[1] [1] Billig F S. Research on supersonic combustion[J]. J Propuls Power, 1993(9): 499-514.

[2] [2] Bai Chao. The influence of cavity configuration on supersonic flow and combustion process [D]. Tianjin: Hebei University of Technology, 2012. (in Chinese)

[3] [3] Sun Mingbo. Studies on flow patterns and flameholding mechanisms of cavity flameholders in supersonic flows[D].Changsha: National University of Defense Technology, 2008. (in Chinese)

[4] [4] Wu Yun, Li Yinghong. Progress in research of plasma-assisted flow control,ignition and combustion[J]. High Voltage Engineering, 2014, 40(7): 2024-2038. (in Chinese)

[5] [5] He Liming, Liu Xingjian, Zhao Bingbing, et al. Current investigation progress of plasma-assisted ignition and combustion[J]. Journal of Aerospace Power, 2016, 31(7):1537-1551. (in Chinese)

[6] [6] Kimura I, Aoki H, Kato M. The use of a plasma jet for flame stabilization and promotion of combustion in supersonic air flows[J]. Combustion & Flame, 1981, 42(3):297-305.

[7] [7] Takita K, Moriwaki A, Kitagawa T, et al. Ignition and flame-holding of H2 and CH4 in high temperature airflow by a plasma torch[J]. Combustion & Flame, 2003, 132(4):679-689.

[8] [8] Takita K, Ohashi R, Abe N. Suitability of C2-, C3-hydrocarbon fuels for plasma ignition in high-speed flow[J]. Journal of Propulsion & Power, 2009, 25(3): 565-570.

[9] [9] Leonov S B, Kochetov I V, Napartovich A P, et al. Plasma-induced ethylene ignition and flameholding in confined supersonic air fFlow at low temperatures[J]. IEEE Transactions on Plasma Science, 2011, 39(2): 781-787.

[10] [10] Leonov S, Yarantsev D, Napartovich A, et al. Plasma-assisted ignition and flameholding in high-speed flow[C]//AIAA Aerospace Sciences Meeting and Exhibit, 2006, 12: 563.

[11] [11] Song Yanwen, Liu Weixiong, He Wei, et al. Experimental investigation of plasma ignition in supersonic combustor[J]. Journal of Experiments in Fluid Mechanics, 2006, 20(4): 20-24. (in Chinese)

[12] [12] Li Fei, Yu Xilong, Gu Hongbin, et al. Experiment on kerosene fueled scramjet ignition by using plasma torch [J]. Journal of Aerospace Power, 2012, 27(4): 824-831. (in Chinese)

[14] [14] Song Zhenxing, He Liming, Zhang Jianbang, et al. 3D numerical simulation of supersonic plasma ignition process[J]. High Power Laser And Particle Beams, 2012, 24(11):2746-2750. (in Chinese)

[15] [15] Wang H X, Wei F Z, Murphy A B, et al. Numerical investigation of the plasma flow through the constrictor of arc-heated thrusters[J]. Journal of Physics D Applied Physics, 2012, 45(23): 6705-6711.

[16] [16] Zhou Siyin, Che Xueke, Nie Wansheng. Influence of nanosecond pulse dielectric barrier discharge plasma on the cavity performance in scramjet combustor[J]. High Voltage Engineering, 2014, 40(10): 3032-3037. (in Chinese)

[17] [17] Zhou S, Nie W, Che X. Numerical investigation of influence of quasi-dc discharge plasma on fuel jet in scramjet combustor[J]. IEEE Transactions on Plasma Science, 2015, 43(3): 896-905.

[18] [18] Qin Zengyan, Zuo Gongning, Wang Yongrong, et al. High Pressure Pulse Discharge and Its Applications[M]. Beijing:Beijing Industrial University Perss, 2000: 352-355. (in Chinese)

[19] [19] Han Xingsi. Turbulence modeling for supersonic combustion [D]. Hefei: University of Science and Technology of China, 2009. (in Chinese)