[1] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[2] Qin Y L, Sun B H, Zhang H et al. Development of selective laser melted aluminum alloys and aluminum matrix composites in aerospace field[J]. Chinese Journal of Lasers, 48, 1402002(2021).

[3] Ma R L, Peng C Q, Cai Z Y et al. Enhanced strength of the selective laser melted Al-Mg-Sc-Zr alloy by cold rolling[J]. Materials Science and Engineering: A, 775, 138975(2020).

[4] Wang Z H, Lin X, Tang Y et al. Laser-based directed energy deposition of novel Sc/Zr-modified Al-Mg alloys: columnar-to-equiaxed transition and aging hardening behavior[J]. Journal of Materials Science & Technology, 69, 168-179(2021).

[5] Wang Z H, Lin X, Kang N et al. Directed energy deposition additive manufacturing of a Sc/Zr-modified Al-Mg alloy: effect of thermal history on microstructural evolution and mechanical properties[J]. Materials Science and Engineering: A, 802, 140606(2021).

[6] Glerum J A, Kenel C, Sun T et al. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends[J]. Additive Manufacturing, 36, 101461(2020).

[7] Wang Z H, Lin X, Kang N et al. Making selective-laser-melted high-strength Al-Mg-Sc-Zr alloy tough via ultrafine and heterogeneous microstructure[J]. Scripta Materialia, 203, 114052(2021).

[8] He C, Li Y, Li J D et al. Effect of electromagnetic fields on microstructure and mechanical properties of sub-rapid solidification-processed Al-Mg-Si alloy during twin-roll casting[J]. Materials Science and Engineering: A, 766, 138328(2019).

[9] He C, Li S J, Li Y et al. Improvement of spatial inhomogeneity of solute elements and mechanical properties of twin-roll cast Al-Mg-Si alloy in presence of electromagnetic fields[J]. JOM, 72, 3634-3644(2020).

[10] He C, Yu W, Li Y et al. Relationship between cooling rate, microstructure evolution, and performance improvement of an Al-Cu alloy prepared using different methods[J]. Materials Research Express, 7, 116501(2020).

[11] Svetlizky D, Das M, Zheng B L et al. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications[J]. Materials Today, 49, 271-295(2021).

[12] Thompson S M, Bian L K, Shamsaei N et al. An overview of direct laser deposition for additive manufacturing. Part I: transport phenomena, modeling and diagnostics[J]. Additive Manufacturing, 8, 36-62(2015).

[13] Shamsaei N, Yadollahi A, Bian L K et al. An overview of direct laser deposition for additive manufacturing. Part II: mechanical behavior, process parameter optimization and control[J]. Additive Manufacturing, 8, 12-35(2015).

[14] Hauser T, Reisch R T, Breese P P et al. Porosity in wire arc additive manufacturing of aluminium alloys[J]. Additive Manufacturing, 41, 101993(2021).

[15] Yang K, Shi Y J, Palm F et al. Columnar to equiaxed transition in Al-Mg (-Sc)-Zr alloys produced by selective laser melting[J]. Scripta Materialia, 145, 113-117(2018).

[16] Yan T Q, Chen B Q, Tang P J et al. Effect of layer thickness on forming quality and efficiency of AlSi10Mg alloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 48, 1002106(2021).

[17] Fang X W, Zhang L J, Chen G P et al. Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering[J]. Materials Science and Engineering: A, 800, 140168(2021).

[18] Xue C P, Zhang Y X, Mao P C et al. Improving mechanical properties of wire arc additively manufactured AA2196 Al-Li alloy by controlling solidification defects[J]. Additive Manufacturing, 43, 102019(2021).

[19] Wang Z H, Lin X, Kang N et al. Laser powder bed fusion of high-strength Sc/Zr-modified Al-Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior[J]. Journal of Materials Science & Technology, 95, 40-56(2021).

[20] Li R D, Wang M B, Yuan T C et al. Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: processing, microstructure, and properties[J]. Powder Technology, 319, 117-128(2017).

[21] Mehta A, Zhou L, Huynh T et al. Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion[J]. Additive Manufacturing, 41, 101966(2021).

[22] Li R D, Wang M B, Li Z M et al. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms[J]. Acta Materialia, 193, 83-98(2020).

[23] Tan Q Y, Fan Z Q, Tang X Q et al. A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting[J]. Materials Science and Engineering: A, 821, 141638(2021).

[24] Lei Z L, Bi J, Chen Y B et al. Effect of energy density on formability, microstructure and micro-hardness of selective laser melted Sc- and Zr- modified 7075 aluminum alloy[J]. Powder Technology, 356, 594-606(2019).

[25] Gu J L, Ding J L, Williams S W et al. The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy[J]. Materials Science and Engineering: A, 651, 18-26(2016).

[26] Xie C, Wu S C, Yu Y K et al. Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling[J]. Journal of Materials Processing Technology, 291, 117039(2021).

[27] Opprecht M, Garandet J P, Roux G et al. A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting[J]. Acta Materialia, 197, 40-53(2020).

[28] Agrawal P, Gupta S, Thapliyal S et al. Additively manufactured novel Al-Cu-Sc-Zr alloy: microstructure and mechanical properties[J]. Additive Manufacturing, 37, 101623(2021).

[29] Bayoumy D, Schliephake D, Dietrich S et al. Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting[J]. Materials & Design, 198, 109317(2021).

[30] Todaro C J, Easton M A, Qiu D et al. Grain structure control during metal 3D printing by high-intensity ultrasound[J]. Nature Communications, 11, 142(2020).

[31] Yuan D, Shao S Q, Guo C H et al. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration[J]. Ultrasonics Sonochemistry, 73, 105472(2021).

[32] Hu Y, Wang L, Yao J H et al. Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding[J]. Surface and Coatings Technology, 383, 125198(2020).

[33] Lu B W, Cui X F, Jiang L P et al. Influence of electromagnetic stirring on microstructure and wear resistance of plasma arc deposited shape memory alloy[J]. Surface and Coatings Technology, 359, 125-131(2019).

[34] Bock F E, Herrnring J, Froend M et al. Experimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloys[J]. Journal of Manufacturing Processes, 64, 982-995(2021).

[35] Li L B, Li R D, Yuan T C et al. Microstructures and mechanical properties of Si and Zr modified Al-Zn-Mg-Cu alloy-a comparison between selective laser melting and spark plasma sintering[J]. Journal of Alloys and Compounds, 821, 153520(2020).

[36] Lu J L, Lin X, Kang N et al. Characterizations of micro-nano structure and tensile properties of a Sc modified Al-Mn alloy fabricated by selective laser melting[J]. Materials Characterization, 178, 111305(2021).

[37] Klein T, Schnall M, Gomes B et al. Wire-arc additive manufacturing of a novel high-performance Al-Zn-Mg-Cu alloy: processing, characterization and feasibility demonstration[J]. Additive Manufacturing, 37, 101663(2021).

[38] Xu R, Li R D, Yuan T C et al. Microstructure, metallurgical defects and hardness of Al-Cu-Mg-Li-Zr alloy additively manufactured by selective laser melting[J]. Journal of Alloys and Compounds, 835, 155372(2020).

[39] Rosli N A, Alkahari M R, Abdollah M F B et al. Review on effect of heat input for wire arc additive manufacturing process[J]. Journal of Materials Research and Technology, 11, 2127-2145(2021).

[40] Rao H, Giet S, Yang K et al. The influence of processing parameters on aluminium alloy A357 manufactured by selective laser melting[J]. Materials & Design, 109, 334-346(2016).

[41] Shi Y J, Yang K, Kairy S K et al. Effect of platform temperature on the porosity, microstructure and mechanical properties of an Al-Mg-Sc-Zr alloy fabricated by selective laser melting[J]. Materials Science and Engineering: A, 732, 41-52(2018).