2020).

[58] Zhou D, Shen Y, Xiong D H et al. Effects of scanning speed and Ni content on the characteristics of high-speed laser-clad coating[J]. Applied Laser, 40, 579-586(2020).

[59] Schaible J, Sayk L, Schopphoven T et al. Development of a high-speed laser material deposition process for additive manufacturing[J]. Journal of Laser Applications, 33, 012021(2021).

[60] Xu X, Du J L, Luo K Y et al. Microstructural features and corrosion behavior of Fe-based coatings prepared by an integrated process of extreme high-speed laser additive manufacturing[J]. Surface and Coatings Technology, 422, 127500(2021).

[61] Li T C, Zhang L L, Bultel G G P et al. Extreme high-speed laser material deposition (EHLA) of AISI 4340 steel[J]. Coatings, 9, 778(2019).

[62] Liu D L, Wang B, Zhou P H et al. Effect of laser power on microstructure and mechanical properties of high-speed laser clad Ni/316L layer[J]. Heat Treatment of Metals, 46, 213-218(2021).

[63] Zheng H B, Wang M H, Ge X Y et al. Influence of ultra-high-speed laser cladding process parameters on the structure and properties of the cladding layer[J]. New Technology & New Process, 63-69(2021).

[64] Shen F M, Tao W, Li L Q et al. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding[J]. Applied Surface Science, 517, 146085(2020).

[65] Cui Z Q, Qin Z, Dong P et al. Microstructure and corrosion properties of FeCoNiCrMn high entropy alloy coatings prepared by high speed laser cladding and ultrasonic surface mechanical rolling treatment[J]. Materials Letters, 259, 126769(2020).

[66] Lou L Y, Zhang Y, Jia Y J et al. High speed laser cladded Ti-Cu-NiCoCrAlTaY burn resistant coating and its oxidation behavior[J]. Surface and Coatings Technology, 392, 125697(2020).

[67] Li F Q, Feng X Y, Chen Y B. Influence of WC content on microstructure of WC/Ni60A laser cladding layer[J]. Chinese Journal of Lasers, 43, 0403009(2016).

[68] Dong H, Han Y, Fu A Q et al. Microstructure and corrosion resistance of Ni/stainless steel surfacing layer deposited via high-speed laser cladding[J]. Surface Technology, 48, 21-27(2019).

[69] Zhao T, Wang Y H, Xu T S et al. Some factors affecting porosity in directed energy deposition of AlMgScZr-alloys[J]. Optics & Laser Technology, 143, 107337(2021).

[70] Kong C Y, Scudamore R J, Allen J. High-rate laser metal deposition of Inconel 718 component using low heat-input approach[J]. Physics Procedia, 5, 379-386(2010).

[71] Wang Y F, Zhao X Y, Lu W J et al. Microstructure and properties of high speed laser cladding stainless steel coating on sucker rod coupling surfaces[J]. Chinese Journal of Lasers, 48, 0602114(2021).

[72] Xiao M Y, Gao H B, Sun L B et al. Microstructure and mechanical properties of Fe-based amorphous alloy coatings prepared by ultra-high speed laser cladding[J]. Materials Letters, 297, 130002(2021).

[73] Yu H H. Research on surface integrity of high-speed laser cladding and post-treatment[D](2020).

[74] Asghar O, Lou L Y, Yasir M et al. Enhanced tribological properties of LA43M magnesium alloy by Ni60 coating via ultra-high-speed laser cladding[J]. Coatings, 10, 638(2020).

[75] Xu Y F, Sun Y N, Wang G J et al. Microstructure and properties of iron-based alloys coatings prepared by high-speed laser cladding[J]. Chinese Journal of Lasers, 48, 1002122(2021).

[76] Ouyang C Y, Bai Q F, Yan X G et al. Microstructure and corrosion properties of laser cladding Fe-based alloy coating on 27SiMn steel surface[J]. Coatings, 11, 552(2021).

[77] Yang J X, Bai B, Ke H et al. Effect of metallurgical behavior on microstructure and properties of FeCrMoMn coatings prepared by high-speed laser cladding[J]. Optics & Laser Technology, 144, 107431(2021).