[1] [1] THOMAS M. Chloride thresholds in marine concrete［J］. Cement and Concrete Research, 1996, 26(4): 513-519.

[2] [2] MANGAT P S, GURUSAMY K. Chloride diffusion in steel fibre reinforced marine concrete［J］. Cement and Concrete Research, 1987, 17(3): 385-396.

[3] [3] APOSTOLOPOULOS C A, DEMIS S, PAPADAKIS V G. Chloride-induced corrosion of steel reinforcement-mechanical performance and pit depth analysis［J］. Construction and Building Materials, 2013, 38: 139-146.

[4] [4] CAI R, HAN T H, LIAO W Y, et al. Prediction of surface chloride concentration of marine concrete using ensemble machine learning［J］. Cement and Concrete Research, 2020, 136: 106164.

[5] [5] MEIRA G R, ANDRADE C, ALONSO C, et al. Modelling sea-salt transport and deposition in marine atmosphere zone: a tool for corrosion studies［J］. Corrosion Science, 2008, 50(9): 2724-2731.

[6] [6] CHANG H L, JIN Z Q, WANG P G, et al. Comprehensive resistance of fair-faced concrete suffering from sulfate attack under marine environments［J］. Construction and Building Materials, 2021, 277: 122312.

[7] [7] YI Y, ZHU D J, GUO S C, et al. A review on the deterioration and approaches to enhance the durability of concrete in the marine environment［J］. Cement and Concrete Composites, 2020, 113: 103695.

[8] [8] ZHOU Y, GENCTURK B, WILLAM K, et al. Carbonation-induced and chloride-induced corrosion in reinforced concrete structures［J］. Journal of Materials in Civil Engineering, 2015, 27(9): 04014245.

[9] [9] ZHU Q, JIANG L H, CHEN Y, et al. Effect of chloride salt type on chloride binding behavior of concrete［J］. Construction and Building Materials, 2012, 37: 512-517.

[10] [10] SURYAVANSHI A K, SCANTLEBURY J D, LYON S B. Corrosion of reinforcement steel embedded in high water-cement ratio concrete contaminated with chloride［J］. Cement and Concrete Composites, 1998, 20(4): 263-281.

[11] [11] BALONIS M, LOTHENBACH B, LE SAOUT G, et al. Impact of chloride on the mineralogy of hydrated Portland cement systems［J］. Cement and Concrete Research, 2010, 40(7): 1009-1022.

[12] [12] LUO R, CAI Y B, WANG C Y, et al. Study of chloride binding and diffusion in GGBS concrete［J］. Cement and Concrete Research, 2003, 33(1): 1-7.

[13] [13] BAO L S, ZHANG X F, YU L, et al. Study on solidification mechanism of chloride salt in base course material of cement-fly-ash-flushed-by-seawater［J］. Advanced Materials Research, 2011, 236/237/238: 755-761.

[14] [14] ANN K Y, KIM T S, KIM J H, et al. The resistance of high alumina cement against corrosion of steel in concrete［J］. Construction and Building Materials, 2010, 24(8): 1502-1510.

[15] [15] RAMACHANDRAN V S. Possible states of chloride in the hydration of tricalcium silicate in the presence of calcium chloride［J］. Matériaux et Construction, 1971, 4(1): 3-12.

[16] [16] LABBEZ C, POCHARD I, JNSSON B, et al. C-S-H/solution interface: experimental and Monte Carlo studies［J］. Cement and Concrete Research, 2011, 41(2): 161-168.

[17] [17] YOSHIDA S, ELAKNESWARAN Y, NAWA T. Electrostatic properties of C-S-H and C-A-S-H for predicting calcium and chloride adsorption［J］. Cement and Concrete Composites, 2021, 121: 104109.

[18] [18] CAO Q Y, XU Y D, FANG J K, et al. Influence of pore size and fatigue loading on NaCl transport properties in C-S-H nanopores: a molecular dynamics simulation［J］. Materials (Basel, Switzerland), 2020, 13(3): 700.

[19] [19] ZIBARA H. Binding of external chlorides by cement pastes［D］. Toronto: University of Toronto, 2001.

[20] [20] XU J X, ZHANG C K, JIANG L H, et al. Releases of bound chlorides from chloride-admixed plain and blended cement pastes subjected to sulfate attacks［J］. Construction and Building Materials, 2013, 45: 53-59.

[21] [21] MAVROPOULOU N, KATSIOTIS N, GIANNAKOPOULOS J, et al. Durability evaluation of cement exposed to combined action of chloride and sulphate ions at elevated temperature: the role of limestone filler［J］. Construction and Building Materials, 2016, 124: 558-565.

[23] [23] APPELO C A J. The anion exchange properties of AFm (hydrocalumite-group) minerals defined from solubility experiments and crystallographic information［J］. Cement and Concrete Research, 2021, 140: 106270.

[24] [24] FLOREA M V A, BROUWERS H J H. Chloride binding related to hydration products［J］. Cement and Concrete Research, 2012, 42(2): 282-290.

[25] [25] CHEN P, MA B G, TAN H B, et al. Effects of amorphous aluminum hydroxide on chloride immobilization in cement-based materials［J］. Construction and Building Materials, 2020, 231: 117171.

[26] [26] ZHAO Y F, HU X, YUAN Q, et al. Effects of water to binder ratio on the chloride binding behaviour of artificial seawater cement paste blended with metakaolin and silica fume［J］. Construction and Building Materials, 2022, 353: 129110.

[28] [28] HIRAO H, YAMADA K, TAKAHASHI H, et al. Chloride binding of cement estimated by binding isotherms of hydrates［J］. Journal of Advanced Concrete Technology, 2005, 3(1): 77-84.

[29] [29] WANG Y Y, SHUI Z H, GAO X, et al. Chloride binding capacity and phase modification of alumina compound blended cement paste under chloride attack［J］. Cement and Concrete Composites, 2020, 108: 103537.

[30] [30] YANG L, CHEN M X, LU Z Y, et al. Synthesis of CaFeAl layered double hydroxides 2D nanosheets and the adsorption behaviour of chloride in simulated marine concrete［J］. Cement and Concrete Composites, 2020, 114: 103817.

[33] [33] QIAO C Y, SURANENI P, NATHALENE WEI YING T, et al. Chloride binding of cement pastes with fly ash exposed to CaCl2 solutions at 5 and 23 ℃［J］. Cement and Concrete Composites, 2019, 97: 43-53.

[35] [35] TENG Y B, LIU S H, ZHANG Z C, et al. Effect of triethanolamine on the chloride binding capacity of cement paste with a high volume of fly ash［J］. Construction and Building Materials, 2022, 315: 125612.

[37] [37] HU X, POON C S. Chloride-related steel corrosion initiation in cement paste prepared with the incorporation of blast-furnace slag［J］. Cement and Concrete Composites, 2022, 126: 104349.

[38] [38] LI W, YI L M, JIANG W, et al. Effects of ultrafine blast furnace slag on the microstructure and chloride transport in cementitious systems under cyclic drying-wetting conditions［J］. Applied Sciences, 2022, 12(8): 4064.

[39] [39] THOMAS M D A, BAMFORTH P B. Modelling chloride diffusion in concrete［J］. Cement and Concrete Research, 1999, 29(4): 487-495.

[40] [40] QU F L, LI W G, GUO Y P, et al. Chloride-binding capacity of cement-GGBFS-nanosilica composites under seawater chloride-rich environment［J］. Construction and Building Materials, 2022, 342: 127890.

[42] [42] BABAAHMADI A, MACHNER A, KUNTHER W, et al. Chloride binding in Portland composite cements containing metakaolin and silica fume［J］. Cement and Concrete Research, 2022, 161: 106924.

[43] [43] LI S C, JIN Z Q, YU Y. Chloride binding by calcined layered double hydroxides and alumina-rich cementitious materials in mortar mixed with seawater and sea sand［J］. Construction and Building Materials, 2021, 293: 123493.

[44] [44] GUO Y Q, ZHANG T S, DU J P, et al. The chloride binding capacity and stability of gap-graded blended cement with calcined hydrotalcite and metakaolin［J］. Journal of Building Engineering, 2022, 49: 104093.

[45] [45] GARCIA R, DE LA RUBIA M A, ENRIQUEZ E, et al. Chloride binding capacity of metakaolin and nanosilica supplementary pozzolanic cementitious materials in aqueous phase［J］. Construction and Building Materials, 2021, 298: 123903.

[47] [47] MA J, WANG H N, YU Z Q, et al. A systematic review on durability of calcium sulphoaluminate cement-based materials in chloride environment［J］. Journal of Sustainable Cement-Based Materials, 2022: 1-12.

[49] [49] LOTHENBACH B, LE SAOUT G, GALLUCCI E, et al. Influence of limestone on the hydration of Portland cements［J］. Cement and Concrete Research, 2008, 38(6): 848-860.

[50] [50] QIAN R S, ZHANG Y S, LIU C, et al. Effects of supplementary cementitious materials on pore-solution chemistry of blended cements［J］. Journal of Sustainable Cement-Based Materials, 2022, 11(6): 389-407.

[51] [51] ANGST U M. Challenges and opportunities in corrosion of steel in concrete［J］.Materials and Structures, 2018, 51(1): 1-20.

[52] [52] KALOGRIDIS D, KOSTOGLOUDIS G C, FTIKOS C, et al. A quantitative study of the influence of non-expansive sulfoaluminate cement on the corrosion of steel reinforcement［J］. Cement and Concrete Research, 2000, 30(11): 1731-1740.

[53] [53] ANDAC M, GLASSER F P. Pore solution composition of calcium sulfoaluminate cement［J］. Advances in Cement Research, 1999, 11(1): 23-26.

[54] [54] WINNEFELD F, LOTHENBACH B. Hydration of calcium sulfoaluminate cements-experimental findings and thermodynamic modelling［J］. Cement and Concrete Research, 2010, 40(8): 1239-1247.

[55] [55] TANG S W, ZHU H G, LI Z J, et al. Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age［J］. Construction and Building Materials, 2015, 75: 11-18.

[56] [56] JANOTKA I, KRAJI L. An experimental study on the upgrade of sulfoaluminate-belite cement systems by blending with Portland cement［J］. Advances in Cement Research, 1999, 11(1): 35-41.

[57] [57] SEREEWATTHANAWUT I, PANSUK W, PHEINSUSOM P, et al. Chloride-induced corrosion of a galvanized steel-embedded calcium sulfoaluminate stucco system［J］. Journal of Building Engineering, 2021, 44: 103376.

[61] [61] PAUL G, BOCCALERI E, BUZZI L, et al. Friedel’s salt formation in sulfoaluminate cements: a combined XRD and 27Al MAS NMR study［J］. Cement and Concrete Research, 2015, 67: 93-102.

[62] [62] JEN G, STOMPINIS N, JONES R. Chloride ingress in a belite-calcium sulfoaluminate cement matrix［J］. Cement and Concrete Research, 2017, 98: 130-135.

[63] [63] TANG S W, YUAN J H, CAI R J, et al. Continuous monitoring for leaching of calcium sulfoaluminate cement pastes incorporated with ZnCl2 under the attacks of chloride and sulfate［J］. Chemosphere, 2019, 223: 91-98.

[64] [64] PANG F J, WEI C B, ZHANG Z Y, et al. The migration and immobilization for heavy metal chromium ions in the hydration products of calcium sulfoaluminate cement and their leaching behavior［J］. Journal of Cleaner Production, 2022, 365: 132778.

[65] [65] LI G X, BAI Z H, ZHANG G, et al. Study on properties and degradation mechanism of calcium sulphoaluminate cement-ordinary Portland cement binary repair material under seawater erosion［J］. Case Studies in Construction Materials, 2022, 17: e01440.

[66] [66] ZHANG J J, YE C B, TAN H B, et al. Potential application of Portland cement-sulfoaluminate cement system in precast concrete cured under ambient temperature［J］. Construction and Building Materials, 2020, 251: 118869.

[67] [67] BERTOLA F, GASTALDI D, IRICO S, et al. Behavior of blends of CSA and Portland cements in high chloride environment［J］. Construction and Building Materials, 2020, 262: 120852.

[68] [68] GUIRADO F, GAL S, CHINCHN J S. Thermal decomposition of hydrated alumina cement (CAH10)［J］. Cement and Concrete Research, 1998, 28(3): 381-390.

[69] [69] SON H M, PARK S M, JANG J G, et al. Effect of nano-silica on hydration and conversion of calcium aluminate cement［J］. Construction and Building Materials, 2018, 169: 819-825.

[70] [70] MIDGLEY H G. Quantitative determination of phases in high alumina cement clinkers by X-ray diffraction［J］. Cement and Concrete Research, 1976, 6(2): 217-223.

[71] [71] MOSTAFA N Y, ZAKI Z I, ABD ELKADER O H. Chemical activation of calcium aluminate cement composites cured at elevated temperature［J］. Cement and Concrete Composites, 2012, 34(10): 1187-1193.

[72] [72] KRCA , ZGR YAMAN , TOKYAY M. Compressive strength development of calcium aluminate cement-GGBFS blends［J］. Cement and Concrete Composites, 2013, 35(1): 163-170.

[73] [73] ZHU Z Y, WANG Z P, XU L L, et al. Phase-dependent study of chloride binding capacity and its relation to the properties of CAC［J］. Journal of Building Engineering, 2022, 46: 103718.

[74] [74] WANG J A, WANG S D, HENKELMAN G. Improved chloride binding stability for hydration products of calcium aluminates by phosphorus modification［J］. Journal of the American Ceramic Society, 2022, 105(7): 4870-4882.

[75] [75] JIN S H, YANG H J, HWANG J P, et al. Corrosion behaviour of steel in CAC-mixed concrete containing different concentrations of chloride［J］. Construction and Building Materials, 2016, 110: 227-234.

[76] [76] XU L L, WANG P M, ZHANG G F. Formation of ettringite in Portland cement/calcium aluminate cement/calcium sulfate ternary system hydrates at lower temperatures［J］. Construction and Building Materials, 2012, 31: 347-352.

[77] [77] LI G X, ZHANG A, SONG Z P, et al. Study on the resistance to seawater corrosion of the cementitious systems containing ordinary Portland cement or/and calcium aluminate cement［J］. Construction and Building Materials, 2017, 157: 852-859.

[78] [78] WU J, LI H M, WANG Z, et al. Transport model of chloride ions in concrete under loads and drying-wetting cycles［J］. Construction and Building Materials, 2016, 112: 733-738.

[79] [79] SCHNEIDER U, NGELE E, DUMAT F. Stress corrosion initiated cracking of concrete［J］. Cement and Concrete Research, 1986, 16(4): 535-544.

[80] [80] KIM D H, SHIMURA K, HORIGUCHI T. Effect of tensile loading on chloride penetration of concrete mixed with granulated blast furnace slag［J］. Journal of Advanced Concrete Technology, 2010, 8(1): 27-34.

[81] [81] CHEN F, GAO J M, QI B, et al. Degradation progress of concrete subject to combined sulfate-chloride attack under drying-wetting cycles and flexural loading［J］. Construction and Building Materials, 2017, 151: 164-171.

[82] [82] LI D W, LI L Y, LI P, et al. Modelling of convection, diffusion and binding of chlorides in concrete during wetting-drying cycles［J］. Marine Structures, 2022, 84: 103240.

[84] [84] GUERRERO A, GOI S, ALLEGRO V R. Effect of temperature on the durability of class C fly ash belite cement in simulated radioactive liquid waste: synergy of chloride and sulphate ions［J］. Journal of Hazardous Materials, 2009, 165(1/2/3): 903-908.

[86] [86] JIANG W Q, SHEN X H, HONG S X, et al. Binding capacity and diffusivity of concrete subjected to freeze-thaw and chloride attack: a numerical study［J］. Ocean Engineering, 2019, 186: 106093.

[87] [87] TRITTHART J. Chloride binding in cement II. The influence of the hydroxide concentration in the pore solution of hardened cement paste on chloride binding［J］. Cement and Concrete Research, 1989, 19(5): 683-691.

[88] [88] SURYAVANSHI A K, SCANTLEBURY J D, LYON S B. Mechanism of Friedel’s salt formation in cements rich in tri-calcium aluminate［J］. Cement and Concrete Research, 1996, 26(5): 717-727.

[89] [89] YUAN Q, SHI C J, DE SCHUTTER G, et al. Chloride binding of cement-based materials subjected to external chloride environment: a review［J］. Construction and Building Materials, 2009, 23(1): 1-13.

[90] [90] HEMSTAD P, MACHNER A, DE WEERDT K. The effect of artificial leaching with HCl on chloride binding in ordinary Portland cement paste［J］. Cement and Concrete Research, 2020, 130: 105976.

[91] [91] SURYAVANSHI A K, NARAYAN SWAMY R. Stability of Friedel’s salt in carbonated concrete structural elements［J］. Cement and Concrete Research, 1996, 26(5): 729-741.

[92] [92] ARYA C, BUENFELD N R, NEWMAN J B. Factors influencing chloride-binding in concrete［J］. Cement and Concrete Research, 1990, 20(2): 291-300.

[93] [93] CHEN P, MA B G, TAN H B, et al. Utilization of barium slag to improve chloride-binding ability of cement-based material［J］. Journal of Cleaner Production, 2021, 283: 124612.