[1] SHETTY D K. Modern ceramic engineering-properties, processing, and use in design[J]. NEW YORK: Chemical Weer Assoc, 107(1984).

[2] HAN Y, LI S, ZHU T B et al. An oscillatory pressure sintering of zirconia powder: rapid densification with limited grain growth[J]. Journal of the American Ceramic Society, 2774(2017).

[3] KARIHALOO B L. Contribution of t→m phase transformation to the toughening of ZTA[J]. Journal of the American Ceramic Society, 1703(2010).

[4] GRIFFITH A A. The phenomena of rupture and flow in solids[J]. Philosophical Transactions A, 163(1921).

[5] BAO Y W, SUN Y, KUANG F H et al. Development and prospects of high strength pre-stressed ceramics[J]. Journal of Inorganic Materials, 399(2020).

[6] SUN Y, WU T Y, BAO Y W et al. Preparation and strengthening mechanism of prestressed ceramic tile components[J]. International Journal of Applied Ceramic Technology, 604(2022).

[7] LI H Y, HAO H J, TIAN Y et al. Temperature dependence of flexural strength and residual stress of Al₂O₃ reinforced by kyanite coating[J]. Ceramics International, 28745(2022).

[8] QI Y, BAN C M, HARRIS S J. A new general paradigm for understanding and preventing Li metal penetration through solid electrolytes[J]. Joule, 2599(2020).

[9] YAO X H, OLSSON E, WANG M M et al. Xenon ion implantation induced surface compressive stress for preventing dendrite penetration in solid-state electrolytes[J]. Small, 2108124(2022).

[12] BAO Y W, SU S B, YANG J J et al. Pre-stressed ceramics and improvement of impact resistance[J]. Materials Letters, 518(2002).

[13] BAO Y W, KUANG F H, SUN Y et al. A simple way to make pre-stressed ceramics with high strength[J]. Journal of Materiomics, 657(2019).

[14] MIYAZAKI H, YOSHIZAWA Y. A reinvestigation of the validity of the indentation fracture (IF) method as applied to ceramics[J]. Journal of the European Ceramic Society, 4437(2017).

[16] LI H Y, HAO H J, TIAN Y et al. Effects of residual stresses on strength and crack resistance in ZrO₂ ceramics with alumina coating[J]. Journal of Inorganic Materials, 467(2022).