Optics and Precision Engineering, Volume. 31, Issue 1, 1(2023)
Architecture and key technology of autonomous controllable programmable control system
[1] [1] 1周莉, 焦洋. PLC控制技术研究综述[J]. 硅谷, 2010, 3(16): 12.ZHOUL, JIAOY. Overview of PLC control technology research[J]. Silicon Valley, 2010, 3(16): 12.(in Chinese)
[2] [2] 2白素琴, 史金龙, 钱强, 等. 采用可编程逻辑控制器的大型物体三维扫描重建[J]. 光学 精密工程, 2017, 25(4): 512-518. doi: 10.3788/ope.20172504.1044BAIS Q, SHIJ L, QIANQ, et al. 3D scanning and reconstruction of large objects based on PLC[J]. Opt. Precision Eng., 2017, 25(4): 512-518.(in Chinese). doi: 10.3788/ope.20172504.1044
[3] [3] 3饶志波. 国产PLC发展任重道远[J]. 自动化博览, 2020, 37(4): 22-23. doi: 10.3969/j.issn.1003-0492.2020.04.007RAOZH B. Domestic PLC development has a long way to go[J]. Automation Panorama, 2020, 37(4): 22-23.(in Chinese). doi: 10.3969/j.issn.1003-0492.2020.04.007
[4] [4] 4黄征宇. 实时以太网总线式控制系统的同步与安全设计问题研究[D]. 长沙: 国防科技大学, 2019. doi: 10.1109/access.2019.2926650HUANGZH Y. Research on Synchronization and Safe Design for Real-time Ethernet Bus Control System[D]. Changsha: National University of Defense Technology, 2019. (in Chinese). doi: 10.1109/access.2019.2926650
[5] [5] 5李姗姗, 董威, 罗宇, 等. 国产操作系统研发对系统能力培养的需求与实践[J]. 计算机工程与科学, 2018, 40(S1): 32-36.LISH SH, DONGW, LUOY, et al. Requirements on engineering ability cultivation during the development of domestic operating system and our practice[J]. Computer Engineering & Science, 2018, 40(S1): 32-36.(in Chinese)
[6] [6] 6陈天航, 唐小琦, 宋宝, 等. 数控系统现场总线精确时钟同步技术[J]. 组合机床与自动化加工技术, 2011(4): 55-59. doi: 10.3969/j.issn.1001-2265.2011.04.014CHENT H, TANGX Q, SONGB, et al. NC fieldbus precise time synchronization technology[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2011(4): 55-59.(in Chinese). doi: 10.3969/j.issn.1001-2265.2011.04.014
[7] [7] 7陈宁, 郑杰基, 焦西凯, 等. 超声电机多参量高精度测控系统的研制[J]. 光学 精密工程, 2020, 28(4): 759-770. doi: 10.3788/OPE.20202804.0759CHENN, ZHENGJ J, JIAOX K, et al. Development of high-precision multivariable measurement and control system of ultrasonic motor[J]. Opt. Precision Eng., 2020, 28(4): 759-770.(in Chinese). doi: 10.3788/OPE.20202804.0759
[8] M CEREIA, I C BERTOLOTTI, S SCANZIO. Performance of a real-time EtherCAT master under linux. IEEE Transactions on Industrial Informatics, 7, 679-687(2011).
[9] [9] 9黄礼超, 巫茜. 基于OPC的工控系统软件集成[J]. 重庆理工大学学报(自然科学), 2012, 26(3): 109-113.HUANGL CH, WUQ. Software integration of industrial control system based on OPC[J]. Journal of Chongqing University of Technology (Natural Science), 2012, 26(3): 109-113.(in Chinese)
[10] M JAMRO. POU-oriented unit testing of IEC 61131-3 control software. IEEE Transactions on Industrial Informatics, 11, 1119-1129(2015).
[11] R SCHLESINGER, A SPRINGER, T SAUTER. New approach for improvements and comparison of high performance real-time Ethernet networks, 1-4(2015).
[12] [12] 12朱予辰, 冯冬芹, 褚健. 基于EPA的块数据流通信调度与控制[J]. 浙江大学学报(工学版), 2012, 46(11): 2097-2102, 2115.ZHUY CH, FENGD Q, CHUJ. EPA based communication scheduling algorithm and control scheme for block stream[J]. Journal of Zhejiang University (Engineering Science), 2012, 46(11): 2097-2102, 2115.(in Chinese)
[13] [13] 13刘慧双, 宋宝, 周向东, 等. 嵌入式数控系统NCUC-Bus现场总线设备驱动研究与开发[J]. 组合机床与自动化加工技术, 2012(8): 62-65, 69. doi: 10.3969/j.issn.1001-2265.2012.08.016LIUH SH, SONGB, ZHOUX D, et al. Research and development of NCUC-bus fieldbus device driver on embedded CNC system[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2012(8): 62-65, 69.(in Chinese). doi: 10.3969/j.issn.1001-2265.2012.08.016
[14] [14] 14张金泽. 基于CANopen的EtherMAC实时以太网应用层及网关研究[D]. 济南: 山东大学, 2012.ZHANGJ Z. Research on Application Layer and Gateway of the Ethermac Real-time Ethernet Based on CANopen[D]. Jinan: Shandong University, 2012. (in Chinese)
[15] [15] 15徐昌荣. 对国产PLC产业化的几点思考[J]. 自动化博览, 2005(3): 18-20, 24. doi: 10.3969/j.issn.1003-0492.2005.03.009XUCH R. Some ideas about the industrialization of domestic PLC products[J]. Automation Panorama, 2005(3): 18-20, 24.(in Chinese). doi: 10.3969/j.issn.1003-0492.2005.03.009
[16] [16] 16卢川, 巩潇, 周峰. 工业控制系统历史沿革及发展方向[J]. 中国工业评论, 2015(10): 40-47.LUCH, GONGX, ZHOUF. Historical evolution and development direction of industrial control system[J]. China Industry Review, 2015(10): 40-47.(in Chinese)
[17] [17] 17王劲松, 孟海斌. 简述PLC DCS FCS三大控制系统[J]. 控制工程, 2006, 13(S2): 153-155, 187.WANGJ S, MENGH B. Simple introduction of PLC DCS FCS[J]. Control Engineering of China, 2006, 13(S2): 153-155, 187.(in Chinese)
[18] Q WU, L Z YANG, J H CHEN. Enhancement for real-time Ethernet clock synchronization by internal processing delay measurement. IEEE Communications Letters, 23, 2063-2067(2019).
[19] V T BUI, C R DOW, Y C HUANG et al. A canopen-based gateway and energy monitoring system for electric bicycles. Energies, 13, 3766(2020).
[20] I KIM, S PARK, M SUNG et al. Design and implementation of a real-time motion controller using open source software. Journal of KIISE: Computer Systems and Theory, 39, 84-95(2012).
[21] D SOLIMAN, G FREY. Verification and validation of safety applications based on PLCopen safety function blocks. Control Engineering Practice, 19, 929-946(2011).
[22] S GRÜNER, J PFROMMER, F PALM. RESTful industrial communication with OPC UA. IEEE Transactions on Industrial Informatics, 12, 1832-1841(2016).
[23] L Y CHEN, D P FAN, J J ZHENG et al. Functional safety analysis and design of sensors in robot joint drive system. Machines, 10, 360(2022).
[24] [24] 24芮雪, 王亮亮, 杨琴. 国产处理器研究与发展现状综述[J]. 现代计算机(专业版), 2014(8): 15-19.RUIX, WANGL L, YANGQ. Research and present situation of the domestic CPU[J]. Modern Computer, 2014(8): 15-19.(in Chinese)
[25] R EXEL, T BIGLER, T SAUTER. Asymmetry mitigation in IEEE 802.3 Ethernet for high-accuracy clock synchronization. IEEE Transactions on Instrumentation and Measurement, 63, 729-736(2014).
[26] [26] 26张凯, 杨涛. 基于IEC61131-3标准的软PLC开发系统的研究与实现[J]. 制造业自动化, 2018, 40(11): 123-126. doi: 10.3969/j.issn.1009-0134.2018.11.030ZHANGK, YANGT. Research and implementation of soft PLC development system based on IEC61131-3 standard[J]. Manufacturing Automation, 2018, 40(11): 123-126.(in Chinese). doi: 10.3969/j.issn.1009-0134.2018.11.030
[27] J N PIRES. Semi-autonomous manufacturing systems: the role of the human-machine interface software and of the manufacturing tracking software. Mechatronics, 15, 1191-1205(2005).
[28] [28] 28王翰. 基于PLCopen规范的运动控制系统研究与实现[D]. 武汉: 华中科技大学, 2014.WANGH. Research and Implementation of Motion Control System Based on PLCopen Standard[D]. Wuhan: Huazhong University of Science and Technology, 2014. (in Chinese)
[29] J GARRIDO, D SANTOS, J SÁEZ et al. Information model to support PLCOpen Motion Control programming from Mechanical Design. Procedia Manufacturing, 51, 258-265(2020).
[30] [30] 30祁超, 谢馨, 陈凌宇, 等. 精密转台S曲线轨迹规划及高精度控制[J]. 光学 精密工程, 2018, 26(12): 2971-2981. doi: 10.3788/ope.20182612.2971QICH, XIEX, CHENL Y, et al. S-curve trajectory planning and high-precision control of precision servo turntable[J]. Opt. Precision Eng., 2018, 26(12): 2971-2981.(in Chinese). doi: 10.3788/ope.20182612.2971
Get Citation
Copy Citation Text
Dapeng FAN, Lingyu CHEN, Xiaoyu WANG, Jichun WU. Architecture and key technology of autonomous controllable programmable control system[J]. Optics and Precision Engineering, 2023, 31(1): 1
Category: Independently Cotrollable Key Technology of manufacture equipment programmable control system
Received: Sep. 2, 2022
Accepted: --
Published Online: Feb. 9, 2023
The Author Email: CHEN Lingyu (chenly2587@163.com)