Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 5, 1683(2024)

Effect of Attapulgite Clay on Working Performance and Compressive Strength of 3D Printed Cementitious Materials

WU Chunqun... HAN Kang, LI Denghui and YANG Huashan* |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    References(54)

    [1] [1] WANG Y L,WANG C F,ZHANG F Y. Review on performance requirements and related admixtures of 3D printed concrete[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1844-1854 (in Chinese).

    [2] [2] LEI B,MA Y,XIONG Y C,et al. Study on preparation method of 3D printing concrete material[J]. Concrete,2018(2): 145-149+153 (in Chinese).

    [3] [3] QI S,LI Q Y,CUI X P,et al. Research status and prospect of 3D printed concrete materials[J]. Concrete,2021(1): 36-39 (in Chinese).

    [4] [4] JIAO Z K,WANG D M,WANG Q B,et al. Influencing factors and testing methods of printability of 3D printing concrete materials[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1821-1831 (in Chinese).

    [5] [5] CHANG X D,LI W H,WANG Q. Research progress of 3D printed concrete materials and its performance test[J]. Bulletin of the Chinese Ceramic Society,2019,38(8): 2435-2441 (in Chinese).

    [6] [6] HOU S D,XIAO J Z,DUAN Z H,et al. Fresh properties of 3D printed mortar with recycled powder[J]. Construction and Building Materials,2021,309: 125186.

    [7] [7] PANDA B,UNLUER C,TAN M J. Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing[J]. Cement and Concrete Composites,2018,94: 307-314.

    [8] [8] CHEN,LI,FIGUEIREDO C,et al. Limestone and calcined clay-based sustainable cementitious materials for 3D concrete printing: a fundamental study of extrudability and early-age strength development[J]. Applied Sciences,2019,9(9): 1809.

    [9] [9] LONG W J,TAO J L,LIN C,et al. Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing[J]. Journal of Cleaner Production,2019,239: 118054.

    [10] [10] PEI Q,HU S C,DING Y. Research status and application exploration of cement-based materials modified by fly ash in building 3D printing[J]. Coal Technology,2022,41(9): 223-226 (in Chinese).

    [11] [11] FAN J,ZOU S Q,YANG Y F,et al. Experimental study on mechanical and drying shrinkage properties of high volume fly ash cement mortar[J]. Concrete,2020(6): 130-133 (in Chinese).

    [12] [12] LI W H,CHANG X D,WANG Q,et al. Effect of mineral admixture on properties of 3D printing cement-based materials[J]. Bulletin of the Chinese Ceramic Society,2020,39(10): 3101-3107+3114 (in Chinese).

    [13] [13] WU W H,LUO S R,OU X,et al. Effect of mineral admixtures on mechanical anisotropy of 3D printed cement-based materials[J]. Journal of Fuzhou University (Natural Science Edition),2023,51(2): 286-292 (in Chinese).

    [14] [14] WANG Y Q,PAN G H,ZHANG J Y. Research on application of attapulgite in building material[J]. Bulletin of the Chinese Ceramic Society,2010,29(6): 1353-1357 (in Chinese).

    [15] [15] WU Y R,JIN J,CHEN B Z,et al. Review on the application of palygorskite in building materials[J]. Bulletin of the Chinese Ceramic Society,2018,37(8): 2436-2441 (in Chinese).

    [16] [16] PANDA B,RUAN S Q,UNLUER C,et al. Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay[J]. Composites Part B: Engineering,2019,165: 75-83.

    [17] [17] HUANG Y L,YUAN Q,LIU Y Q,et al. Influence of additives on slipform construction performance of semi-fluidity self-compacting concrete[J]. Materials Reports,2019,33(supplement 1): 254-260 (in Chinese).

    [18] [18] YU Y,JIA J H,DUAN B,et al. Effects of attapulgite and nano-silica on 3D printability of high strength gypsum plaster[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1987-1996 (in Chinese).

    [19] [19] ZHOU W,ZHANG Y M,MA L,et al. Influence of printing parameters on 3D printing engineered cementitious composites (3DP-ECC)[J]. Cement and Concrete Composites,2022,130: 104562.

    [20] [20] BUSWELL R A,LEAL DE SILVA W R,JONES S Z,et al. 3D printing using concrete extrusion: a roadmap for research[J]. Cement and Concrete Research,2018,112: 37-49.

    [21] [21] MA G W,WANG L,JU Y. State-of-the-art of 3D printing technology of cementitious material: an emerging technique for construction[J]. Science China Technological Sciences,2018,61(4): 475-495.

    [22] [22] YANG H S,CHE Y J. Recycling of aggregate micro fines as a partial replacement for fly ash in 3D printing cementitious materials[J]. Construction and Building Materials,2022,321: 126372.

    [23] [23] MORTADA Y,MOHAMMAD M,MANSOOR B,et al. Development of test methods to evaluate the printability of concrete materials for additive manufacturing[J]. Materials,2022,15(18): 6486.

    [24] [24] SONEBI M,ABDALQADER A,FAYYAD T,et al. Optimisation of rheological parameters,induced bleeding,permeability and mechanical properties of supersulfated cement grouts[J]. Construction and Building Materials,2020,262: 120078.

    [25] [25] ZHANG Y,ZHANG Y S,LIU G J,et al. Fresh properties of a novel 3D printing concrete ink[J]. Construction and Building Materials,2018,174: 263-271.

    [26] [26] YANG H S,CHE Y J,SHI M Y. Influences of calcium carbonate nanoparticles on the workability and strength of 3D printing cementitious materials containing limestone powder[J]. Journal of Building Engineering,2021,44: 102976.

    [27] [27] KHALIL N,AOUAD G,EL CHEIKH K,et al. Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars[J]. Construction and Building Materials,2017,157: 382-391.

    [28] [28] TANG Z Z,JIA L T,LIN Y Q,et al. Effect of tungsten tailing powder on rheology,hydration and mechanical properties of cement-based 3D printing concrete[J]. Materials Reports,2023: 15 (in Chinese).

    [29] [29] BAZ B,AOUAD G,KLEIB J,et al. Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments[J]. Construction and Building Materials,2021,290: 123220.

    [30] [30] YE J H,ZHENG Y,YU J T,et al. Research progress on 3D printable fiber reinforced concrete[J]. Journal of the Chinese Ceramic Society,2021,49(11): 2538-2548 (in Chinese).

    [31] [31] PANDA B,CHANDRA PAUL S,JEN TAN M. Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material[J]. Materials Letters,2017,209: 146-149.

    [32] [32] CHE Y J,YANG H S. Hydration products,pore structure,and compressive strength of extrusion-based 3D printed cement pastes containing nano calcium carbonate[J]. Case Studies in Construction Materials,2022,17: e01590.

    [33] [33] WANG L,LI D L,YE K H,et al. Quantification,optimization and standardization of 3D printability of cementitious composites[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1814-1820 (in Chinese).

    [34] [34] MA G W,LI Z J,WANG L. Printable properties of cementitious material containing copper tailings for extrusion based 3D printing[J]. Construction and Building Materials,2018,162: 613-627.

    [35] [35] VARELA H,BARLUENGA G,PALOMAR I. Influence of nanoclays on flowability and rheology of SCC pastes[J]. Construction and Building Materials,2020,243: 118285.

    [36] [36] YAN J,YU X T,LIU X L,et al. Effect of nano attapulgite on properties of recycled aggregate concrete[J]. Science Technology and Engineering,2023,23(23): 10059-10066 (in Chinese).

    [37] [37] LIU J. Effecting research of air-entraining agent and attapulgite on thixotropy performance of fresh concrete[J]. China Concrete and Cement Products,2016(4): 5-9 (in Chinese).

    [38] [38] YAN J,LU C,BAI Y Q,et al. Study on the influence of calcined nano-attapulgite on splitting and bending strength of recycled concrete[J]. Journal of Jiangsu University of Science and Technology (Natural Science Edition),2023,37(4): 111-118 (in Chinese).

    [39] [39] YAN J,LIU X L,WANG X T,et al. Influence of nano-attapulgite on compressive strength and microstructure of recycled aggregate concrete[J]. Cement and Concrete Composites,2022,134: 104788.

    [40] [40] CHEN M X,LI L B,WANG J A,et al. Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite[J]. Construction and Building Materials,2020,234: 117391.

    [41] [41] RAHUL A V,SANTHANAM M,MEENA H,et al. 3D printable concrete: mixture design and test methods[J]. Cement and Concrete Composites,2019,97: 13-23.

    [42] [42] YUAN Q,ZHOU D J,KHAYAT K H,et al. On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs small amplitude oscillatory shear test[J]. Cement and Concrete Research,2017,99: 183-189.

    [43] [43] JIN Y,XU J B,SUN D T,et al. Effect of nano-silica on structural deformation,rheological and mechanical properties of 3D printed white Portland cement-based materials[J]. Bulletin of the Chinese Ceramic Society,2021,40(6): 1855-1862 (in Chinese).

    [44] [44] ROUSSEL N. A thixotropy model for fresh fluid concretes: theory,validation and applications[J]. Cement and Concrete Research,2006,36(10): 1797-1806.

    [45] [45] PERROT A,PIERRE A,VITALONI S,et al. Prediction of lateral form pressure exerted by concrete at low casting rates[J]. Materials and Structures,2015,48(7): 2315-2322.

    [46] [46] QIAN Y,KAWASHIMA S. Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes[J]. Cement and Concrete Research,2016,90: 73-79.

    [47] [47] QUANJI Z J,LOMBOY G R,WANG K J. Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes[J]. Construction and Building Materials,2014,69: 295-300.

    [48] [48] YAO H,XIE Z L,LI Z M,et al. The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite[J]. Construction and Building Materials,2022,316: 125809.

    [49] [49] PANDA B,PAUL S C,HUI L J,et al. Additive manufacturing of geopolymer for sustainable built environment[J]. Journal of Cleaner Production,2017,167: 281-288.

    [50] [50] MA G,R A,XIE P P,et al. 3D-printable aerogel-incorporated concrete: anisotropy influence on physical,mechanical,and thermal insulation properties[J]. Construction and Building Materials,2022,323: 126551.

    [51] [51] YE J H,CUI C,YU J T,et al. Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber[J]. Composites Part B: Engineering,2021,211: 108639.

    [52] [52] HOU S D,XIAO J Z,DUAN Z H. Preparation of 3D printable concrete with small coarse aggregate and its printability and mechanical properties[J]. Journal of Building Materials,2022,25(7): 730-736 (in Chinese).

    [53] [53] LI Z M,YUAN Q,ZUO S H,et al. A review on interlayer bonding of 3D printing cement-based materials[J]. China Building Materials Science & Technology,2021,30(3): 18-22 (in Chinese).

    [54] [54] PAN T H,JIANG Y Q,HE H,et al. Effect of structural build-up on interlayer bond strength of 3D printed cement mortars[J]. Materials,2021,14(2): 236.

    Tools

    Get Citation

    Copy Citation Text

    WU Chunqun, HAN Kang, LI Denghui, YANG Huashan. Effect of Attapulgite Clay on Working Performance and Compressive Strength of 3D Printed Cementitious Materials[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(5): 1683

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Special Issue:

    Received: Mar. 1, 2024

    Accepted: --

    Published Online: Aug. 15, 2024

    The Author Email: Huashan YANG (201510003@gznu.edu.cn)

    DOI:

    CSTR:32186.14.

    Topics