Optics and Precision Engineering, Volume. 11, Issue 5, 425(2003)

[in Chinese]

[in Chinese]... [in Chinese] and [in Chinese] |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    References(22)

    [1] [1] KRAFT, M. Closed loop accelerometer employing oversampling conversion[D].Coventry University, Ph.D. dissertation, 1997.

    [2] [2] BOSER B E,HOWE R T. Surface micromachined accelerometers[J]. IEEE J Solid-State Circuits,1996,31(3):336-375.

    [3] [3] Analog Devices.ADXL05 - monolithic accelerometer with signal conditioning[Z]. 1995.

    [4] [4] SEIDEL H, FRITSCH U, GOTTINGER R, et al. A piezoresistive silicon accelerometer with monolithically integrated CMOS-circuitry[A]. Tech Dig 8th Int Conf Solid-State Sensors and Actuators (Transducers'95)[C]. Stockholm,Sweden,1995,597-600.

    [5] [5] ROCKSTAD H K, TANG T K, REYNOLD S. A miniature, high-sensitivity, electron tunneling accelerometer[J]. Sensors and Actuators, 1996,53:227-231.

    [6] [6] BURNS D W, HORNING R D, HERB W R, et al. Sealed-cavity resonant microbeam accelerometer[J]. Sensors and Actuators, 1996,A53:249-255.

    [7] [7] SPINEANU A, BENABES P, KIELBASA R. A piezoelectric accelerometer with sigma-delta servo technique[J]. Sensors and Actuators, 1997,A60,127-133.

    [8] [8] LEMKIN M A, BOSER B. A three-axis micromachined accelerometer with a CMOS position-sense interface and digital offset-trim electronics[J]. IEEE J Solid-State Circuits, 1999,34(4),456-468.

    [9] [9] XUESONG J, SEEGER J I, KRAFT M, et al. A monolithic surface micromachined Z-axis gyroscope with digital output[A]. To be Published at the Symposium on VLSI Circuits[C]. Hawaii, USA, 2000.

    [10] [10] KRAFT M. Micromachined inertial sensors state of the art and a look into the future[EB/OL].http://www.sensor.com/

    [11] [11] ROYLANCE L M, ANGELL J B. A batch-fabricated silicon accelerometer[J]. IEEE Trans Electron Devices, 1979,ED-26:1911-1917.

    [12] [12] KRAFT M, LEWIS C P, HESKETH T G. Closed loop silicon accelerometers[J]. IEE Proceedings-Circuits, Devices and Systems, 1998,145(5):325-331.

    [13] [13] LEMKIN M A. Micro accelerometer design with digital feedback control[D].University of California, Berkeley, Ph.D. dissertation, 1997.

    [14] [14] de COULON Y, SMITH T, HERMANN J. Design and test of a precision servo accelerometer with digital output[A]. 7th Int Conf Solid-State Sensors and Actuators (Transducer '93)[C]. Yokohama, 1993.

    [15] [15] FUKATSU K, MURAKOSHI T, ESASHI M. Electrostatically levitated micro motor for inertia measurement system[A]. Transducer '99[C]. 1999.

    [16] [16] RUDOLF F, JORNOD A,BENCZE P. Silicon microaccelerometers[A]. 4th Int Conf Solid-State Sensors and Actuators (Transducers'87)[C]. Tokyo, Japan, 1987, 376-379.

    [17] [17] RUDOLF F, JORNOD A, BERQOVIST J. Precision accelerometers with g resolution[J]. Sensors Actuators,1990,A21-A23,297-302.

    [18] [18] HENRION W, DISANZA L, TERRY M Ip S, et al. Wide-dynamic range direct digital accelerometer[A]. Solid-State Sensors and Actuators Workshop[C], Hilton Head Island, SC, 1990, 153-156.

    [19] [19] SHERMAN S J, TSANG W K, CORE T A. A low-cost monolithic accelerometer: Product/technology update[A]. IEEE Electron Devices Meeting (IEDM'92)[C]. Dec. 1992,160-161.

    [20] [20] RISTIC L, GUTTERIDGE R, KUNG J. A capacitive type accelerometer with self-test feature based on a double-pinned polysilicon structure[A]. 7th Int Conf Solid-State Sensors and Actuators (Transducers'93)[C]. Yokohama, Japan, June 1993, 810-812.

    [21] [21] LEMKIN M, BOSER B, SMITH J. A 3-axis surface micromachined accelerometer[A]. Solid State Circuits Conf (ISSCC'97)[C]. San Francisco, CA, Feb. 1997, 202-203.

    [22] [22] BERNSTEIN J, CHO S, KING A T. A micromachined comb-drive tuning fork rate gyroscope[A]. IEEE Micro Electro Mechanical Systems Workshop (MEMS'93)[C]. Fort Lauderdale, FL,1993, 143-148.

    CLP Journals

    [1] SHI Yun-bo, YANG Zhi-cai, CAO Hui-liang, ZHI Dan, CHEN Yan-xiang, WANG Yan-yang. Dynamic linearity calibration system for accelerometers with high measurement range[J]. Optics and Precision Engineering, 2016, 24(2): 381

    [2] SHI Qin, SU Yan, QIU An-ping, ZHU Xin-hua. Device level vacuum packaging technologies of MEMS gyroscopes[J]. Optics and Precision Engineering, 2009, 17(8): 1987

    [3] ZHAO Yang, QIU An-ping, SHI Qin, ZHAO Jian. Modeling of sensing interface for micromachined gyroscope and its front-end optimization[J]. Optics and Precision Engineering, 2013, 21(7): 1734

    [4] XIA Guo-ming, YANG Bo, WANG Shou-rong. Digital self-oscillation driving technology for silicon micro machined gyroscopes[J]. Optics and Precision Engineering, 2011, 19(3): 635

    [5] TAO Yong-kang, LIU Yun-feng, DONG Jing-xin. Design and experiment of high-overload capacitive micro-machined accelerometers[J]. Optics and Precision Engineering, 2014, 22(4): 918

    [6] ZHOU Hao, SU Wei, LIU Xian-xue, TANG Hai-lin. Development of decoupled z-axis micromachined gyroscope[J]. Optics and Precision Engineering, 2011, 19(9): 2123

    [7] ZHAO Yang, QIU An-ping, SHI Qin, XIA Guo-ming, ZHAO Jian. Optimization of bias stability for silicon microgyroscope[J]. Optics and Precision Engineering, 2014, 22(9): 2381

    Tools

    Get Citation

    Copy Citation Text

    [in Chinese], [in Chinese], [in Chinese]. [J]. Optics and Precision Engineering, 2003, 11(5): 425

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: May. 28, 2003

    Accepted: --

    Published Online: Nov. 3, 2006

    The Author Email:

    DOI:

    Topics