[1] [1] XU Q Y，LIU ZH T，LI Y P， et al.. Design and preparation of sub-wavelength antireflective structures on ZnS［J］. Acta Phys.Sin.,2011,60(1):014103-1-014103-4. (in Chinese)

[2] [2] YU W X，LU ZH W，WANG P，et al.. Comparison of periodic subwavelength structure and multilayer antireflection coatings［J］. Opt. Precision Eng.,2001,9(1):10-13. (in Chinese)

[3] [3] LALANNE P, MORRIS G M. Antireflection behavior of silicon subwavelength periodic structures for visible light ［J］. Nanotechnology，1997, 8: 53-56.

[4] [4] GUO L J. Recent progress in nanoimprint technology and its applications ［J］. Journal of Physics D: Applied Physics,2004, 37(11): R123-R141.

[5] [5] GUO L J. Nanoimprint lithography: methods and material requirements［J］. Advanced Materials,2007,19(4):495-513.

[6] [6] ZHAO J L，WANG H Q，FENG X G，et al.. Uniformity of photoresist coated on concave sphere ［J］.Journal of Applied Optics,2009,30(1):101-104. (in Chinese)

[7] [7] FU Y Q，ZHAO J L. Analysis of effect on uniformity of photoresist layer in spin coating［J］.Opt. Precision Eng.,1996,4(2):94-97. (in Chinese)

[8] [8] LIU X H，FENG X G，ZHAO J L. Process of spherical photoresist spin coating［J］.Opt. Precision Eng.,2011,19(8):1810-1815. (in Chinese)

[9] [9] LI Q L，WANG W M，ZHAO X D，et al.. Gelatinizing research based on the ITO glass ［J］.Electronics Process Technology,2010,31(4):237-240. (in Chinese)

[10] [10] HONG SH J，SHEN Y. Study of photo-resist coating technology to achieve optimized film thickness［J］. Advanced Display,2005,57:44-46. (in Chinese)

[11] [11] WHITE. SPIN-COATING PROCEDURE,US:47419 26［P］. 1998.

[12] [12] HWANG J H, MA F. On the flow of a thin liquid film over a rough rotating disk ［J］. Journal of Applied Physics,1988, 66(1): 388-394.

[13] [13] PEURRUNG L M, GRAVES D B. Film thickness profiles over topography in spin coating［J］. The Electrochemical Society, 1991, 138(7):2115-2124.

[14] [14] CHEN H B，LI Y P，WANG N，et al.. Fabrication of ultraviolet-nanoimprint mold of 2-dimensional sub-wavelength structured surface on quartz substrate ［J］. Chinese Journal of Vacuum Science and Technology,2013,33(2):176-180. (in Chinese)

[15] [15] HIROSHIMA H, ATOBE H, WANG Q. Viscosity of a thin film of UV curable resin in pentafluoropane ［J］. Journal of Photolymer Science and Technology,2010, 23(1): 45-50.

[16] [16] HIROSHIMA H, KOMURO M. Control of bubble defects in UV nanoimprint［J］. Japanese Journal of Applied Physics, 2007, 46(9B):6391-6394.

[17] [17] LEE H. Effect of imprinting pressure on residual layer thickness in ultraviolet nanoimprint lithography ［J］. Journal of Vacuum Science & Technology B, 2005, 23(3): 1102-1106.

[18] [18] ZHANG SH F，LIU ZH T，LI Y P，et al.. Preparation and characterization of nanoimprint template on quartz by reactive ion etching［J］.Mechanical Science and Technology for Aerospace Engineering,2012,31(11):1786-1789. (in Chinese)

[19] [19] ZHOU W M，ZHANG J，LIU Y B，et al. Nano-Imprint Technology［M］. Beijing: Science Press,2012. (in Chinese)

[20] [20] XIANG D，HE L M，QU D G，et al.. Development of coating of photoresist in semiconductor manufacturing［J］. China Mechanical Engineering, 2012,23(3):355-361. (in Chinese)

[21] [21] YONEDA I, NAKAGAWA Y, MIKAMI S, et al.. A study of filling process for UV nanoimprint lithography using a fluid simulation ［J］. Alternative Lithographic Technologies, 2009, 7271：72712A-1-72712A-7.