[1] [1] ZHAO W X, ZHANG G. Study on sintering process of ultra-large-scale lightweight SiC mirror blank［J］. Bulletin of the Chinese Ceramic Society, 2014, 33(11): 2838-2842. (in Chinese)

[2] [2] ZHANG X J, LI ZH L, ZHANG ZH Y. Space telecope aspherical mirror structure design based on SiC material［J］. Infrared and Laser Engineering, 2007, 36(5): 577-582. (in Chinese)

[3] [3] SEIN E, TOULEMONT Y, SAFA F, et al.. A φ3.5m diameter SiC telescope for Herschel mission［J］. SPIE, 2003, 4850: 606-618.

[4] [4] ZHANG G, ZHAO W X, ZHAO R C, et al.. Fabricating large-scale mirrors using reaction-bonded silicon carbide［EB/OL］. SPIE Newsroom,http: //spie.org/newsroom/6582-fabricating-large-scale-mirrors-using-reaction-bonded-silicon-carbide ArticleID=x119942 & highlight=x2422.(2016-08-09).

[5] [5] LAN B, WU X X, LI J F, et al.. Influence of axial-force errors on the deformation of the 4 m lightweight mirror and its correction［J］. Applied Optics, 2017, 56(3): 611-619.

[6] [6] WU X X, LI J F, SONG S M, et al.. Active support system for 4 m SiC lightweight primary mirror［J］. Opt. Precision Eng., 2014, 22(9): 2451-2457. (in Chinese)

[7] [7] LI J F, WU X X, SHAO L. Study on active support for large SiC primary mirror and force actuator design［J］. Infrared and Laser Engineering, 2016, 45(7): 0718003. (in Chinese)

[8] [8] LIU ZH Y, LI L X, ZENG X F, et al.. Fabrication of large aspheric mirror using multi-mode polishing based on error separation［J］. Opt. Precision Eng., 2017, 25(4): 813-819. (in Chinese)

[9] [9] XU H, GUAN Y J. Structural design of 1 m diameter space mirror component of space camera［J］. Opt. Precision Eng., 2013, 21(6): 1488-1495. (in Chinese)

[10] [10] HU H F, LUO X, XIN H W, et al.. Layout optimization of equal-force supports for ultra-large optical fabrication［J］. Acta Optica Sinica, 2014, 34(4): 0422003. (in Chinese)

[11] [11] HU H F, LUO X, QI E H, et al.. System integration and control of the hydrostatic supports for manufacturing ultra-large optics［J］. Acta Optica Sinica, 2015, 35(8): 0822001. (in Chinese)

[12] [12] LI J F. Research and design of cylinder used as the primary mirror support of telescope［J］. Journal of Changchun University of Science and Technology: Natural Science Edition, 2014, 37(3): 32-37. (in Chinese)

[13] [13] XIONG L, LUO X, LIU Z Y, et al.. Swing arm profilometer: analytical solutions of misalignment errors for testing axisymmetric optics［J］. Optical Engineering, 2016, 55(7): 074108.