[3] [3] XU Y D, HE T S, MA X D, et al. The research on mechanism of C-S-H nanocrystal improving early properties of shotcrete at low temperature by thermodynamic modelling[J]. Construction and Building Materials, 2022, 325: 126738.

[8] [8] LIU Z Z, JIAO W X, SHA A M, et al. Portland cement hydration behavior at low temperatures: views from calculation and experimental study[J]. Advances in Materials Science and Engineering, 2017, 2017: 3927106.

[9] [9] FALL M, POKHAREL M. Strength development and sorptivity of tailings shotcrete under various thermal and chemical loads[J]. Canadian Journal of Civil Engineering, 2011, 38(7): 772-784.

[13] [13] XU Y D, HE T S, YANG R H, et al. New insights into the impact of inorganic salt on cement pastes mixed with alkali free liquid accelerator in low temperature[J]. Journal of Building Engineering, 2023, 70: 106419.

[15] [15] NAWAB M S, ALI T, QURESHI M Z, et al. A study on improving the performance of cement-based mortar with silica fume, metakaolin, andcoconut fibers[J]. Case Studies in Construction Materials, 2023, 19: e02480.

[16] [16] XU D S, TANG J H, HU X, et al. Influence of silica fume and thermal curing on long-term hydration, microstructure and compressive strength of ultra-high performance concrete (UHPC)[J]. Construction and Building Materials, 2023, 395: 132370.

[19] [19] BAGHERI A, ZANGANEH H, ALIZADEH H, et al. Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash[J]. Construction and Building Materials, 2013, 47: 1402-1408.

[27] [27] WANG J F, MA L W, LU L L, et al. Improving the wear resistance and chloride permeability of sulphoaluminate cement by spindle-like calcium carbonate modification[J]. Materials Today Communications, 2022, 32: 104037.

[28] [28] ZHANG G, YANG Y Z, YANG H L, et al. Calcium sulphoaluminate cement used as mineral accelerator to improve the property of Portland cement at sub-zero temperature[J]. Cement and Concrete Composites, 2020, 106: 103452.

[29] [29] XU W B, ZHANG Y L, LIU B. Influence of silica fume and low curing temperature on mechanical property of cemented paste backfill[J].Construction and Building Materials, 2020, 254: 119305.

[30] [30] RAMEZANIANPOUR A A, MOEINI M A. Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume[J]. Construction and Building Materials, 2018, 163: 611-621.

[31] [31] TRAMONTIN S M, ONGHERO L, NUNES C B, et al. Novel low-cost shrinkage-compensating admixture for ordinary Portland cement[J].Construction and Building Materials, 2020, 230: 117024.

[32] [32] GAO D Y, MENG Y, YANG L, et al. Effect of ground granulated blast furnace slag on the properties of calcium sulfoaluminate cement[J].Construction and Building Materials, 2019, 227: 116665.

[33] [33] TRAUCHESSEC R, MECHLING J M, LECOMTE A, et al. Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends[J]. Cement and Concrete Composites, 2015, 56: 106-114.