[1] [1] KAYULOV S V, GUSEV A A, ZAICHIKOV E G, et al.. Drilling of narrow holes in metals by millisecond pulses of Nd∶YAG lasers ［J］. Laser Physics, 1998,8(2):527-531.

[2] [2] BOSTANJOGLO G, SARADY I, BECK TH, et al.. Processing of Ni-based aero engine components with repetitively Q-switched Nd∶YAG-lasers ［J］. SPIE, 1996,2789:145-157.

[3] [3] YEO C Y, TAM S C, JANA S, et al.. A technical review of the laser drilling of aerospace materials ［J］. Journal of Materials Processing Technology, 1994,42(1):15-49.

[4] [4] YANG J, ZHAO Y, ZHU X. Transition between nonthermal and thermal ablation of metallic targets under the strike of high-fluence ultrashort laser pulses ［J］. Applied Physics Letters, 2006,88:094101-1-3.

[5] [5] TUNNA L,O'NEILL W, KHAN A, et al.. Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications ［J］. Optics and Lasers in Engineering, 2005,43(9):937-950.

[6] [6] SCHNEIDER M, MULLER M,FABBRO R, et al.. Study of hole properties in percussion regime with a new analysis method ［J］. JLMN-Journal of Laser Micro/Nanoengineering, 2007,2(2):128-132.

[7] [7] YUAN C J, ZHAI H C, WANG X L, et al.. Lensless digital holography with short-coherence light source for three-dimensional surface contouring of reflecting micro-object［J］. Optics Communications, 2007,270(2):176-179.

[8] [8] YILBAS B S, MANSOOR S B. Laser pulse heating and phase changes in the irradiated region: temperature-dependent thermal properties case ［J］. International Journal of Thermal Sciences, 2009,48(4):761-772.

[9] [9] PARK K W, NA S J. Theoretical investigations on multiple-reflection and Rayleigh absorption-emission-scattering effects in laser drilling ［J］. Applied Surface Science, 2009,256(8):2392-2399.

[10] [10] SAMANT A N, DAHOTRE N B. Computational predictions in single-dimensional laser machining of alumina ［J］. International Journal of Machine Tools and Manufacture, 2008,48(12-13):1345-1353.

[11] [11] NG G K L, CROUSE P L, LI L. An analytical model for laser drilling incorporating effects of exothermic reaction, pulse width and hole geometry ［J］. International Journal of Heat and Mass Transfer, 2006,49(7-8):1358-1374.

[12] [12] MU J Y, WAN H, BAI SH X. Thermal ablation law of cured epoxy under long pulse laser irradiation ［J］. High Power Laser and Particle Beams, 2008,1(1):36-40. (in Chinese)

[13] [13] JIANG Y F, JIANG D, ZHONG M, et al.. Theoretical research: the thermal damage of metal materials, under millisecond-pulsed laser irradiations ［J］. Laser Journal, 2006,27(2):75-76. (in Chinese)

[14] [14] ZHOU Y C. Reverse bulging and plugging in metal foil induced by high power laser ［J］. Journal of Materials Science Letters, 2003,22(1):83-86.

[15] [15] BOLEY C D, CUTTER K P, FOCHS S N, et al.. Interaction of a high-power laser beam with metal sheets ［J］. Journal of Applied Physics, 2010,107:043016-1-5.

[16] [16] WU D J, MA G Y, ZHOU Q J, et al.. Experimental study of bending silicon chip with long pulse width laser［J］. Opt. Precision Eng., 2007,15(9):1361-1365. (in Chinese)

[17] [17] ALLMEN M V. Laser-beam Interactions with Materials Physical Principles and Applications ［M］. Beijing: Science Press, 1994. (in Chinese)

[18] [18] CHAN C L, MAZUMDER J. One-dimensional stead-state model for damage by vaporization and liquid expulsion due to laser-material interaction ［J］. Journal of Applied Physics, 1987,62(11):4579-4586.

[19] [19] SEMAK V, MASUNAWA A. The role of recoil pressure in energy balance during laser materials processing ［J］. Journal of Physics D:Applied Physics, 1997,30(18):2541-2552.

[20] [20] QIN Y,CHEN Y B, NI X W, et al.. Axisymmetric numerical simulation of plastic damage in aluminum alloy induced by long pulsed laser［J］. Optics and Lasers in Engineering, 2010,48(3):361-367.

[21] [21] SHEN Z H,ZHANG S Y, LU J, et al.. Mathematical modeling of laser induced heating and melting in solids ［J］. Optics & Laser Technology, 2001,33(8):533-537.

[22] [22] PELIGRAD A A, ZHOU E, MORTON D, et al.. A melt depth prediction model for quality of laser surface glazing of inhomogeneous materials ［J］. Optics & Laser Technology, 2001,33(1):7-13.

[23] [23] SALONITIS K,STOURNARAS A,TSOUKANTAS G, et al.. A theoretical and experimental investigation on limitations of pulsed laser drilling ［J］. Journal of Material Processing Technology, 2007,183(1):96-103.

[24] [24] SOLANA P, KAPADIA P, DOWDEN J, et al.. Time dependent ablation and liquid ejection processes during the laser drilling of metals ［J］. Optics Communications, 2001,191(1-2):97-112.