Opto-Electronic Engineering, Volume. 42, Issue 5, 45(2015)

Use of the Finite Element Technique to Analyze Thermal Stress in Coating Under Thermal Loading Conditions

SHANG Peng1...2,*, LI Ding1,2, AI Wanjun1 and XIONG Shengming1 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    References(21)

    [1] [1] Yao JK, Huang H L.Investigation on thermal stability of TiO2 films for application at high temperature[J].Surface Engineering(S0267-0844), 2009, 25(2): 116-119.

    [2] [2] Mollart T P, K L Lewis.Transition metal oxide anti-reflection coatings for airborne diamond optics[J].Diamond and Related Materials(S0925-9635), 2001, 10(3): 536-541.

    [3] [3] Teixeira V.Mechanical integrity in PVD coatings due to the presence of residual stresses[J].Thin Solid Films(S0040-6090), 2001, 392(2): 276-281.

    [4] [4] YAO Jianke, FAN Zhengxiu, JIN Yunxia, et al.Investigation of damage threshold to TiO2 coatings at different laser wavelength and pulse duration[J].Thin Solid Films(S0040-6090), 2008, 516(6): 1237-1241.

    [5] [5] LIU Wenjen, GUO Xingjian, Chien Chia-Hung.The study of optical and microstructural evolution of Ta2O5 and SiO2 thin films by plasma ion assisted deposition method[J].Surface and Coatings Technology(S0257-8972), 2005, 196(1): 69-75.

    [6] [6] Atanassova E, Kalitzova M.High temperature-induced crystallization in tantalum pentoxide layers and its influence on the electrical properties[J].Thin Solid Films(S0040-6090), 2003, 426(1): 191-199.

    [7] [7] Grüger H, Kunath C, Kurth E, et al.High quality rf sputtered metal oxides (Ta2O5, HfO2) and their properties after annealing[J].Thin Solid Films(S0040-6090), 2004, 447(1): 509-515.

    [8] [8] Karthikeyan A, Almeida R M.Crystallization of SiO2–TiO2 glassy films studied by atomic force microscopy[J].Journal of Non-crystalline Solids(S0022-3093), 2000, 274(1): 169-174.

    [9] [9] CHAO Shiuh, WANG Wen-Hsiang, Lee Cheng-Chung.Low-loss dielectric mirror with ion-beam-sputtered TiO2-SiO2 mixed films[J].Applied Optics (S1559-128X), 2001, 40(13): 2177-2182.

    [10] [10] WANG Xinrong, Masumoto H, Someno Y, et al.Microstructure and optical properties of amorphous TiO2-SiO2 composite films synthesized by helicon plasma sputtering[J].Thin Solid Films(S0040-6090), 1999, 338(1): 105-109.

    [11] [11] Lee Cheng-Chung。Tang Chien-Jen, Wu Jean-Yee.Rugate filter made with composite thin films by ion-beam sputtering[J].Applied Optics (S1559-128X), 2006, 45(7): 1333-1337.

    [12] [12] XU Zunping, YAN Dongxu, XIAO Dingquan, et al.Temperature field and residual stress analysis of multilayer pyroelectric thin film[J].Ceramics International(S0272-8842), 2012, 38(2): 981-985.

    [13] [13] Cetinorgü E, Baloukas B, Zabeida O, et al.Mechanical and thermoelastic characteristics of optical thin films deposited by dual ion beam sputtering[J].Applied Optics(S1559-128X), 2009, 48(23): 4536-4544.

    [14] [14] Meagher E P, Lager G A.Polyhedral thermal expansion in the TiO, polymofphs: refinement of the crystal structures of rutile and brookite at high temperature[J].Canadian Mineralogist(S0008-4476), 1979, 17(1): 77-85.

    [15] [15] Tsui Y C, Clyne T W.An analytical model for predicting residual stresses in progressively deposited coatings Part 1: Planar geometry[J].Thin Solid Films(S0040-6090), 1997, 306(1): 23-33.

    [16] [16] Paul B Mirkatimi.Stress, reflectance, and temporal stability of sputter-deposited Mo/Si and Mo/Be multilayer films for extreme ultraviolet lithography[J].Opt.Eng(S0091-3286), 1999, 38(7): 246-259.

    [17] [17] Haider J, Rahman M, Corcoran B, et al.Simulation of thermal stress in magnetron sputtered thin coating by finite element analysis[J].Journal of Materials Processing Technology(S0924-0136), 2005, 168(1): 36-41.

    [18] [18] Crooks D R M, Cagnoli G, Fejer M M, et al.Experimental measurements of mechanical dissipation associated with dielectric coatings formed using SiO2, Ta2O5 and Al2O3[J].Classical and Quantum Gravity(S0264-9381), 2006, 23(15): 4953-4965.

    [19] [19] Chen Tei-Chen, LIN Wenjong, CHEN Daolong.Effect of temperature gradient on simultaneously experimental determination of thermal expansion coefficients and elastic modulus of thin film materials[J].Journal of Applied Physics(S0021-8979), 2004, 96(7): 3800-3806.

    [20] [20] http://www.azom.com/article.aspx ArticleID=1179.

    [21] [21] LIU Hongbing, TAO Jie, Yoann Gautreau, et al.Simulation of thermal stresses in SiC–Al2O3 composite tritium penetration barrier by finite-element analysis[J].Mater & Des(S0261-3069), 2009, 30(8): 2785–2790.

    CLP Journals

    [1] YANG Li-bao, LI Yan-hong, SAN Xiao-gang, WANG Jing, SHI Guo-quan. Improvement of resonant frequency characteristics of photoelectric tracking system with new bearing structure[J]. Optics and Precision Engineering, 2017, 25(11): 2889

    Tools

    Get Citation

    Copy Citation Text

    SHANG Peng, LI Ding, AI Wanjun, XIONG Shengming. Use of the Finite Element Technique to Analyze Thermal Stress in Coating Under Thermal Loading Conditions[J]. Opto-Electronic Engineering, 2015, 42(5): 45

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Jun. 24, 2014

    Accepted: --

    Published Online: Sep. 8, 2015

    The Author Email: Peng SHANG (shangpeng163@163.com)

    DOI:10.3969/j.issn.1003-501x.2015.05.008

    Topics