[1] [1] Garai M, Sasmal N, Molla A R, et al. Structural effects of Zn+2 /Mg+2 ratios on crystallization characteristics and microstructure of fluorophlogopite mica-containing glass-ceramics［J］. Solid State Sciences, 2015, 44: 10-21.

[2] [2] El-Meliegy E M, El-Bassyouni G T. Study of the bioactivity of fluorophlogopite-whitlockite ceramics［J］. Ceramics International, 2008, 34(6): 1527-1532.

[3] [3] Mukherjee D P, Molla A R, Das S K. The influence of MgF2 content on the characteristic improvement of machinable glass ceramics［J］. Journal of Non-Crystalline Solids, 2016, 433: 51-59.

[4] [4] Garai M, Sasmal N, Molla A R, et al. Effects of nucleating agents on crystallization and microstructure of fluorophlogopite mica-containing glass-ceramics［J］. Journal of Materials Science, 2014, 49(4): 1612-1623.

[5] [5] Ma Yingren. Mica-containing glass-ceramics and its application in the field of vacuum science and technology［J］. Vacuum Science and Technology, 1985, 5(2): 62-66.

[6] [6] Ma Jiajun, Jiang Junbiao. Research on the frequency stabilization properties of total reflection prism laser gyros［J］. Chinese J Lasers, 2015, 42(1): 0102002.

[7] [7] Langfeld R, Kunze M, Letz M. Novel glass ceramics for electronic applications［J］. Materials China, 2015, 34(7-8): 558-564.

[8] [8] Diba M, Goudouri O M, Tapia F, et al. Magnesium-containing bioactive polycrystalline silicate-based ceramics and glass-ceramics for biomedical applications［J］. Current Opinion in Solid State and Materials Science, 2014, 18(3): 147-167.

[9] [9] Xing Songling, Liu Lei, Zou Guisheng, et al. Effects of femtosecond laser parameters on hole drilling of silica glass［J］. Chinese J Lasers, 2015, 42(4): 0403001.

[10] [10] Bharatish A, Murthy H N N, Anand B, et al. Characterization of hole circularity and heat affected zone in pulsed CO2 laser drilling ofalumina ceramics［J］. Optics & Laser Technology, 2013, 53: 22-32.

[11] [11] Yuan Genfu, Zeng Xiaoyan. Status and prospect of laser machining researches and applications on hard and brickle materials［J］. Laser & Optoelectronics Progress, 2002, 39(6): 47-51.

[12] [12] Wang Yuqian, Zhang Junzhan, Liu Yongsheng, et al. Effect of femtosecond laser parameters on TiC ceramic micro-hole drilling［J］. Chinese J Lasers, 2014, 41(10): 1003010.

[13] [13] Zhang Y, Wang Y Q, Zhang J Z, et al. Micromachining features of TiC ceramic by femtosecond pulsed laser［J］. Ceramics International, 2015, 41(5): 6525-6533.

[14] [14] Mishra S, Yadava V. Modeling and optimization of laser beam percussion drilling of thin aluminum sheet［J］. Optics & Laser Technology, 2013, 48: 461-474.

[15] [15] Yan Y Z, Ji L F, Bao Y, et al. An experimental and numerical study on laser percussion drilling of thick-section alumina［J］. Journal of Materials Processing Technology, 2012, 212(6): 1257-1270.

[16] [16] Wang Ruigang, Pan Wei, Jiang Mengning, et al. Development in machinable ceramics and machining technology of engineering ceramics［J］. Bulletin of the Chinese Ceramic Society, 2001, 20(3): 27-35.

[17] [17] Jiang Wei, Xie Xiaozhu, Wei Xin, et al. Pulse fiber laser controlled fracture cutting of ultrathin strontium titanate ceramic substrate［J］. Chinese J Lasers, 2016, 43(5): 0503008.

[18] [18] Montgomery D C. Design and analysis of experiments［M］. 5th ed. Cary: John Wiley & Sons, 2001: 76-86, 170-175, 638-646.

[19] [19] Kuar A S, Doloi B, Bhattacharyya B. Modelling and analysis of pulsed Nd∶YAG laser machining characteristics during micro-drilling of zirconia (ZrO2)［J］. International Journal of Machine Tools & Manufacture, 2006, 46(12-13): 1301-1310.

[20] [20] Guan Zhenzhong. Laser processing manual［M］. Beijing: China Metrology Publishing House, 2007: 84-85, 96.

[21] [21] Xia Bo, Jiang Lan, Wang Sumei, et al. Femtosecond laser drilling of micro-hole［J］. Chinese J Lasers, 2013, 40(2): 0201001.

[22] [22] Zhuang Chuqiang, Wu Yasen. Applied mathematical statistics［M］. Guangzhou: South China University of Technology Press, 2002: 321-324, 566.