Spectroscopy and Spectral Analysis, Volume. 31, Issue 7, 1946(2011)
Determination of Trace Silver in Water Samples by Solid Phase Extraction Portable Tungsten-Coil Electrothermal Atomic Absorption Spectrometry
A simple method has been developed for the determination of silver in environmental water samples using solid phase extraction with tungsten-coil electrothermal atomic absorption spectrometry. Silica gel was used as an adsorbent and packed into a syringe barrel for solid phase extraction of silver prior to its determination by using a portable tungsten-coil electrothermal atomic absorption spectrometer. Optimum conditions for adsorption and desorption of silver ion, as well as interferences from co-existing ions, were investigated. A sample pH value of 6.0, a sample loading flow rate of 4.0 mL·min-1, and the mixture of 4%(m/v) thiourea and 2%(φ) nitrate acid with the eluent flow rate of 0.5 mL·min-1 for desorption were selected for further studies. Under optimal conditions, a linear range of 0.20~4.00 ng·mL-1, a limit of detection (3σ) of 0.03 ng·mL-1 and a preconcentration factor of 94 were achieved. The proposed method was validated by testing three environmental water samples with satisfactory results.
Get Citation
Copy Citation Text
[in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Determination of Trace Silver in Water Samples by Solid Phase Extraction Portable Tungsten-Coil Electrothermal Atomic Absorption Spectrometry[J]. Spectroscopy and Spectral Analysis, 2011, 31(7): 1946
Received: Aug. 26, 2010
Accepted: --
Published Online: Aug. 29, 2011
The Author Email: (gyfan2006@yahoo.com.cn)