[1] Aikens D M, Rich L, Bajuk D et al[M]. Developing enabling optics finishing technologies for the National Ignition Facility(1998).

[2] Campbell J H, Hawley-Fedder R A, Stolz C J et al. NIF optical materials and fabrication technologies: an overview[J]. Proceedings of SPIE, 5341, 84-101(2004).

[3] Xu Q, Li W, Wang J et al. Progress of advanced optical manufacturing technology integrated line[J]. Proceedings of SPIE, 6149, 614904(2006).

[4] Guo Y B, Huang Y Q, Tian B et al. Study on compensation of parallel grinding non-axisymmetric aspheric surfaces[J]. Chinese Journal of Mechanical Engineering, 38, 118-121(2002).

[5] Zhou L, Wei Q C, Chen X H et al. Key technologies in high efficiency and ultra precision grinding of large aperture and complex aspheric lens[J]. Proceedings of SPIE, 11342, 1134209(2019).

[6] Wei Q C, Zhou L, Chen X H et al. The effect of grinding processing parameters on aspheric small-scale waviness[J]. Proceedings of SPIE, 11342, 113420C(2019).

[7] Wei Q C, Zhou L, Chen X H et al. Influence of grinding force on aspherical small-scale waviness uniformity based on parallel grinding[J]. Proceedings of SPIE, 11068, 106817(2019).

[8] Fan F, Xu X, Xu Q et al. Progress on ultra precision manufacturing technology of large-aperture high-power laser optics[J]. Opto-Electronic Engineering, 47, 200135(2020).

[9] Shi C C, Wang Z Z, Peng Y F et al. Influence of PM controller parameters on motion accuracy of hydrostatic guideways[J]. Journal of Mechanical Engineering, 56, 157-165(2020).

[10] Shi C C, Wang Z Z, Peng Y F et al. Quasi-static kinematics model for motion errors of closed hydrostatic guideways in ultra-precision machining[J]. Precision Engineering, 71, 90-102(2021).

[11] Xu Q, Wang J, Ma P et al. Progress of advanced optical manufacturing technology[J]. High Power Laser and Particle Beams, 25, 3098-3105(2013).

[12] Zhou L, Wei Q C, Zheng N et al. Dressing technology of arc diamond wheel by roll abrading in aspheric parallel grinding[J]. The International Journal of Advanced Manufacturing Technology, 105, 2699-2706(2019).

[13] Zhou L, An C H, Hou J et al. 3D geometric topographic measurement and error evaluation of arc diamond wheel[J]. Optics and Precision Engineering, 25, 3079-3088(2017).

[14] Wei Q C, Zhou L, Chen X H et al. Research on full-aperture surface shape in situ measurement technology for grinding large diameter optics[J]. Proceedings of SPIE, 11189, 111890P(2019).

[15] Suratwala T I, Feit M D, Steele W A. Toward deterministic material removal and surface figure during fused silica pad polishing[J]. Journal of the American Ceramic Society, 93, 1326-1340(2010).

[16] Pal R K, Garg H, Karar V. Material removal characteristics of full aperture optical polishing process[J]. Machining Science and Technology, 21, 493-525(2017).

[17] Suratwala T, Steele R, Feit M et al. Convergent polishing: a simple, rapid, full aperture polishing process of high quality optical Flats & spheres[J]. Journal of Visualized Experiments, 2014, 51965.

[18] Suratwala T I[M]. Materials science and technology of optical fabrication(2018).

[19] Xie R Q, Zhao S J, Liao D F et al. Recent advances in rapid polishing process of large aperture optical flats[J]. Proceedings of SPIE, 10841, 108410V(2019).

[20] Ban X X, Zhao H Y, Zhu X L et al. Improvement and application of pad conditioning accuracy in chemical mechanical polishing[J]. Optical Engineering, 57, 095102(2018).

[21] Deng H, Endo K, Yamamura K. Damage-free finishing of CVD-SiC by a combination of dry plasma etching and plasma-assisted polishing[J]. International Journal of Machine Tools and Manufacture, 115, 38-46(2017).

[22] Yu G Y, Walker D, Li H Y. Implementing a grolishing process in Zeeko IRP machines[J]. Applied Optics, 51, 6637-6640(2012).

[23] Wang C J, Wang Z Z, Wang Q J et al. Improved semirigid bonnet tool for high-efficiency polishing on large aspheric optics[J]. The International Journal of Advanced Manufacturing Technology, 88, 1607-1617(2017).

[24] Wang C J, Yang W, Wang Z Z et al. Highly efficient deterministic polishing using a semirigid bonnet[J]. Optical Engineering, 53, 095102(2014).

[25] Zhong B, Huang H Z, Chen X H et al. Impact of pad conditioning on the bonnet polishing process[J]. The International Journal of Advanced Manufacturing Technology, 98, 539-549(2018).

[26] Pan R, Zhong B, Chen D J et al. Modification of tool influence function of bonnet polishing based on interfacial friction coefficient[J]. International Journal of Machine Tools and Manufacture, 124, 43-52(2018).

[27] Zhong B, Chen X H, Pan R et al. The effect of tool wear on the removal characteristics in high-efficiency bonnet polishing[J]. The International Journal of Advanced Manufacturing Technology, 91, 3653-3662(2017).

[28] Zhong B, Wang C J, Chen X H et al. Time-varying tool influence function model of bonnet polishing for aspheric surfaces[J]. Applied Optics, 58, 1101-1109(2019).

[29] Zhong B, Chen X H, Deng W H et al. Improving material removal determinacy based on the compensation of tool influence function[J]. Proceedings of SPIE, 10710, 107102P(2018).

[30] Zhong B, Huang H Z, Chen X H et al. Modelling and simulation of mid-spatial-frequency error generation in CCOS[J]. Journal of the European Optical Society-Rapid Publications, 14, 4(2018).

[31] Zhong B, Deng W H, Chen X H et al. Frequency division combined machining method to improve polishing efficiency of continuous phase plate by bonnet polishing[J]. Optics Express, 29, 1597-1612(2021).

[32] Zhong B, Chen X H, Wang J et al. Fabrication and test of high-precision off-axis aspheric lens[J]. Infrared and Laser Engineering, 47, 0718003(2018).

[33] Chen X H, Yu H D, Zhong B et al. Development of key technologies in the fabrication of large aperture off-axis wedge focusing lens[J]. Proceedings of SPIE, 10255, 102551C(2017).

[34] Yellowhair J E. Advanced technologies for fabrication and testing of large flat mirrors[D](2007).

[35] Ren L L, Zhang F H, Liao D F et al. Theoretical model and experimental analysis of non-uniform material removal during full-aperture polishing[J]. The International Journal of Advanced Manufacturing Technology, 101, 137-146(2019).

[36] Chen G K, Yi K, Yang M H et al. Factor effect on material removal rate during phosphate laser glass polishing[J]. Materials and Manufacturing Processes, 29, 721-725(2014).

[37] Liao D F, Xie R Q, Zhao S J et al. Surface shape development of the pitch lap under the loading of the conditioner in continuous polishing process[J]. Journal of the American Ceramic Society, 102, 3129-3140(2019).

[38] Zhao D W, He Y Y, Wang T Q et al. Effect of kinematic parameters and their coupling relationships on global uniformity of chemical-mechanical polishing[J]. IEEE Transactions on Semiconductor Manufacturing, 25, 502-510(2012).

[39] Liao D F, Ren L L, Zhang F H et al. Kinematic model for material removal distribution and surface figure in full-aperture polishing[J]. Applied Optics, 57, 588-593(2018).

[40] Liao D F, Zhang F H, Xie R Q et al. Effect of interfacial friction force on material removal in full aperture continuous polishing process[J]. Precision Engineering, 63, 214-219(2020).

[41] Liao D F, Zhang F H, Xie R Q et al. Deterministic control of material removal distribution to converge surface figure in full-aperture polishing[J]. Journal of Manufacturing Processes, 53, 144-152(2020).

[42] Zhang F H, Wang Y R. Method to improve the surface shape of BK7 glass in full-aperture polishing[J]. Applied Optics, 60, 6910-6917(2021).

[43] Hoon D M. Configuring of lapping and polishing machines[P].

[44] Yin J. Research on on-line detection and control technology of surface shape of polishing disc in ring polishing[D](2018).

[45] An L, Wang W, Liao D F. Static characteristics of air-floating turntable of ultra-precision full-aperture polisher[J]. Optics and Precision Engineering, 29, 1640-1652(2021).

[46] Yin J, Zhu J Q, Jiao X et al. Method of steady-state deterministic polishing based on continuous polishing[J]. Chinese Journal of Lasers, 44, 1102001(2017).

[47] Sun R K, Wang J D, Cheng C et al. Material removal characteristics of polishing pad with small-tool correction[J]. Chinese Journal of Lasers, 47, 0403001(2020).

[48] Hou J, Wang H X, Chen X H et al. Magnetorheological processing for large aperture plane optical elements[J]. Optics and Precision Engineering, 24, 3054-3060(2016).

[49] Huang W, Zhang Y F, Zheng Y C et al. Magnetorheological finishing machine and technique based on two-polishing-head[J]. Journal of Applied Optics, 35, 494-499(2014).

[50] Hou J, Wang H X, Chen X H et al. Effect of magnetorheological processing parameters on polishing spots[J]. Proceedings of SPIE, 10847, 108470P(2018).

[51] Liu S W, Wang H X, Zhang Q H et al. Regionalized modeling approach of tool influence function in magnetorheological finishing process for aspherical optics[J]. Optik, 206, 164368(2020).

[52] Wang Y B, Dai Y F, Hu H et al. Study on rapid convergence strategy of nano-precision optical surface by ion beam figuring[J]. Optics Communications, 507, 127614(2022).

[53] Wang T Y, Huang L, Choi H et al. RISE: robust iterative surface extension for sub-nanometer X-ray mirror fabrication[J]. Optics Express, 29, 15114-15132(2021).

[54] Deng W H, Chen X H, Jin H L et al. Optimization of IBF parameters based on adaptive tool-path algorithm[J]. Proceedings of SPIE, 10710, 107102W(2018).

[55] Wang C J, Wang Z Z, Xu Q. Unicursal random maze tool path for computer-controlled optical surfacing[J]. Applied Optics, 54, 10128-10136(2015).

[56] Dunn C R, Walker D D. Pseudo-random tool paths for CNC sub-aperture polishing and other applications[J]. Optics Express, 16, 18942-18949(2008).

[57] Wan S L, Wei Y C, Hu C et al. Magnetorheological finishing ultra-precision polishing mid-spatial-frequency error tool influence function[J]. International Journal of Machine Tools and Manufacture, 161, 103673(2021).

[58] Wan K P, Wan S L, Jiang C et al. Sparse bi-step raster path for suppressing the mid-spatial-frequency error by fluid jet polishing[J]. Optics Express, 30, 6603-6616(2022).

[59] Shu Y, Nie X, Shi F et al. Smoothing evolution model for computer controlled optical surfacing[J]. Journal of Optical Technology, 81, 164-167(2014).

[60] Kim D W, Park W H, An H K et al. Parametric smoothing model for visco-elastic polishing tools[J]. Optics Express, 18, 22515-22526(2010).

[61] Lei P L, Hou J, Wang J et al. Smoothing of mid-spatial frequency errors by computer controlled surface processing[J]. High Power Laser and Particle Beams, 31, 11-17(2019).

[62] Wang Q G. Study on precision slicing and grinding processes of KDP crystal[D](2010).

[63] Yang X, An C H, Wang Z Z et al. Research on surface topography in ultra-precision flycutting based on the dynamic performance of machine tool spindle[J]. The International Journal of Advanced Manufacturing Technology, 87, 1957-1965(2016).

[64] An C H, Deng C Y, Miao J G et al. Investigation on the generation of the waviness errors along feed-direction on flycutting surfaces[J]. The International Journal of Advanced Manufacturing Technology, 96, 1457-1465(2018).

[65] Wei R C, An C H, Wang Z Z et al. Dynamic performance analysis and quantitative evaluation for ultraprecision aerostatic spindle[J]. Journal of Engineering Manufacture, 234, 218-228(2019).

[66] Deng C Y, An C H, Wei B et al. Investigation on the influence of aerostatic pressure upon surface generation in flycutting[J]. Journal of Engineering Manufacture, 233, 1136-1143(2018).

[67] Wang S F, An C H, Zhang F H et al. Simulation research on the anisotropic cutting mechanism of KDP crystal using a new constitutive model[J]. Machining Science and Technology, 21, 202-222(2017).

[68] Wang S F, An C H, Zhang F H et al. Study on the fracture properties of KDP crystal by nanoscratch experiment and finite element simulation[J]. Journal of Synthetic Crystals, 44, 2325-2329, 2337(2015).

[69] Wang S F, An C H, Zhang F H et al. An experimental and theoretical investigation on the brittle ductile transition and cutting force anisotropy in cutting KDP crystal[J]. International Journal of Machine Tools and Manufacture, 106, 98-108(2016).

[70] Zhang F H, Wang S F, An C H et al. Full-band error control and crack-free surface fabrication techniques for ultra-precision fly cutting of large-aperture KDP crystals[J]. Frontiers of Mechanical Engineering, 12, 193-202(2017).

[71] Menapace J A, Peterson J, Penetrante B et al. Combined advanced finishing and UV laser conditioning process for producing damage resistant optics[P].

[72] Suratwala T I, Miller P E, Bude J D et al. HF-based etching processes for improving laser damage resistance of fused silica optical surfaces[J]. Journal of the American Ceramic Society, 94, 416-428(2011).

[73] Bude J, Miller P, Baxamusa S et al. High fluence laser damage precursors and their mitigation in fused silica[J]. Optics Express, 22, 5839-5851(2014).

[74] Bude J, Carr C W, Miller P E et al. Particle damage sources for fused silica optics and their mitigation on high energy laser systems[J]. Optics Express, 25, 11414-11435(2017).

[75] Zhou L, Xie R Q, Chen X H et al. Analysis and optimization on cross section profile of fused silica grinding wheel[J]. Diamond & Abrasives Engineering, 38, 59-64(2018).

[76] Zhou L, Zheng N, Chen X H et al. Crack depth uniformity control techniques for large scale fused silica optics in grinding process[J]. Proceedings of SPIE, 11068, 1106815(2019).

[77] Zhou L, Wei Q C, Chen X H et al. In-situ detection and evaluation of wear state of micro-powder diamond wheel in optics grinding[J]. Proceedings of SPIE, 11189, 1118904(2019).

[78] Zhou L, Wei Q C, Li J et al. The effect of diamond wheel wear on surface and sub-surface quality in fused silica optics grinding[J]. IOP Conference Series: Materials Science and Engineering, 677, 022091(2019).

[79] Zhou L, Zheng N, Wang J et al. Research on the signal de-noising method of acoustic emission in fused silica grinding[C], 26-32(2018).

[80] Suratwala T I, Steele W A, Wong L L et al. Chemistry and formation of the Beilby layer during polishing of fused silica glass[J]. Journal of the American Ceramic Society, 98, 2395-2402(2015).

[81] Liao D F, Wang J, Zhao S J et al. Analysis of the optic/impurity-particle/pad interaction for reduction of scratches formed on optics during pad polishing[J]. Journal of Non-Crystalline Solids, 391, 96-100(2014).

[82] Li Y G, Yuan Z G, Wang J et al. Laser-induced damage characteristics in fused silica surface due to mechanical and chemical defects during manufacturing processes[J]. Optics & Laser Technology, 91, 149-158(2017).

[83] Ye H, Li Y G, Yuan Z G et al. Laser induced damage characteristics of fused silica optics treated by wet chemical processes[J]. Applied Surface Science, 357, 498-505(2015).

[84] Ye H, Li Y G, Yuan Z G et al. Ultrasonic-assisted wet chemical etching of fused silica for high-power laser systems[J]. International Journal of Applied Glass Science, 9, 288-295(2018).

[85] Manes K R, Spaeth M L, Adams J J et al. Damage mechanisms avoided or managed for NIF large optics[J]. Fusion Science and Technology, 69, 146-249(2016).

[86] Wang S F, Wang J, Lei X Y et al. Simulation of the nanosecond-pulse laser damage of KDP surface by the smoothed particle hydrodynamics method[J]. Optics Letters, 44, 5338-5341(2019).

[87] Wang S F, Wang J, Lei X Y et al. Investigation of the laser-induced surface damage of KDP crystal by explosion simulation[J]. Optics Express, 27, 15142-15158(2019).

[88] Wang S F, Wang J, Xu Q et al. Influences of surface defects on the laser-induced damage performances of KDP crystal[J]. Applied Optics, 57, 2638-2646(2018).

[89] Wang S F, Xu Q, Wang J et al. Methods for surface defect suppression in fly-cutting fabrication of KDP crystals[J]. Acta Optica Sinica, 38, 1116001(2018).