[1] [1] SUHARA T,TAKEI T,TAKIGUTI M.Characteristics of friction force on piston pin boss bearings[J].JSAE Review,1996,17(4):453-453.

[2] [2] WENG J Y,WENG SH Y.Machining principle and equipment of non-cylinder pin hole of piston[J].Shanghai Machine Tool,1998(1):22-24.(in Chinese)

[3] [3] HU D J,LIU R M,XU L M,et al..Research and development of full automatic CNC special machine for boring piston pin hole[J].Modular Machine Tool and Automatic Manufacturing Technique,1999(1):27-30.(in Chinese)

[4] [4] XU L M,HU D J,ZHANG L.Development of a automatic CNC machine’s control system for boring piston pin hole[J].Modular Machine Tool and Automatic Manufacturing Technique,1999(8):33-35.(in Chinese)

[5] [5] ZHAI P,ZHANG CH R,WANG H T,et al..Research on machining principle for non-cylinder piston pin hole based on GMM[J].Piezoelectric & Acoustooptics,2007,29(1):125-128.(in Chinese)

[6] [6] ZHANG K,HU D J,MA H Q.Research on boring mechanism for piston noncircular pin hole[J].Modular Machine Tool and Automatic Manufacturing Technique,2003(8):4-8.(in Chinese)

[7] [7] GONG D CH,LU F Z ,PAN X H,et al..Precision tracking and experimental optimization of GMA by preisach inverse compensation[J].Opt.Precision Eng.,2007,15(8):1241-1246.(in Chinese)

[8] [8] GONG D CH,LU F Z ,PAN X H ,et al..Precision tracking and experimental optimization of GMA by preisach inverse compensation[J].Opt.Precision Eng.,2007,15(10):1589-1594.(in Chinese)

[9] [9] WANG Y Y,ZHAO X Z.Inverse control algorithm to compensate the hysteresis and creep effect of piezoceramic[J].Opt.Precision Eng.,2006,14(6):1032-1040.(in Chinese)

[10] [10] MAJIMA S,KODAMA K,HASEGAWA T. Modeling of shape memory actuator and tracking control system with the model[J].IEEE Trans on Control Systems Technology,2001,9(1):54-59.

[11] [11] LHEE C G,PARK J S,AHN H S,et al..Sliding mode like logic control with self-tuning the dead zone parametres[J].IEEE Trans on Fuzzy Systems,2001,9(2):343-347.

[12] [12] KURDILA A J,WEBB G.Compensation for distributed hystereis operators in active structured systems[J].Journal of Guidance,Control and Dynamics,1997,20(6):1125-1132.

[13] [13] GE P,JOUANEH M.Generalized preisach model for hysteresis nonlinearity of piezoceramic actuators[J].Precision Engineering,1997,20(2):99-111.

[14] [14] MITTAL S,MEAQ CH.Hysteresis compensation in electromagnetic actuator through preisach model inversion[J].IEEE/ASME Trans on Mechatronics,2000,5(4):394-409.

[15] [15] HWANG C L,JAN CH,CHEN Y H.Piezomechanic using intelligent variable-structure control [J].IEEE Trans on Industrial Electronic,2001,48(1):47-59.

[16] [16] WANG X J, WANG X S.Inverse compensation control for giant magnetostrictive actuator[J].China Mechanical Engineering,2007,18(10):1151-1156.(in Chinese)

[17] [17] MAYERGOYZ D .Dynamic preisach models of hysteresis[J].IEEE Trans on Magetics,1988,24(6):2929-2927.

[18] [18] YU Y H,XIAO Z C,NAGI G,et al..Dynamic preisach modeling of hysteresis of the piezoceramic actuator system[J].Mechanism and Machine Theory,2002(37):75-89.

[19] [19] MILLER W T,HEWES R P,GLANZ F H,et al..Real-time dynamic control of an industry manipulator using a neural network based learing controller[J].IEEE Trans.On Robotics and Automation,1990,6(1):1-9.

[20] [20] CRUZ HERNONDEZ J M,HAYWARD V.Phase control approach to hysteresis reduction[J].IEEE Trans.Contr.Syst.Technol.,2001,9(1):17-26.

[21] [21] CAVALLO A,NATALE C,PIROZZI S,et al..Feedback control systems for micropositioning tasks with Hysteresis compensation[J].IEEE Trans.Magn.,2004,40(2):876-879