[1] [1] CAI Y, GONG X F. Research on High Precise Segment Support System of Very Large Telescope ［D］. Nanjing: Nanjing Institute of Astronomical Optics & Technology, Chinese Academy of Sciences, 2014. (in Chinese)

[2] [2] PONSLET E, BLANCO D, CHO M, et al.. Development of the primary mirror segment support assemblies for the thirty meter telescope ［J］. SPIE, 2006, 6279: 379-397.

[3] [3] VDOVING G, SOLOVIEV O. Correction of low order aberrations using continuous deformable mirrors ［J］. Opt. Express, 2008, 16(5): 2859-2866.

[4] [4] CHEN X D, ZHENG L G, LUO X, et al.. A deformable mirror with 9 actuated points for low order aberration correction-design and experiments［J］. Acta Optica Sinica, 2012, 32(3): 197-202. (in Chinese)

[5] [5] MAST T S, NELSON J. Fabrication of large optical surfaces using a combination of polishing and mirror bending ［J］. SPIE, 1990, 1236: 670-681.

[6] [6] HAN L CH. Study on Correction of Semi-Active Optics Technology for Large Optical Flat Mirror based on TMT Tertiary Mirror ［D］. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Science, 2017. (in Chinese)

[7] [7] GONG X F, CUI X Q, YE X ZH. Current progress in the research of LAMOST primary mirror support［J］. SPIE, 2004, 5495: 499-506.

[8] [8] WILLIAMS E, TUBB A, KAMPHUES F. TMT M1 Segment Support Assembly (SSA) Final Design Review［R］.TMT.OPT.PRE.14.024.DRF03: www.tmt.org.

[9] [9] WILLIAMS E, BAFFES C, MAST T S, et al.. Advancement of the segment support system for the thirty meter telescope primary mirror［J］. SPIE, 2008, 7018: 701810.

[10] [10] NIJENHUIS J, HAMELINCK R. The optimization of the opto-mechanical performance of the mirror segments for the E-ELT ［J］. SPIE, 2011, 8336: 83360H.

[11] [11] NIJENUIS J, HEIJMANS J, BREEJE R D, et al.. Designing the primary mirror support for the E-ELT ［J］. SPIE, 2016, 9906: 990616.

[12] [12] SU D Q, LIANG M, YUAN X Y, et al.. A suggested 12-m telescope optical system configuration for China ［J］.MNRAS, 2016, 460: 2286-2295.

[13] [13] SHAO L, ZHAO Y ZH, MING M, et al.. Novel support for 1.2 m Zerodur primary mirror［J］. Opt. Precision Eng., 2016, 24(10): 2462-2470. (in Chinese)

[14] [14] CAI Y, GONG X F. Integrated modeling and analysis of the segment support system of segmented-mirror telescope［J］. Machinery Design & Manufacture, 2014(9): 132-135. (in Chinese)