[1] Deirmina F, Peghini N, Al-Mangour B et al. Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing. Materials Science and Engineering A, 753, 109-121(2019).

[2] Zhu J, Zhang Z H, Xie J X. Improving strength and ductility of H13 die steel by pre-tempering treatment and its mechanism. Materials Science and Engineering A, 752, 101-114(2019).

[3] Wang Y L, Song K X, Zhang Y M. Microstructure evolution mechanism near the fracture lip of 4Cr5MoSiV1 steel during deforming at 580 ℃. Journal of Materials Research and Technology, 8, 6390-6395(2019).

[4] Krylova S E, Romashkov E V, Gladkovsky S V et al. Special aspects of thermal treatment of steel for hot forming dies production. Materials Today： Proceedings, 19, 2540-2544(2019).

[5] Lu Y, Ripplinger K, Huang X J et al. A new fatigue life model for thermally-induced cracking in H13 steel dies for die casting. Journal of Materials Processing Technology, 271, 444-454(2019).

[6] Erfanmanesh M, Shoja-Razavi R, Abdollah-Pour H et al. Friction and wear behavior of laser cladded WC-Co and Ni/WC-Co deposits at high temperature. International Journal of Refractory Metals and Hard Materials, 81, 137-148(2019).

[7] Wang Y L, Song K X, Zhang Y M et al. Microstructure evolution and fracture mechanism of H13 steel during high temperature tensile deformation. Materials Science and Engineering A, 746, 127-133(2019).

[8] Cong D L, Zhou H, Ren Z N et al. Thermal fatigue resistance of hot work die steel repaired by partial laser surface remelting and alloying process. Optics and Lasers in Engineering, 54, 55-61(2014).

[9] Zhao X L, Wang B, Sun D J et al. Effect of pre-existing VC carbides on nitriding and wear behavior of hot-work die steel. Applied Surface Science, 486, 179-186(2019).

[10] Schwingenschlögl P, Niederhofer P, Merklein M. Investigation on basic friction and wear mechanisms within hot stamping considering the influence of tool steel and hardness. Wear, 426/427, 378-389(2019).

[11] Skela B, Sedlaček M, Kafexhiu F et al. Wear behaviour and correlations to the microstructural characteristics of heat treated hot work tool steel. Wear, 426/427, 1118-1128(2019).

[12] Chander S, Chawla V. Failure of hot forging dies： an updated perspective. Materials Today： Proceedings, 4, 1147-1157(2017).

[13] Chen J F, Li X P, Xue Y P. Friction and wear properties of laser cladding Fe901 alloy coating on 45 steel surface. Chinese Journal of Lasers, 46, 0502001(2019).

[14] Yu T, Chen J, Rao X X et al. High temperature wear behaviors of laser cladded NiCrBSi coatings. Laser & Optoelectronics Progress, 56, 101601(2019).

[15] Zhou J Z, He W Y, Xu J L et al. Strengthening mechanism and wear resistance of Al2O3/Fe901 composite coating prepared by laser cladding. Acta Optica Sinica, 39, 0514001(2019).

[16] Wall M T, Pantawane M V, Joshi S et al. Laser-coated CoFeNiCrAlTi high entropy alloy onto a H13 steel die head. Surface and Coatings Technology, 387, 125473(2020).

[17] Huang L F, Sun Y N, Wang G J. Research progress of laser cladding high-entropy alloy coating. Laser & Optoelectronics Progress, 56, 240003(2019).

[18] Cao J, Lu H F, Lu J Z et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding. Chinese Journal of Lasers, 46, 0702001(2019).

[19] Wang G Y, Zhang J Z, Shu R Y et al. High temperature wear resistance and thermal fatigue behavior of Stellite-6/WC coatings produced by laser cladding with Co-coated WC powder. International Journal of Refractory Metals & Hard Materials, 81, 63-70(2019).