[1] YU Daoyin, TAN Hengying[M]. Engineering optics, 27(2016).

[2] GUO Xiarui, LIAO Zhibo, WANG Chunyu等. Aberration and alignment quality investigation of space transmission optical system with centering error of optical axes[J]. Infrared and Laser Engineering, 41, 436-441(2012).

[3] PARK H J, LEE S W, LEE D S. Computer aided measurement and compensation system for focal length of lenses in camera manufacture based on the MTF performance using the line CCD sensor[J]. International Journal of Machine Tools and Manufacture, 40, 1493-1511(2000).

[4] LIU Zijian, YI Guangwei. Research on alignment of coaxial optical system based on global optimization alignment method[J]. Journal of Hunan University （Natural Sciences）, 45, 42-52(2018).

[5] XU Danhui, TANG Xiahui, FANG Guoming等. Method for calibration of optical axis parallelism based on interference fringes[J]. Acta Optica Sinica, 40, 1712005(2020).

[6] DU Yang, GAO Zhishan. Lens centering using high-precision three coordinate measuring machine[J]. Optics and Precision Engineering, 23, 639-644(2015).

[7] CHEN Zhibin, XIAO Wenjian, MA Dongxi等. A method for large distance multi-optical axis parallelism online detection[J]. Acta Optica Sinica, 37(2017).

[8] WANG Zhijian, WANG Peng, LIU Quan[M]. Dynamic optics, 19-22(2015).

[9] LIU Zhiying, SONG Yulong, FU Yuegang等. Tolerance analysis of stitching system based on equivalent nodal point[J]. Acta Photonica Sinica, 40, 1261-1265(2011).

[10] TIAN Liude, LIU Zhaohui, ZHAO Jianke等. Analysis the influence of pyramidal error on the encoder accuracy test by using coordinate transformation[J]. Acta Optica Sinica, 35(2015).

[11] QIAO Guifang, SUN Dalin, SONG Guangming等. A rapid coordinate transformation method for serial robot calibration system[J]. Journal of Mechanical Engineering, 56, 1-8(2020).

[12] SU Guoying, ZHANG Fumin, HAN Yong等. Coaxiality error measurement technology for GNSS antenna connector[J]. Acta Photonica Sinica, 49(2020).

[13] XU Lizhi, YAN Changxiang, LI yi等. Image motion calculation and error distribution for aerial whisk-broom imaging[J]. Optics and Precision Engineering, 27, 2071-2079(2019).

[14] LU Changming, GAO Xin, LI Xiyu等. A method for evaluating medium and high-earth orbit object telescope's precision by Beidou's precise ephemeris[J]. Acta Photonica Sinica, 49, 1012001(2020).

[15] ZHAO Hengxiang, LI Libo, FENG Yutao等. Techniques for on-orbit calibration of space optical imaging systems based on auto-collimation[J]. Acta Photonica Sinica, 50(2021).

[16] MU Xiaokai, SUN Qingchao, SUN Kepeng等. Three-dimensional tolerance modeling and precision analysis of flexible body based on the assembly load[J]. Journal of Mechanical Engineering, 54, 39-48(2018).

[17] WU Zhaoqiang. Stimulated tolerances modeling based on small displacement torsors and tolerances analysis[J]. Machinery Design & Manufacture, 205-207(2010).