[1] [1] Wood R W. Physical Optics [M]. 3rd ed. New Yk: Macmillan Co, 1934.

[2] G J Swanson, W B Veldkamp. Binary lenses for use at 10.6 micrometers. Optical Engineering, 24, 791-795(1985).

[3] G J Swanson, W B Veldkamp. Diffractive optical elements for use in infrared systems. Optical Engineering, 28, 605-608(1989).

[4] C Q Xie. Research progress on complete fabrication technology of diffractive optical elements. Optics and Precision Engineering, 30, 1815-1827(2022).

[5] Y Q Shang, H Qi, Y L Ma, et al. Study on sapphire microstructure processing technology based on wet etching. International Journal of Modern Physics B, 31, 1741004(2017).

[6] X Q Liu, B F Bai, Q D Chen, et al. Etching-assisted femto-second laser modification of hard materials. Opto-Electronic Advances, 2, 09190021(2019).

[7] J L Chen, X Z Lu, Q L Wen, et al. Review on laser-induced etching processing technology for transparent hard and brittle materials. International Journal of Advanced Manufacturing Technology, 117, 2545-2564(2021).

[8] T J Suleski, D C Oshea. Gray-scale masks for diffractive-optics fabrication: I. Commercial slide imagers. Applied Optics, 34, 7507-7517(1995).

[9] [9] Pawlowski E. Thin film deposition: an alternative technique f the fabrication of binary opticswith high efficiency[C]4th International Conference on Holographic Systems, Components Applications, 1993: 5459.

[10] M Karlsson, F Nikolajeff. Fabrication and evaluation of a diamond diffractive fan-out element for high power lasers. Optics Express, 11, 191-198(2003).

[11] C G Blough, M Rossi, S K Mack, et al. Single-point diamond turning and replication of visible and near-infrared diffractive optical elements. Applied Optics, 36, 4648-4654(1997).

[12] [12] Davies M A, Evans C J, Vohra R R, et al. Application of precision diamond machining to the manufacture of microphotonics components[C]Lithographic micromachining techniques f optical component fabrication II, 2003: 94108.

[13] [13] Jin G F, Yan Y B, X W M. Binary Optics[M]. Beijing: National Defense Industry Press, 1998. (in Chinese)

[14] Y X Li. New method for mass replication of diffractive optical elements. Yunguang Technology, 36, 33-37(2004).

[15] K M Tsai. Effect of injection molding process parameters on optical properties of lenses. Applied Optics, 49, 6149-6159(2010).

[16] X S Jia, Y Q Chen, L Liu, et al. Combined pulse laser: Reliable tool for high-quality, high-efficiency material processing. Optics & Laser Technology, 153, 108209(2022).

[17] [17] Qiao W, Pu D, Chen L S. Nanofabrication toward highresolution large area[C]2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS), 2021: 4246.

[18] [18] Ai J. Study on key technologies of highefficiency laser direct writing lithography on curved surfaces [D]. Wuhan: Huazhong University of Science & Technology, 2018. (in Chinese)

[19] M T Gale, M Rossi, H Schütz, et al. Continuous-relief diffractive optical elements for two-dimensional array generation. Applied Optics, 32, 2526-2533(1993).

[20] M T Gale, M Rossi, J Pedersen, et al. Fabrication of continuous-relief micro-optical elements by direct laser writing in photoresists. Optical Engineering, 33, 3556-3566(1994).

[21] D S Hou, C L Du, C K Qiu, et al. Model ISI-2802 laser direct write system and its applications. Opto-Electronic Engineering, 26-30(1997).

[22] M R Wang, H Su. Laser direct-write gray-level mask and one-step etching for diffractive microlens fabrication. Applied Optics, 37, 7568-7576(1998).

[23] J R Salgueiro, J F Roman, V M Cuevas. System for laser writing to lithograph masks for integrated optics. Optical Engineering, 37, 1115-1123(1998).

[24] A Y Smuk, N M Lawandy. Direct laser writing of diffractive optics in glass. Optics Letters, 22, 1030-1032(1997).

[25] J H Burge, D S Anderson, T D Milster, et al. Measurement of a convex secondary mirror using a holographic test plate. Advanced Technology Optical Telescopes V, 193-198(1994).

[26] [26] Burge J H, Fehniger M J, Cole G C. Demonstration of accuracy flexibility of using CGH test plates f measuring aspheric surfaces[C]Optical Manufacturing Testing II, 1997: 379389.

[27] B Swa, C Mzza, B Mbla, et al. Progresses on new generation laser direct writing technique. Materials Today Nano, 16, 100142(2021).

[28] R Stoian, J P Colombier. Advances in ultrafast laser structuring of materials at the nanoscale. Nanophotonics, 9, 4665-4688(2020).

[29] S J Xu, Y Z Duan, Y H Yu, et al. Machine vision-based high-precision and robust focus detection for femtosecond laser machining. Optics Express, 29, 30952-30960(2021).

[30] J L Du, F X Li, F P Peng, et al. Large-range and high-precision autofocus method based on an annular DOE for a laser direct writing system. Optics Express, 30, 6981-6990(2022).

[31] [31] Zhu F, Zhou C, Ma J. Calibration precompensation of direct laser writing system[C]Holography, Diffractive Optics, Applications V, SPIE, 2012, 8556: 193199.

[32] [32] Häfner M, Reichle R, Pruss C, et al. Laser direct writing of diffractive structures on curved surfaces[C]DGaO Proceed ings, 2012.

[33] J Ai, Q Du, Z Qin, et al. Laser direct-writing lithography equipment system for rapid and μm-precision fabrication on curved surfaces with large sag heights. Optics Express, 26, 20965-20974(2018).

[34] Z L Wu, Y N Qi, X J Yin, et al. Polymer-based device fabri-cation and applications using direct laser writing technology. Polymers, 11, 553(2019).

[35] T Jwad, S Deng, H Butt, et al. Fabrication of TiO₂ thin film based fresnel zone plates by nanosecond laser direct writing. Journal of Micro and Nano-Manufacturing, 6, 011001(2017).

[36] [36] Li Fengyou. Study on technology laser direct writing[D]. Changchun: Changchun Institute of Optics, Fine Mechanics Physics, Chinese Academy of Sciences, 2002. (in Chinese)

[37] K S Lee, H K Ran, D Y Yang, et al. Advances in 3D nano/microfabrication using two-photon initiated polymeri-zation. Progress in Polymer Science, 33, 631-681(2008).

[38] Y Q Liu, H B Sun. Progress and application of nonlinear laser manufacturing (Invited). Infrared and Laser Engineering, 51, 20220005(2022).

[39] X Wang, H Yu, P Li, et al. Femtosecond laser-based processing methods and their applications in optical device manufacturing: A review. Optics & Laser Technology, 135, 106687(2021).

[40] S Gao, Z H Wang, J G Hua, et al. Sub-diffraction-limit fabrication of sapphire by femtosecond laser direct writing. Acta Physica Sinica, 66, 147901(2017).

[41] P Y Liu, Z X Liu, Y Y Cao, et al. Microfiber long-period grating based on two-photon polymerization technology. Laser & Optoelectronics Progress, 58, 2306006(2021).

[42] R R Wang, W C Zhang, F Jin, et al. Fabrication of polyaniline microstructure via two-photon polymerization. Chinese Journal of Lasers, 48, 0202006(2021).

[43] C R Liao, B Z Li, M Q Zou, et al. Optical fiber integrated micro/nano-structured device fabricated by femtosecond laser induced two-photon polymerization and its applications. Laser & Optoelectronics Progress, 58, 1306005(2021).

[44] Y H Su, T T Qin, B Xu, et al. Patterned microlens processed using two-photon polymerization of femtosecond laser and its imaging test. Optics and Precision Engineering, 28, 2629-2635(2020).

[45] [45] Jiang T. The fabrication perfmance acterization of microoptical components based on femtosecond laser direct writing[D]. Changchun: Jilin Univerity, 2014. (in Chinese)

[46] W Ma, P Zhang, W Zhou, et al. Femtosecond-laser direct-writing volume phase gratings inside Ge–As–S chalcogenide glass. Ceramics International, 46, 17599-17605(2020).

[47] Z N Tian, X W Cao, W G Yao, et al. Hybrid refractive-diffractive optical vortex microlens. IEEE Photonics Technology Letters, 28, 2299-2302(2016).

[48] X Q Liu, R Cheng, J X Zheng, et al. Wear-resistant blazed gratings fabricated by etching-assisted femtosecond laser lithography. Journal of Lightwave Technology, 39, 4690-4694(2021).

[49] M Mizoshiri, S Arakane, J Sakurai, et al. Direct writing of Cu-based micro-temperature detectors using femtosecond laser reduction of CuO nanoparticles. Applied Physics Express, 9, 036701(2016).

[50] H Zhang, M Tang, J McCoy, et al. Deposition of tungsten nanogratings induced by a single femtosecond laser beam. Optics Express, 15, 5937-5947(2007).

[51] [51] Jiang J. Study of diffraction optical element fabricated by polar codinate femtosecond laser direct writing on curved surface[D]. Changchun: Jilin University, 2017. (in Chinese)

[52] H Wang, S Liu, Y L Zhang, et al. Controllable assembly of silver nanoparticles induced by femtosecond laser direct writing. Science and Technology of Advanced Materials, 16, 024805(2015).

[53] Y C Ma, L Wang, K M Guan, et al. Silicon-based suspended structure fabricated by femtosecond laser direct writing and wet etching. IEEE Photonics Technology Letters, 28, 1605-1608(2016).

[54] Y H Yu, Z N Tian, T Jiang, et al. Fabrication of large-scale multilevel phase-type Fresnel zone plate arrays by femtosecond laser direct writing. Optics Communications, 362, 69-72(2016).

[55] B Xu, G J Wei, L S Chen. Research advances in technology of laser direct writing. Optoelectronic Technology & Information, 17, 1-5(2004).

[56] J Jiang, J Q Liu, Y Xu, et al. Laser direct writing technique of diffraction optical element on curved-surface substrate. Chinese Journal of Lasers, 44, 0602002(2017).

[57] M J Low, H Lee, C H J Lim, et al. Laser-induced reduced-graphene-oxide micro-optics patterned by femtosecond laser direct writing. Applied Surface Science, 526, 146647(2020).

[58] J G Hua, Z Y Hu, S J Xu, et al. Centimeter-sized aplanatic hybrid diffractive-refractive lens. IEEE Photonics Tech-nology Letters, 31, 3-6(2018).

[59] D Sola, S Alamri, A Lasagni, et al. Fabrication and characterization of diffraction gratings in ophthalmic polymers by using UV direct laser interference patterning. Applied Surface Science, 476, 128-135(2019).

[60] A Poleshchuk, R Sametov, A Sedukhin. Multibeam laser writing of diffractive optical elements. Optoelectronics, Instrumentation and Data Processing, 48, 327-333(2012).

[61] R Winfield, B Bhuian, S O’Brien, et al. Fabrication of grating structures by simultaneous multi-spot fs laser writing. Applied Surface Science, 253, 8086-8090(2007).

[62] C Arnoux, L A Pérez-Covarrubias, A Khaldi, et al. Under-standing and overcoming proximity effects in multi-spot two-photon direct laser writing. Additive Manufacturing, 49, 102491(2022).

[63] L Q Zhou, L W Zhu, Q Shi. Grating parallel fabrication based on the multifocal spots. Journal of Ludong University (Natural Science Edition), 37, 320-325(2021).

[64] J L Du, R Y Shi, Z Cui, et al. Proximity effects during mask fabrication. Micronanoelectronic Technology, 36-40(2002).

[65] S Y Liu, J Y Zhang. Principles and applications of ultrafast laser processing based on spatial light modulators. Laser & Optoelectronics Progress, 57, 111431(2020).

[66] C Zhang, Y Hu, W Du, et al. Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels. Scientific reports, 6, 1-9(2016).

[67] D Yang, L Liu, Q Gong, et al. Rapid two-photon polymerization of an arbitrary 3D microstructure with 3D focal field engineering. Macromolecular Rapid Communica-tions, 40, 1900041(2019).

[68] [68] Yan G B. The development of multifunction digital holographic laser interference direct writing system[D]. Qingdao: Ocean University of China, 2015. (in Chinese)

[69] K Zhou, D J Li, Y F Wang, et al. Target detection performance of infrared spectrum with diffractive optical system. Infrared and Laser Engineering, 50, 20200371(2021).

[70] H Huang, T Zhai, Q Song, et al. Wide angle 2D beam splitter design based on vector diffraction theory. Optics Com-munications, 434, 28-35(2019).

[71] [71] Lin Y. Design of diffractive optical elements f laser beam shaping[D]. Dalian: Dalian University of Technology, 2009. (in Chinese)

[72] H T Yang, X F Yang, C Mei, et al. Design of hybrid refractive-diffractive infrared dual-band zoom optical system. Infrared and Laser Engineering, 49, 20200036(2020).

[73] J Y Zhu, Y J Xie. Large aperture lidar receiver optical system based on diffractive primary lens. Infrared and Laser Engineering, 46, 0518001(2017).

[74] W D Qu, H R Gu, Q F Tan, et al. Precise design of two-dimensional diffractive optical elements for beam shaping. Applied Optics, 54, 6521-6525(2015).

[75] [75] Zhang W. Design applications of large aperture diffractive optical elements in "Shen Guang" device[D]. Hefei: University of Science & Technology of China, 2007. (in Chinese)

[76] F Q Zhang, X Fan, B Zhu, et al. Athermal design of long-wave infrared optical system with hybrid refractive/diffractive. Infrared and Laser Engineering, 44, 1158-1163(2015).

[77] R Q Liu, X M Chen, J Q Zhao. Applied research of diffractive optical elements in IR imaging systems. Infrared Technology, 31, 327-330(2009).

[78] [78] Cheng X M. The design fabrication testing of diffractive element in the infrared optical lens[D]. Chengdu: Institute of Optics Electrics, Chinese Academy of Sciences, 2015. (in Chinese)

[79] [79] Ma T. Design they of multilayer diffractive optical element Iits application in hybrid optical system[D]. Hangzhou: Zhejiang University, 2006. (in Chinese)

[80] [80] Swanson G J, Veldkamp W B. Infrared applications of diffractive optical elements[C]Holographic optics: Design Applications, 1988: 155162.

[81] T Stone, N George. Hybrid diffractive-refractive lenses and achromats. Applied Optics, 27, 2960-2971(1988).

[82] D A Buralli, G M Morris, J R Rogers. Optical performance of holographic kinoforms. Applied Optics, 28, 976-983(1989).

[83] [83] Soskind Y. Diffractive optics technologies in infrared systems[C]Infrared Technology Applications XLI, 2015: 465472.

[84] X Zhao, Y Guo, P Zhang, et al. Design of infrared dual-band optical system with double-layer diffraction optical element. Electronics Optics & Control, 24, 85-89(2017).

[85] B Zhang, Q F Cui, M X Piao, et al. Design of dual-band infrared zoom lens with multilayer diffractive optical elements. Applied Optics, 58, 2058-2067(2019).

[86] H Zhang, H Liu, W B Xu, et al. Large aperture diffractive optical telescope: A review. Optics & Laser Technology, 130, 106356(2020).

[87] B Feng, M Yang. Athermalization design for infrared dual-band double-layer harmonic diffractive optical system. Optik-International Journal for Light and Electron Optics, 227, 166097(2021).

[88] M Z Li, X Hou, W C Zhao, et al. Current situation and development trend of aspheric optical surface defect detection technology (invited). Infrared and Laser Engineering, 51, 20220457(2022).

[89] H Liu, Z Lu, F Li. Using diffractive optical element and Zygo interferometer to test large-aperture convex surface. Optics & Laser Technology, 37, 642-646(2005).

[90] K Myller, M Juuti, K-E Peiponen, et al. Quality inspection of metal surfaces by diffractive optical element-based glossmeter. Precision Engineering, 30, 443-447(2006).

[91] V Rastogi, S Agarwal, V Kumar, et al. Holographic optical element based digital holographic interferometer for the study of macro flames, micro flames and their temperature instability. Optics and Lasers in Engineering, 122, 29-36(2019).

[92] D L Shealy, J A Hoffnagle. Laser beam shaping profiles and propagation. Applied Optics, 45, 5118-5131(2006).

[93] [93] Shealy D L. Histical perspective of laser beam shaping[C]Laser Beam Shaping III, 2002: 2847.

[94] Y Lin, J S Hu. Laser beam shaping techniques. Laser Journal, 29, 1-4(2008).

[95] G Račiukaitis, E Stankevičius, P Gečys, et al. Laser processing by using diffractive optical laser beam shaping technique. Journal of Laser Micro/Nanoengineering, 6, 37-43(2011).

[96] P A Hilton, D Lloyd, J R Tyrer. Use of a diffractive optic for high power laser cutting. Journal of Laser Applications, 28, 012014(2016).

[97] S Kang, J Shin. Laser beam oscillation welding of aluminum alloy using the spatially modulated beam by diffractive optical element (DOE). Journal of Manufacturing Processes, 66, 387-396(2021).

[98] S Katz, N Kaplan, I Grossinger. Using diffractive optical elements: DOEs for beam shaping–fundamentals and applications. Optik & Photonik, 13, 83-86(2018).

[99] X J Yang, Z Q Wang, R L Fu. Hybrid diffractive-refractive 67-diagonal field of view optical see-through head-mounted display. Optik, 116, 351-355(2005).

[100] [100] Yang L L. Studies on diffraction efficiency of multilayer diffractive optical elements[D]. Changchun: Changchun University of Science Technology, 2010. (in Chinese)

[101] L Mi, C P Chen, Y Lu, et al. Design of lensless retinal scanning display with diffractive optical element. Optics Express, 27, 20493-20507(2019).

[102] J Hua, D Yi, W Qiao, et al. Multiview holographic 3D display based on blazed fresnel DOE. Optics Communications, 472, 125829(2020).

[103] H Xie, F R Huo, C X Xue. Optimal design and analysis of a new coupled grating structure for head-mounted display. Acta Optica Sinica, 42, 1405001(2022).